SCE1000->Trying to reboot by software... ÿ..050120313637414244454761626466675253010203 ## ##### ######## ## ## ## ## ## # ## ## ## ## # # ## ## ## ## ### ## ## ## #### #### ### ###### ###### ##### ## # ## ## ## # # ## # ## # ## # ######### #### ###### ## ## # ## # ## ## ###### # ## ## ## # ##### ## # ## ###### # ## #### ## ## # ## # #### ## ###### # ## #### ## ## # ## # ## # ## #### ## #### # # ### ## ## # ## # ## ### ###### #### #### ###### ###### ##### Copyright 2000 P-cube Ltd. CPU: 7457 BSP version: 2.1.0 Creation date: Jul 12 2004, 15:33:31 Press any key to stop auto-boot... 7 6 5 4 3 2 1 0 auto-booting... boot device : tffs,0 unit number : 0 processor number : 0 file name : /tffs0/system/p3hidden/SEos inet on ethernet (e) : 192.168.30.101:ffffff00 flags (f) : 0x0 target name (tn) : SCE1010 other (o) : gei0,baud=9600 tffs load 0 0 /tffs0/system/p3hidden/SEos Attaching to TFFS... ver: 2.6 FCS Disk Check In Progress ... total disk space (bytes) : 394,166,272 bytes in each allocation unit : 8,192 total allocation units on disk : 48,116 bad allocation units : 0 available bytes on disk : 224,313,344 available clusters on disk : 27,382 maximum available contiguous chain (bytes) : 219,095,040 available space fragmentation (%) : 3 clusters allocated : 20,734 Done Checking Disk. done. Loading /tffs0/system/p3hidden/SEos...27014528 + 12524698 Starting at 0x10000... 31323334353637616264912466667 device name gei0 Attached TCP/IP interface to gei unit 0 Attaching interface lo0...done Adding 63544 symbols for standalone. -> E1000-0 Link Change Down etext : 19d3580 edata: 2bf0954 : end: 2e1d544 etext : 19d4580 size : 6466176 Add to memory pool pointer 19d4580 size 6466176 bytes TIME_InitCommon(): Done. TIME_MiliSecPerSysTick=1, TIME_SysTickPerSec=1000. TIME_Init(): Done. E1000-0 Link Change Up Spawning Boot Time Watchdog ver: 2.6 FCS Disk Check In Progress ... total disk space (bytes) : 394,166,272 bytes in each allocation unit : 8,192 total allocation units on disk : 48,116 bad allocation units : 0 available bytes on disk : 224,313,344 available clusters on disk : 27,382 maximum available contiguous chain (bytes) : 219,095,040 available space fragmentation (%) : 3 clusters allocated : 20,734 Done Checking Disk. CardMain(): Beginning normal initialization... SeAppMain(): Initializing code root directory to '/tffs0/system/p3hidden', determined automatically. SeAppMain(): Initializing scos home directory to /tffs0Statring memeory initializations. SE1000 with extra memory detected (Rev G or better). Part_Init() - not enough memory. minSysHeap=125185920, Required = 381249536+minSysHeap=506435456, Free = 446124784. Available = 439678640. Memory will be adjusted Reduced memory requirement by 66756816 bytes. Part_Init(): Allocated 314492720 bytes for partitions memory, 131632056 bytes left in system heap (Largest block left is 125185816). Memory initialization [OK] Boot log file '/tffs0/system/bootlog.txt' drvNum=8. BootLog: Redirecting stdout and stderr to BootLog file (oldStdout=3). INFO: ScosMessagingManager::initScosMessagingManager(): Adding 23 definitions. initPatch: patchRemoteIp=0x0. INFO: Total inter-scos queues size to each scos process (by mproc ID): 4440064,557056,557056,557056, INFO: