#include "GlobalEnums.h"

Macros
#define	UNICODE

#define	_UNICODE

#define	tstring std::wstring

#define	tostream std::wostream

#define	VPN_VPNAPI __declspec(dllimport)

#define	OUT

#define	IN

Enumerations
enum	MessageType { MsgType_Error, MsgType_Alert, MsgType_Warn, MsgType_Info, MsgType_Status, MsgType_UrlError, MsgType_Announcement, MsgType_Ephemeral_Alert }

enum	SDITokenType { SDITT_NONE, SDITT_HARDWARE, SDITT_SOFTWARE }

enum	VPNState { CONNECTED = STATE_CONNECTED, DISCONNECTED = STATE_DISCONNECTED, CONNECTING = STATE_CONNECTING, DISCONNECTING = STATE_DISCONNECTING, RECONNECTING = STATE_RECONNECTING, PAUSING = STATE_PAUSING, PAUSED = STATE_PAUSED, SSOPOLLING = STATE_SSOPOLLING, UNKNOWN = ~0 }

enum	VPNSubState { VPNSS_NORMAL = VCSS_NORMAL, VPNSS_INDEFINITE_DELAY = VCSS_INDEFINITE_DELAY, VPNSS_SESSION_EXPIRING = VCSS_SESSION_EXPIRING, VPNSS_MT_DISCONNECTED_DISABLED = VCSS_MT_DISCONNECTED_DISABLED, VPNSS_MT_DISCONNECTED_TRUSTED_NW = VCSS_MT_DISCONNECTED_TRUSTED_NW, VPNSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE = VCSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE, VPNSS_MT_DISCONNECTED_LAUNCH_FAILED = VCSS_MT_DISCONNECTED_LAUNCH_FAILED, VPNSS_MT_DISCONNECTED_CONNECT_FAILED = VCSS_MT_DISCONNECTED_CONNECT_FAILED, VPNSS_MT_DISCONNECTED_BAD_VPN_CONFIG = VCSS_MT_DISCONNECTED_BAD_VPN_CONFIG, VPNSS_MT_DISCONNECTED_SW_UP_PENDING = VCSS_MT_DISCONNECTED_SW_UP_PENDING, VPNSS_MTU_ADJUSTMENT_PENDING = VCSS_MTU_ADJUSTMENT_PENDING }

enum	WMHint { MINIMIZE, OPEN, QUIT, REFRESHHOSTNAMES, REFRESHPREFS, SHOWCONNECTING, CLOSECREDENTIALPOPUP }

enum	WMHintReason { SECONDGUISTART, PROXYREQUEST, SERVICEFAILURE, DISCONNECT, SERVICESTOPPED, CONNECT, REASONUNKNOWN }

enum	ConnectPromptType { CERTIFICATE, CREDENTIALS, PROXY, MANUAL_PKCS12_IMPORT, STATUS, SINGLESIGNON, SINGLELOGOUT, LEGACY_SINGLESIGNON }

enum	PromptType { Prompt_Input, Prompt_Password, Prompt_Banner, Prompt_Combo, Prompt_Header, Prompt_Hidden, Prompt_CheckBox, Prompt_SSO }

enum	PreferenceId { ServiceDisable, CertificateStoreOverride, CertificateStore, CertificateStoreMac, CertificateStoreLinux, ShowPreConnectMessage, AutoConnectOnStart, MinimizeOnConnect, LocalLanAccess, DisableCaptivePortalDetection, AutoReconnect, AutoReconnectBehavior, SuspendOnConnectedStandby, UseStartBeforeLogon, AutoUpdate, RSASecurIDIntegration, WindowsLogonEnforcement, WindowsVPNEstablishment, LinuxLogonEnforcement, LinuxVPNEstablishment, ProxySettings, AllowLocalProxyConnections, PPPExclusion, PPPExclusionServerIP, AutomaticVPNPolicy, TrustedNetworkPolicy, UntrustedNetworkPolicy, BypassConnectUponSessionTimeout, TrustedDNSDomains, TrustedDNSServers, TrustedHttpsServerList, DisableUntrustedInterfaces, AlwaysOn, ConnectFailurePolicy, AllowCaptivePortalRemediation, CaptivePortalRemediationTimeout, ApplyLastVPNLocalResourceRules, AllowVPNDisconnect, SuppressConnectionRetries, AllowedHosts, EnableScripting, TerminateScriptOnNextEvent, EnablePostSBLOnConnectScript, AutomaticCertSelection, RetainVpnOnLogoff, UserEnforcement, DeviceLockRequired, DeviceLockMaximumTimeoutMinutes, DeviceLockMinimumPasswordLength, DeviceLockPasswordComplexity, EnableAutomaticServerSelection, AutoServerSelectionImprovement, AutoServerSelectionSuspendTime, AuthenticationTimeout, SafeWordSofTokenIntegration, AllowIPsecOverSSL, ClearSmartcardPin, IPProtocolSupport, CaptivePortalRemediationBrowserFailover, AllowManualHostInput, BlockUntrustedServers, PublicProxyServerAddress, CertificatePinning, UnknownPreference }

enum	PreferenceScope { User, Global, UserAndGlobal }

enum	OperatingMode { FIPS = (1 << 0), StartBeforeLogon = (1 << 1), GUI = (1 << 2), TrustedNetworkDetection = (1 << 3), AlwaysOnVpn = (1 << 4), NetworkIssue = (1 << 5), Quarantined = (1 << 6), AutomaticHeadendSelection = (1 << 7), DisconnectAllowed = (1 << 8), VPNDisabled = (1 << 9), SCEPMode = (1 << 10), OnTrustedNetwork = (1 << 11), ManualHostInputAllowed = (1 << 12), ErrorSuppressed = (1 << 13), StrictMode = (1 << 14), CLI = (1 << 15), Management = (1 << 16) }

enum	VPNError { VPNSuccess = 0, VPNError_Generic_FatalError = 1, VPNError_Connection_Error = 100, VPNError_Connection_InvalidGroupURL, VPNError_Network_Error = 200, VPNError_Authentication_Error = 300, VPNError_Authentication_DAP_Terminate, VPNError_ClientCertificate_UnknownError = 400, VPNError_ClientCertificate_Missing, VPNError_ClientCertificate_Expired, VPNError_ClientCertificate_NotYetValid, VPNError_ServerCertificate_UnknownError = 500, VPNError_ServerCertificate_Expired, VPNError_ServerCertificate_NotYetValid }

enum	CertAuthMode { CertAuth_Automatic, CertAuth_Disabled, CertAuth_Manual }

enum	CertificateType { CertificateType_Client, CertificateType_SystemTrusted, CertificateType_Server }

enum	CertConfirmReason { CertConfirmReason_Unspecified, CertConfirmReason_NameMismatch, CertConfirmReason_Expired, CertConfirmReason_NotValidYet, CertConfirmReason_UntrustedSource, CertConfirmReason_InvalidUse, CertConfirmReason_Revoked, CertConfirmReason_Malformed, CertConfirmReason_NotFipsCompliant, CertConfirmReason_InvalidateDate, CertConfirmReason_SignatureAlgorithm, CertConfirmReason_KeySize }

enum	UserResponseError { UserResponseError_None, UserResponseError_Unspecified, UserResponseError_BadServerCert, UserResponseError_SsoNavigation, UserResponseError_SsoGettingCookie, UserResponseError_SsoTimeout, UserResponseError_SsoMissingDependency, UserResponseError_SsoClientCertRequest, UserResponseError_SsoAborted }

enum	ClientType { ClientType_GUI, ClientType_GUI_SBL, ClientType_CLI, ClientType_MGMT }

Detailed Description

This file contains some basic compiler definitions as well as common enums.

Macro Definition Documentation

◆ tstring

#define tstring std::wstring

std::wstring my wstring description

Enumeration Type Documentation

◆ CertAuthMode

enum CertAuthMode

Enumerator
CertAuth_Automatic	Will try each available certificate in succession until authentication is obtained or we run out of available certificates
CertAuth_Disabled	Will disable Certificate Based Authentication
CertAuth_Manual	Will only use preconfigured certificate to attempt Certificate Based Authentication

 {
     CertAuth_Automatic, /**< Will try each available certificate in succession
                              until authentication is obtained or we run out of 
                              available certificates */
     CertAuth_Disabled,  /**< Will disable Certificate Based Authentication */
     CertAuth_Manual     /**< Will only use preconfigured certificate to attempt
                              Certificate Based Authentication */
 };

◆ ConnectPromptType

enum ConnectPromptType

provides an indication of the type of credential data being requested.

Enumerator
CERTIFICATE	Indicates a certificate-only type of connection and would not normally be sent to client unless a post-authentication banner is to be displayed.
CREDENTIALS	Indicates that the user is to be prompted for authentication credentials
PROXY	Indicates that the user is to be prompted for proxy-authentication credentials
MANUAL_PKCS12_IMPORT	Indicates that the user is to be prompted for passwords related to PKCS12 import
STATUS	Indicates that status messages are to be displayed to the user
SINGLESIGNON	Indicates an embedded browser based single sign-on authentication method is requested.
SINGLELOGOUT	Indicates an embedded browser based single sign-on authentication logout is requested.
LEGACY_SINGLESIGNON	(deprecated) Indicates a browser based single sign-on authentication method is requested.

 {
     CERTIFICATE,    /**< Indicates a certificate-only type of connection and
                          would not normally be sent to client unless a
                          post-authentication banner is to be displayed. */
     CREDENTIALS,    /**< Indicates that the user is to be prompted for authentication
                          credentials */
     PROXY,          /**< Indicates that the user is to be prompted for
                          proxy-authentication credentials */
     MANUAL_PKCS12_IMPORT, /**< Indicates that the user is to be prompted for passwords related
                               to PKCS12 import*/
     STATUS,         /**< Indicates that status messages are to be displayed to
                          the user*/
     SINGLESIGNON,   /**< Indicates an embedded browser based single sign-on authentication method is requested. */
     SINGLELOGOUT,   /**< Indicates an embedded browser based single sign-on authentication logout is requested. */
     LEGACY_SINGLESIGNON,   /**< (deprecated) Indicates a browser based single sign-on authentication method is requested. */
 };

◆ MessageType

enum MessageType

MessageType presents a level of severity associated with messages that are sent to the API. The severity can be useful for deciding how a message is to be shown. A UI might decide based on type to show a message as a modal dialog versus a message written to the status area for an existing UI.

Enumerator
MsgType_Error	Issue usually requiring user to acknowledge
MsgType_Alert	Warning message that must be shown to user.
MsgType_Warn	Less severe, not required to be shown to user
MsgType_Info	General message providing status, progress, etc.
MsgType_Status	Can be used to indicate unexpected tunnel status change.
MsgType_UrlError	Error message that provides additional information by opening browser.
MsgType_Announcement	Informational message that must be shown to the user. Announcements are currently only supported on desktop platforms.
MsgType_Ephemeral_Alert	Warning message that must be shown to the user, but is closed by the occurrence of an error, announcement, or alert message. Ephemeral Alerts are currently only supported on desktop platforms

 {
     MsgType_Error,      /**< Issue usually requiring user to acknowledge */
     MsgType_Alert,      /**< Warning message that must be shown to user. */
     MsgType_Warn,       /**< Less severe, not required to be shown to user */
     MsgType_Info,       /**< General message providing status, progress, etc. */
     MsgType_Status,     /**< Can be used to indicate unexpected tunnel status change. */
     MsgType_UrlError,   /**< Error message that provides additional information by opening browser. */
     MsgType_Announcement,/**< Informational message that must be shown to the user.
                              Announcements are currently only supported on desktop platforms. */
     MsgType_Ephemeral_Alert,/**< Warning message that must be shown to the user, but is closed by
                              the occurrence of an error, announcement, or alert message.
                              Ephemeral Alerts are currently only supported on desktop platforms */
 };

◆ OperatingMode

enum OperatingMode

Indicates the client mode of operation. Unlike tunneling mode or other mutually exclusive modes, client operating modes are independent settings, several of which can be turned on simultaneously.

Enumerator
FIPS	Indicates that the client is running in FIPS mode.
StartBeforeLogon	Indicates that the client is running in Start Before Login mode.
GUI	Indicates that the client is a GUI client.
TrustedNetworkDetection	Indicates that a Trusted Network Detection policy is enabled for the client.
AlwaysOnVpn	Indicates that the Always On policy is enabled for the client.
NetworkIssue	For user notifications only. Indication by API to the UI that there is a network condition.
Quarantined	Indicates that the VPN session is being Quarantined by the secure gateway.
AutomaticHeadendSelection	Indicates that Automatic Headend is enabled.
DisconnectAllowed	Indicates that the user is allowed to disconnect the VPN based on policy.
VPNDisabled	Indicates that the VPN service is to be marked as disabled.
SCEPMode	Indicates that the client is performing a SCEP cert enrollment.
OnTrustedNetwork	Indicates that at last check, the client detected that it was on a trusted network.
ManualHostInputAllowed	Indicates that the user is allowed to add a new host by typing its name in the VPN edit box.
ErrorSuppressed	Indicates a connection error has been returned fronm the agent, but was suppressed to warning to prevent popup dialog in the UI.
StrictMode	Indicates that the client is running in strict certificate trust mode.
CLI	Indicates that the client is a CLI client.
Management	Indicates that the client is strictly used for initiating a management tunnel.

 {
     FIPS                     = (1 << 0), /**< Indicates that the client is 
                                               running in FIPS mode. */
     StartBeforeLogon         = (1 << 1), /**< Indicates that the client is 
                                               running in Start Before Login 
                                               mode. */
     GUI                      = (1 << 2), /**< Indicates that the client is 
                                               a GUI client. */
     TrustedNetworkDetection  = (1 << 3), /**< Indicates that a Trusted Network
                                               Detection policy is enabled for
                                               the client. */
     AlwaysOnVpn              = (1 << 4), /**< Indicates that the Always On 
                                               policy is enabled for the client. */
     NetworkIssue             = (1 << 5), /**< For user notifications only.
                                               Indication by API to the UI that
                                               there is a network condition. */
     Quarantined              = (1 << 6), /**< Indicates that the VPN session is being 
                                               Quarantined by the secure gateway. */
     AutomaticHeadendSelection= (1 << 7), /**< Indicates that Automatic Headend
                                               is enabled. */
     DisconnectAllowed        = (1 << 8), /**< Indicates that the user is allowed
                                               to disconnect the VPN based on 
                                               policy. */
     VPNDisabled              = (1 << 9), /**< Indicates that the VPN service is
                                               to be marked as disabled. */
     SCEPMode                 = (1 << 10), /**< Indicates that the client is
                                                performing a SCEP cert enrollment. */
     OnTrustedNetwork         = (1 << 11), /**< Indicates that at last check, the
                                                client detected that it was on
                                                a trusted network. */
     ManualHostInputAllowed   = (1 << 12), /**< Indicates that the user is allowed
                                                to add a new host by typing its name
                                                in the VPN edit box. */
     ErrorSuppressed          = (1 << 13), /**< Indicates a connection error has
                                                been returned fronm the agent, but
                                                was suppressed to warning to 
                                                prevent popup dialog in the UI. */
     StrictMode               = (1 << 14), /**< Indicates that the client is 
                                                running in strict certificate trust mode. */
     CLI                      = (1 << 15), /**< Indicates that the client is
                                                a CLI client. */
     Management               = (1 << 16)  /**< Indicates that the client is strictly
                                                used for initiating a management tunnel. */
 };

◆ PreferenceId

enum PreferenceId

Enumerator
ServiceDisable	This preference disable the VPN service. If more than one profile exists and any one profile has VPN enabled, then it will be enabled. False is the default.
CertificateStoreOverride	This preference will trigger an alternate authentication sequence in the API. The preference is only settable by an administrator.
CertificateStore	This preference indicates which Windows certificate store AnyConnect should look in for client certificates. The options are All, Machine and User with a default of All. The preference is only settable by an administrator.
CertificateStoreMac	This preference indicates which macOS keychain AnyConnect should look in for client certificates. The options are All, System and Login with a default of All. The preference is only settable by an administrator.
CertificateStoreLinux	This preference indicates which Linux certificate store AnyConnect should look in for client certificates. The options are All, Machine and User with a default of All. The preference is only settable by an administrator.
ShowPreConnectMessage	The ShowPreConnectMessage preference gives the administrator the ability to display an AnyConnect startup banner message. The message will appear only once per AnyConnect program start. The preference is only settable by an administrator.
AutoConnectOnStart	This preference allows the user to select whether to establish a connection automatically on startup or not.
MinimizeOnConnect	This preference allows the user to select if the GUI should minimize when the connection is established
LocalLanAccess	This preference will provide a mechanism where the user can disable access to their Local LAN.
DisableCaptivePortalDetection	This preference will provide a mechanism where the user can disable captive portal detection.
AutoReconnect	First control of the reconnect behavior. If the client becomes disconnected for any reason, a reconnect attempt is made.
AutoReconnectBehavior	Second control of the reconnect behavior. When coming out of suspend/hibernate/standby mode. Options are disconnect on suspend and reconnect after suspend.
SuspendOnConnectedStandby	This setting allows to control whether the VPN tunnel is suspended when the system enters the Connected Standby mode. It applies only to Windows 8 and above.
UseStartBeforeLogon	This preference allows an administrator to control the use of the Start Before Logon feature. The preference can be set to true (on) or false (off).
AutoUpdate	Once the Downloader has loaded the profile, it can check the AutoUpdate preference to see if updates are either disabled or enabled
RSASecurIDIntegration	This preference will enable the administrator and possibly end user to select the preferred method of managing their SDI PIN and PASSCODE interactions. Options are Automatic (default), SoftwareTokens and HardwareTokens.
WindowsLogonEnforcement	This preference allows an administrator to control if more than one user may be logged into the client PC during the VPN connection (Windows only).
WindowsVPNEstablishment	This preference allows an administrator to control whether or not remote users may initiate a VPN connection (Windows only).
LinuxLogonEnforcement	This preference allows an administrator to control if more than one user may be logged into the client PC during the VPN connection (Linux only).
LinuxVPNEstablishment	This preference allows an administrator to control whether or not remote users may initiate a VPN connection (Linux only).
ProxySettings	This preference allows an administrator to control how user's proxy setups are handled.
AllowLocalProxyConnections	This preference allows the administrator to control whether to allow establishing a connection through a local proxy.
PPPExclusion	This preference allows an administrator to control the policy used to exclude routes to PPP servers when connecting over L2TP or PPTP. Options are Automatic (default), Disable, and Override.
PPPExclusionServerIP	When PPPExclusion is set to Manual, the value of this preference allows an end user to specify the address of a PPP server that should be excluded from tunnel traffic.
AutomaticVPNPolicy	This preference allows an administrator to define a policy to automatically manage when a VPN connection should be started or stopped.
TrustedNetworkPolicy	This preference allows an administrator to define a policy for users in trusted networks. The options are: Disconnect or DoNothing.
UntrustedNetworkPolicy	This preference allows an administrator to define a policy for users in untrusted networks. The options are: Connect or DoNothing.
BypassConnectUponSessionTimeout	This preference allows an administrator the ability to instruct the client to bypass the automatic connection retry after a VPN session timeout.
TrustedDNSDomains	This preference defines a list of comma separated DNS suffixes that a network interface in a trusted network might have.
TrustedDNSServers	This preference defines a list of comma separated DNS servers that a network interface in a trusted network might have.
TrustedHttpsServerList	This preference defines a list of comma separated https servers reachable only via a trusted network.
DisableUntrustedInterfaces	This preference disables interface without trusted server connectivity while in trusted network when there are multiple network interfaces.
AlwaysOn	This preference governs VPN reestablishment after interruptions
ConnectFailurePolicy	This preference gives the network administrator the ability to dictate the network access allowed by the client endpoint device following a VPN connection establishment failure. It is a component of AlwaysOn
AllowCaptivePortalRemediation	This preference gives the network administrator the ability to dictate the network access allowed by the client endpoint device following a VPN connection establishment failure it is a component of AlwaysOn
CaptivePortalRemediationTimeout	This preference allows the network administrator the ability to impose a time limit for captive portal remediation when the ConnectFailurePolicy value is Closed It is a component of AlwaysOn
ApplyLastVPNLocalResourceRules	This preference gives the network administrator the ability to allow split routes and firewall rules to be applied following a VPN connection establishment failure when the ConnectFailurePolicy value is Closed It is a component of AlwaysOn
AllowVPNDisconnect	During Always On, this specifies that the user is allowed to disconnect the VPN session.
SuppressConnectionRetries	During Always On, this preference gives the network administrator the ability to suppress the VPN connection retry attempts
AllowedHosts	During Always On, user has access to the specified hosts when VPN is disconnected.
EnableScripting	This preference allows an administrator to enable scripting (on connect or on disconnect).
TerminateScriptOnNextEvent	This preference dictates whether or not AnyConnect will terminate a running script process if a transition to another scriptable event occurs.
EnablePostSBLOnConnectScript	This preference is used to control whether or not the OnConnect script will be launched from the desktop GUI when a tunnel has been established via SBL.
AutomaticCertSelection	This preference dictates whether or not to disable the default automatic certificate selection for user certificates. If disabled, a certificate selection dialog is displayed. This only applies if the GUI is enabled and not SBL. This only applies to Windows (not WinMobile).
RetainVpnOnLogoff	First control of the logoff behavior. This preference allows an administrator to control if the VPN is terminated or retained after user logs off.
UserEnforcement	Second control of the logoff behavior. When the VPN connection has been retained after user logged off. Controls what user can log in and keep the VPN connection. Options are same user only and any user.
DeviceLockRequired	This preference indicates whether or not a Windows Mobile device must be configured with a password or PIN prior to establishing a VPN connection. This configuration is only valid on Windows Mobile devices that use the Microsoft Default Local Authentication Provider (LAP).
DeviceLockMaximumTimeoutMinutes	When set to a non-negative number, this preference specifies the maximum number of minutes a device can be inactive before device lock takes into effect. (WM5/WM5AKU2+)
DeviceLockMinimumPasswordLength	When set to a non-negative number, this preference specifies that any PIN/password used for device lock must be equal to or longer than the specified value, in characters. This setting must be pushed down to the mobile device by syncing with an Exchange server before it can be enforced. (WM5AKU2+)
DeviceLockPasswordComplexity	This preference checks whether or not the password belongs to one of three subtypes: alpha, pin, strong
EnableAutomaticServerSelection	Automatic server selection will automatically select the optimal secure gateway for the endpoint
AutoServerSelectionImprovement	During a reconnection attempt after a system resume, this setting specifies the minimum estimated performance improvement required to justify transitioning a user to a new server This value represents percentage in 0..100
AutoServerSelectionSuspendTime	During a reconnection attempt after a system resume, this specifies the minimum time a user must have been suspended in order to justify a new server selection calculation. Unit is hours
AuthenticationTimeout	Time, in seconds, that the client waits for authentication to be completed.
SafeWordSofTokenIntegration	This preference will enable the administrator and possibly the end user to enable SafeWord SofToken integration. Options are Enabled (true) and Disabled (false - default).
AllowIPsecOverSSL	if 'true' then tunneling of IPSEC over SSL is made possible with help from the ASA.
ClearSmartcardPin	This preference controls whether the smartcard pin will be cleared on a successful connection
IPProtocolSupport	This preference controls which protocol(s) will be allowed for the connection
CaptivePortalRemediationBrowserFailover	This preference is applicable to enhanced captive portal remediation and specifies whether the user is allowed to opt for an external browser for remediation, as opposed to the AnyConnect browser.
AllowManualHostInput	This preference specifies whether the user is allowed to type a new hostname in the VPN edit box.
BlockUntrustedServers	This preference specifies whether the user wants to allow for connections to secure gateways with certificate errors.
PublicProxyServerAddress	This preference specifies the public proxy server address to be used. This number is in the format ServerAddr:ServerPort (ex. 101.89.85.444:8080) or just the FQDN.
CertificatePinning	This preference specifies whether Certificate Pinning check should be performed during server certificate verification.

 {
     ServiceDisable,             /**< This preference disable the VPN service.  
                                  If more than one profile exists and any one
                                  profile has VPN enabled, then it will be
                                  enabled.  False is the default. */
     CertificateStoreOverride,/**< This preference will trigger an alternate 
                                  authentication sequence in the API. The 
                                  preference is only settable by an 
                                  administrator. */
     CertificateStore,       /**< This preference indicates which Windows certificate 
                                  store AnyConnect should look in for client certificates.
                                  The options are All, Machine and User with a default of All.
                                  The preference is only settable by an administrator. */
     CertificateStoreMac,    /**< This preference indicates which macOS keychain
                                  AnyConnect should look in for client certificates. 
                                  The options are All, System and Login with a default of All. 
                                  The preference is only settable by an administrator. */
     CertificateStoreLinux,  /**< This preference indicates which Linux certificate
                                  store AnyConnect should look in for client certificates. 
                                  The options are All, Machine and User with a default of All. 
                                  The preference is only settable by an administrator. */
     ShowPreConnectMessage,  /**< The ShowPreConnectMessage preference gives the
                                  administrator the ability to display an AnyConnect 
                                  startup banner message. The message will appear 
                                  only once per AnyConnect program start. The  
                                  preference is only settable by an 
                                  administrator. */
     AutoConnectOnStart,     /**< This preference allows the user to select 
                                  whether to establish a connection automatically
                                  on startup or not. */
     MinimizeOnConnect,      /**< This preference allows the user to select if
                                  the GUI should minimize when the connection is
                                  established */
     LocalLanAccess,         /**< This preference will provide a mechanism where 
                                  the user can disable access to their Local LAN. */
     DisableCaptivePortalDetection, /**<This preference will provide a mechanism where
                                    the user can disable captive portal detection.*/
     AutoReconnect,          /**< First control of the reconnect behavior. If the 
                                  client becomes disconnected for any reason, a 
                                  reconnect attempt is made.   */
     AutoReconnectBehavior,  /**< Second control of the reconnect behavior. When
                                  coming out of suspend/hibernate/standby mode. 
                                  Options are disconnect on suspend and reconnect 
                                  after suspend. */
     SuspendOnConnectedStandby,  /**< This setting allows to control whether the VPN tunnel
                                      is suspended when the system enters the Connected Standby 
                                      mode. It applies only to Windows 8 and above. */
     UseStartBeforeLogon,    /**< This preference allows an administrator to 
                                  control the use of the Start Before Logon 
                                  feature. The preference can be set to true (on) 
                                  or false (off). */
     AutoUpdate,             /**< Once the Downloader has loaded the profile, it 
                                  can check the AutoUpdate preference to see if 
                                  updates are either disabled or enabled */
     RSASecurIDIntegration,  /**< This preference will enable the administrator 
                                  and possibly end user to select the preferred 
                                  method of managing their SDI PIN and PASSCODE 
                                  interactions. Options are Automatic (default), 
                                  SoftwareTokens and HardwareTokens. */
     WindowsLogonEnforcement,/**< This preference allows an administrator to
                                  control if more than one user may be logged into
                                  the client PC during the VPN connection (Windows
                                  only). */
     WindowsVPNEstablishment,/**< This preference allows an administrator to
                                  control whether or not remote users may initiate
                                  a VPN connection (Windows only). */
     LinuxLogonEnforcement,  /**< This preference allows an administrator to
                                  control if more than one user may be logged into
                                  the client PC during the VPN connection (Linux 
                                  only). */
     LinuxVPNEstablishment,  /**< This preference allows an administrator to
                                  control whether or not remote users may initiate
                                  a VPN connection (Linux only). */
     ProxySettings,          /**< This preference allows an administrator to
                                  control how user's proxy setups are handled.*/
     AllowLocalProxyConnections, /**< This preference allows the administrator to control
                                  whether to allow establishing a connection through
                                  a local proxy. */
     PPPExclusion,           /**< This preference allows an administrator to control
                                  the policy used to exclude routes to
                                  PPP servers when connecting over L2TP or PPTP.
                                  Options are Automatic (default), Disable,
                                  and Override. */
     PPPExclusionServerIP,   /**< When PPPExclusion is set to Manual,
                                  the value of this preference allows an
                                  end user to specify the address of a
                                  PPP server that should be excluded
                                  from tunnel traffic. */
     AutomaticVPNPolicy,     /**< This preference allows an administrator to 
                                  define a policy to automatically manage when a 
                                  VPN connection should be started or stopped. */
     TrustedNetworkPolicy,   /**< This preference allows an administrator to 
                                  define a policy for users in trusted networks.
                                  The options are: Disconnect or DoNothing. */
     UntrustedNetworkPolicy, /**< This preference allows an administrator to 
                                  define a policy for users in untrusted networks.
                                  The options are: Connect or DoNothing. */
         BypassConnectUponSessionTimeout, /**< This preference allows an administrator 
                                  the ability to instruct the client to bypass the 
                                  automatic connection retry after a VPN session timeout. */
     TrustedDNSDomains,      /**< This preference defines a list of comma 
                                  separated DNS suffixes that a network interface
                                  in a trusted network might have. */
     TrustedDNSServers,      /**< This preference defines a list of comma 
                                  separated DNS servers that a network interface
                                  in a trusted network might have. */
     TrustedHttpsServerList,  /**< This preference defines a list of comma separated
                                   https servers reachable only via a trusted network.*/
     DisableUntrustedInterfaces, /**< This preference disables interface without trusted
                                      server connectivity while in trusted network
                                      when there are multiple network interfaces. */
     AlwaysOn,               /**< This preference governs VPN reestablishment after
                                  interruptions */
     ConnectFailurePolicy,   /**< This preference gives the network administrator 
                                  the ability to dictate the network access allowed
                                  by the client endpoint device following a VPN
                                  connection establishment failure. It is a component
                                  of AlwaysOn */
     AllowCaptivePortalRemediation, /**< This preference gives the network administrator
                                     the ability to dictate the network access 
                                     allowed by the client endpoint device following
                                     a VPN connection establishment failure it is a
                                     component of AlwaysOn */
     CaptivePortalRemediationTimeout, /**< This preference allows the network administrator
                                      the ability to impose a time limit for captive portal 
                                      remediation when the ConnectFailurePolicy value is Closed
                                      It is a component of AlwaysOn */
     ApplyLastVPNLocalResourceRules, /**< This preference gives the network administrator 
                                        the ability to allow split routes and firewall rules 
                                        to be applied following a VPN connection establishment
                                        failure when the ConnectFailurePolicy value is Closed
                                        It is a component of AlwaysOn */
     AllowVPNDisconnect,     /**< During Always On, this specifies that the user is allowed to
                                  disconnect the VPN session. */
     SuppressConnectionRetries, /**< During Always On, this preference gives the network administrator
                                     the ability to suppress the VPN connection retry attempts */
     AllowedHosts,           /**< During Always On, user has access to the specified hosts
                                  when VPN is disconnected. */
     EnableScripting,        /**< This preference allows an administrator to 
                                  enable scripting (on connect or on
                                  disconnect). */
     TerminateScriptOnNextEvent,   /**< This preference dictates whether or not
                                        AnyConnect will terminate a running script
                                        process if a transition to another
                                        scriptable event occurs. */
     EnablePostSBLOnConnectScript, /**< This preference is used to control whether
                                        or not the OnConnect script will be launched
                                        from the desktop GUI when a tunnel has been
                                        established via SBL. */
     AutomaticCertSelection,   /**< This preference dictates whether or not to disable
                                    the default automatic certificate selection for user
                                    certificates. If disabled, a certificate selection dialog is
                                    displayed. This only applies if the GUI is enabled
                                    and not SBL. This only applies to Windows (not WinMobile). */
     RetainVpnOnLogoff,        /**< First control of the logoff behavior. This preference allows
                                    an administrator to control if the VPN is terminated or retained
                                    after user logs off.*/
     UserEnforcement,          /**< Second control of the logoff behavior. When the VPN connection has
                                    been retained after user logged off. Controls what user can log in 
                                    and keep the VPN connection. Options are same user only and any user. */
     DeviceLockRequired,           /**< This preference indicates whether or not 
                                        a Windows Mobile device must be configured
                                        with a password or PIN prior to establishing
                                        a VPN connection. This configuration is 
                                        only valid on Windows Mobile devices that
                                        use the Microsoft Default Local 
                                        Authentication Provider (LAP). */
     DeviceLockMaximumTimeoutMinutes,   /**< When set to a non-negative number, 
                                             this preference specifies the maximum
                                             number of minutes a device can be 
                                             inactive before device lock takes 
                                             into effect. (WM5/WM5AKU2+) */
     DeviceLockMinimumPasswordLength,   /**< When set to a non-negative number, 
                                             this preference specifies that any 
                                             PIN/password used for device lock 
                                             must be equal to or longer than
                                             the specified value, in characters.
                                             This setting must be pushed down to
                                             the mobile device by syncing with 
                                             an Exchange server before it can be 
                                             enforced. (WM5AKU2+) */
     DeviceLockPasswordComplexity,      /**< This preference checks whether or 
                                             not the password belongs to one of
                                             three subtypes: alpha, pin, strong */
     EnableAutomaticServerSelection,    /**< Automatic server selection will 
                                             automatically select the optimal 
                                             secure gateway for the endpoint */
     AutoServerSelectionImprovement,    /**< During a reconnection attempt after
                                             a system resume, this setting 
                                             specifies the minimum  estimated
                                             performance improvement required to
                                             justify transitioning a user to a new server 
                                             This value represents percentage in 0..100 */
     AutoServerSelectionSuspendTime,    /**< During a reconnection attempt after
                                             a system resume, this specifies the
                                             minimum time a user must have been 
                                             suspended in order to justify a new
                                             server selection calculation. Unit is hours */
     AuthenticationTimeout,             /**< Time, in seconds, that the client waits
                                             for authentication to be completed.*/
     SafeWordSofTokenIntegration,  /**< This preference will enable the administrator and possibly
                                        the end user to enable SafeWord SofToken integration.
                                        Options are Enabled (true) and Disabled (false - default). */
     AllowIPsecOverSSL,                      /**< if 'true' then tunneling of IPSEC over SSL
                                             is made possible with help from the ASA.
                                         */
     ClearSmartcardPin,                 /**< This preference controls whether the smartcard pin
                                             will be cleared on a successful connection*/
     IPProtocolSupport,                 /**< This preference controls which protocol(s) will be 
                                             allowed for the connection*/
     CaptivePortalRemediationBrowserFailover, /**< This preference is applicable to enhanced captive portal 
                                                   remediation and specifies whether the user is allowed to
                                                   opt for an external browser for remediation, as opposed to 
                                                   the AnyConnect browser. */
     AllowManualHostInput,              /**< This preference specifies whether the user
                                             is allowed to type a new hostname in the VPN
                                             edit box. */
     BlockUntrustedServers,             /**< This preference specifies whether the user wants
                                             to allow for connections to secure gateways with
                                             certificate errors. */
     PublicProxyServerAddress,          /**< This preference specifies the public proxy server
                                             address to be used. This number is in the format
                                             ServerAddr:ServerPort (ex. 101.89.85.444:8080)
                                             or just the FQDN. */
     CertificatePinning,                /**< This preference specifies whether Certificate Pinning
                                             check should be performed during server certificate
                                             verification. */
     UnknownPreference
 }; 

◆ PreferenceScope

enum PreferenceScope

Indicates the scope of the preferences contained in a PreferenceInfo object

Enumerator
User	Indicates that the preferences were set by a user
Global	Indicates that the preferences are global
UserAndGlobal	Indicates that we have both user and global preferences

 {
     User,               /**< Indicates that the preferences were set by a user */
     Global,             /**< Indicates that the preferences are global */
     UserAndGlobal       /**< Indicates that we have both user and global preferences */
 };

◆ PromptType

enum PromptType

Indicates the prompt or credential type.

Enumerator
Prompt_Input	label and value.
Prompt_Password	label and value, indicates user response should be masked.
Prompt_Banner	value (the banner) with no label set.
Prompt_Combo	list with choices options.
Prompt_Header	label intended as header and with value.
Prompt_Hidden	hidden value, should be ignored and left unchanged in response.
Prompt_CheckBox	label and value (contrained to true or false)
Prompt_SSO	single sign-on authentication token prompt

                 { Prompt_Input,     /**< label and value. */
                   Prompt_Password,  /**< label and value, indicates user
                                          response should be masked. */
                   Prompt_Banner,    /**< value (the banner) with no label set. */
                   Prompt_Combo,     /**< list with choices options. */
                   Prompt_Header,    /**< label intended as header and with
                                          value. */
                   Prompt_Hidden,    /**< hidden value, should be ignored and
                                          left unchanged in response. */
                   Prompt_CheckBox,  /**< label and value (contrained to true or false) */
                   Prompt_SSO        /**< single sign-on authentication token prompt */
 };

◆ SDITokenType

enum SDITokenType

Identifies the type of token that was used successfully when SDI Authentication is in use.

 { 
     SDITT_NONE, 
     SDITT_HARDWARE, 
     SDITT_SOFTWARE 
 };

◆ VPNError

enum VPNError

Indicates the last error seen by the API in this connection attempt.

Enumerator
VPNSuccess	No error has occurred.
VPNError_Generic_FatalError	An error of unknown type has occured
VPNError_Connection_Error	An unknown connection error has occured, such as bad hostname, bad group, etc.
VPNError_Connection_InvalidGroupURL	Invalid Group URL specified in the server address
VPNError_Network_Error	An unknown network error has occured, such as DNS resolution error, unable to open socket, routing error, captive portal, etc.
VPNError_Authentication_Error	An unknown user authenication error has occured.
VPNError_Authentication_DAP_Terminate	Access Denied: Your system does not meet policy requirements (DAP).
VPNError_ClientCertificate_UnknownError	An unknown client certificate error has occured.
VPNError_ClientCertificate_Missing	A client certificate is required but no client certificate has been found on the system.
VPNError_ClientCertificate_Expired	The client certificate has expired
VPNError_ClientCertificate_NotYetValid	The client certificate is not yet valid.
VPNError_ServerCertificate_UnknownError	An unknown error has occured when validating the server certificate.
VPNError_ServerCertificate_Expired	The server certificate has expired.
VPNError_ServerCertificate_NotYetValid	The server certificate is not yet valid.

 {
     VPNSuccess = 0,                      /**< No error has occurred. */
     VPNError_Generic_FatalError = 1,     /**< An error of unknown type has
                                               occured */
  
     VPNError_Connection_Error = 100,     /**< An unknown connection error has
                                               occured, such as bad hostname, bad
                                               group, etc. */
     VPNError_Connection_InvalidGroupURL, /**< Invalid Group URL specified in the 
                                               server address */
  
     VPNError_Network_Error = 200,        /**< An unknown network error has
                                               occured, such as DNS resolution
                                               error, unable to open socket,
                                               routing error, captive portal,
                                               etc. */
  
     VPNError_Authentication_Error = 300, /**< An unknown user authenication
                                               error has occured. */
  
     VPNError_Authentication_DAP_Terminate, /**< Access Denied: Your system does 
                                                 not meet policy requirements (DAP). */
  
     VPNError_ClientCertificate_UnknownError = 400, /**< An unknown client
                                                         certificate error has
                                                         occured. */
     VPNError_ClientCertificate_Missing,  /**< A client certificate is required
                                               but no client certificate has been
                                               found on the system. */
     VPNError_ClientCertificate_Expired,  /**< The client certificate has expired */
     VPNError_ClientCertificate_NotYetValid, /**< The client certificate is not
                                                  yet valid. */
  
     VPNError_ServerCertificate_UnknownError = 500, /**< An unknown error has
                                                         occured when validating
                                                         the server certificate. */
     VPNError_ServerCertificate_Expired,    /**< The server certificate has
                                                 expired. */
     VPNError_ServerCertificate_NotYetValid /**< The server certificate is not
                                                 yet valid. */
 };

◆ VPNState

enum VPNState

Provides the current state of the VPN tunnel.

Enumerator
CONNECTED	VPN is active
DISCONNECTED	VPN is inactive
CONNECTING	VPN is being established
DISCONNECTING	VPN is being terminated
RECONNECTING	VPN is being re-connected. This state can occur due to network or other temporary problems. The state indicates that the VPN is temporarily unavailable and indicates the connection is being re-established.
PAUSING	VPN is being paused.
PAUSED	VPN is paused.
SSOPOLLING	API is doing auth-poll, VPN is disconnected.

 {
     CONNECTED     = STATE_CONNECTED,        /**< VPN is active */
     DISCONNECTED  = STATE_DISCONNECTED,     /**< VPN is inactive */
     CONNECTING    = STATE_CONNECTING,       /**< VPN is being established */
     DISCONNECTING = STATE_DISCONNECTING,    /**< VPN is being terminated */
     RECONNECTING  = STATE_RECONNECTING,     /**< VPN is being re-connected.  This state 
                                                  can occur due to network or other
                                                  temporary problems.  The state
                                                  indicates that the VPN is temporarily
                                                  unavailable and indicates the
                                                  connection is being re-established. */
     PAUSING       = STATE_PAUSING,          /**< VPN is being paused. */
     PAUSED        = STATE_PAUSED,           /**< VPN is paused. */
     SSOPOLLING    = STATE_SSOPOLLING,       /**< API is doing auth-poll, VPN is disconnected. */
     UNKNOWN       = ~0
 };

◆ VPNSubState

enum VPNSubState

Provides the current sub-state of the VPN tunnel.

 {
     VPNSS_NORMAL                            = VCSS_NORMAL,
     VPNSS_INDEFINITE_DELAY                  = VCSS_INDEFINITE_DELAY,
     VPNSS_SESSION_EXPIRING                  = VCSS_SESSION_EXPIRING,
     VPNSS_MT_DISCONNECTED_DISABLED          = VCSS_MT_DISCONNECTED_DISABLED,
     VPNSS_MT_DISCONNECTED_TRUSTED_NW        = VCSS_MT_DISCONNECTED_TRUSTED_NW,
     VPNSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE= VCSS_MT_DISCONNECTED_USER_TUNNEL_ACTIVE,
     VPNSS_MT_DISCONNECTED_LAUNCH_FAILED     = VCSS_MT_DISCONNECTED_LAUNCH_FAILED,
     VPNSS_MT_DISCONNECTED_CONNECT_FAILED    = VCSS_MT_DISCONNECTED_CONNECT_FAILED,
     VPNSS_MT_DISCONNECTED_BAD_VPN_CONFIG    = VCSS_MT_DISCONNECTED_BAD_VPN_CONFIG,
     VPNSS_MT_DISCONNECTED_SW_UP_PENDING     = VCSS_MT_DISCONNECTED_SW_UP_PENDING,
     VPNSS_MTU_ADJUSTMENT_PENDING            = VCSS_MTU_ADJUSTMENT_PENDING
 };

◆ WMHint

enum WMHint

WMHint provides a hint for the GUI to either minimize or un-minimize.

Enumerator
MINIMIZE	hint to minimize GUI
OPEN	hint to un-minimize GUI
QUIT	hint that GUI should close. See also WMHintReason
REFRESHHOSTNAMES	hint to refresh the list of secure gateways
REFRESHPREFS	hint to refresh the preferences
SHOWCONNECTING	hint to display "connecting" status
CLOSECREDENTIALPOPUP	hint to close the credentials popup

 {
     MINIMIZE,       /**< hint to minimize GUI */
     OPEN,           /**< hint to un-minimize GUI */
     QUIT,           /**< hint that GUI should close.  @see WMHintReason */
     REFRESHHOSTNAMES,/**< hint to refresh the list of secure gateways */
     REFRESHPREFS,   /**< hint to refresh the preferences */
     SHOWCONNECTING,  /**< hint to display "connecting" status */
     CLOSECREDENTIALPOPUP, /**< hint to close the credentials popup */
 };

◆ WMHintReason

enum WMHintReason

WMHintReason provides a reason indicator for the WMHint

Enumerator
SECONDGUISTART	Indicates a second GUI has been launched. This indicator is used to suggest that the GUI already running be OPENed and that the first one should exit.
PROXYREQUEST	Proxy credential request can be for web-launch or standalone-initiated connections.
SERVICEFAILURE	This tag is used when the VPN service is no longer available.
DISCONNECT	Any disconnect notices should be seen by the user.
SERVICESTOPPED	This tag will be used in cases where the VPN service has been stopped.
CONNECT	Tag indicating an action to be taken due to connect, for example a request to minimize the UI.

 {
     SECONDGUISTART, /**< Indicates a second GUI has been launched.  This
                          indicator is used to suggest that the GUI
                          already running be OPENed and that the first one
                          should exit. */
     PROXYREQUEST,   /**< Proxy credential request can be for web-launch or
                          standalone-initiated connections. */
     SERVICEFAILURE, /**< This tag is used when the VPN service
                          is no longer available. */
     DISCONNECT,     /**< Any disconnect notices should be seen by the user. */
     SERVICESTOPPED, /**< This tag will be used in cases where the VPN service
                          has been stopped. */
     CONNECT,        /**< Tag indicating an action to be taken due to connect,
                          for example a request to minimize the UI. */
     REASONUNKNOWN   /**< */
 };

Macros

Enumerations