ScosMessagingManager::initScosMessagingManager(): Calling MprocCommon::initQueueDefinitions with 43 queues, hash=7310657. Calling Hw Init ... --------------------------------------------------------- Bsp Ver : 1.7 - build 3.0.1 VAS support --------------------------------------------------------- loading params file /tffs0/system/p3hidden/bsp/TxFpga.txt loading params file /tffs0/system/p3hidden/bsp/Metering.txt Loading hardware parameters HW Monitor Init...Done PS Monitor Init...Done Board type : 'G001' S/N : 'CAT09420FYN' P/N : '800-26618-02' loading from '/tffs0/system/p3hidden/G001/board.txt' 'fpga_file_name' = '"fpga3.txt"' 'tx_drv_name' = '"txDrv2"' 'rx_param' = '0x00000000' 'freq_bit' = '0x00000001' loading from '/tffs0/system/p3hidden/bsp/fpga3.txt' 'path' = '"/tffs0/system/p3hidden/fpga/"' 'tx_fn' = '"TX_G00.BIN"' 'cls_fn ' = '"CL_G00.BIN"' 'ff_fn' = '"FF_G00.BIN"' 'rx_fn' = '"RX_G00.BIN"' 'dp_fn' = '"DP_G00.BIN"' Board frequency : 62.50 Mhz board support new slow cam Start bypass wd NIC board type found 4GBE loading from '/tffs0/system/p3hidden/bsp/lic4gbe.txt' 'scan' = '0x00000000' 'debug_mode' = '0x00000000' 'path' = '"/tffs0/system/p3hidden/fpga/"' 'bin_file_name' = '"LI04GB.BIN"' 'fifo_wm' = '0x0000818c' 'xsvf_fname' = '"LI04GB.XSV"' 'drv_fname' = '"LI04GB.DRV"' 'param_fname' = '"LI04GB.PRM"' doing self test ..wait Start sync process Disable ip forwarding finish loading agents Initializing backplane net with anchor at 0x1ea00000... done. Backplane anchor at 0x1ea00000... done . Try to connect to share memory network interface 18.1.32.0 to sm0 .. success Each CPU has 16777216 bytes for input queues. CPU 0 has 11173312 unused bytes for input queues (Uses 33%). CPU 1 has 16219904 unused bytes for input queues (Uses 3%). CPU 2 has 16219872 unused bytes for input queues (Uses 3%). CPU 3 has 16219904 unused bytes for input queues (Uses 3%). All queues ready. agent's self test start ..wait RX :'/tffs0/system/p3hidden/fpga/RX_G00.BIN' CLS :'/tffs0/system/p3hidden/fpga/CL_G00.BIN' TX :'/tffs0/system/p3hidden/fpga/TX_G00.BIN' DP1 :'/tffs0/system/p3hidden/fpga/DP_G00.BIN' FF :'/tffs0/system/p3hidden/fpga/FF_G00.BIN' DP0 :'/tffs0/system/p3hidden/fpga/DP_G00.BIN' DP init DP0 SRAM BIST : OK DP1 SRAM BIST : OK RX init TX Init Loading tx driver 'txDrv2' CLS init .. PlatformSupportsExtendedTxBWCounters = 1 PlatformIsInVASMode = 0 FF init TX Init TX Init agent's self test2 start ..wait agent's self test2 pass VAS mode = 0 (SetFlowInfoMux to 0) L7FilterDrv::InitL7Filter() Create rhost: device configure split flow default configuration hw init finish OK ! Found 0 recvQueue for collector #0, 'nsm-to-sm-high'. Found 0 xmitQueue for dispatcher #0, 'nsm-to-sm-high'. Found 0 recvQueue for collector #1, 'sm-to-nms-high'. Found 0 xmitQueue for dispatcher #1, 'sm-to-nms-high'. Found 0 recvQueue for collector #2, 'nsm-to-sm-med'. Found 0 xmitQueue for dispatcher #2, 'nsm-to-sm-med'. Found 0 recvQueue for collector #3, 'sm-to-nms-med'. Found 0 xmitQueue for dispatcher #3, 'sm-to-nms-med'. Found 0 recvQueue for collector #4, 'nsm-to-sm-low'. Found 0 xmitQueue for dispatcher #4, 'nsm-to-sm-low'. Found 0 recvQueue for collector #5, 'sm-to-nms-low'. Found 0 xmitQueue for dispatcher #5, 'sm-to-nms-low'. Found 0 recvQueue for collector #6, 'nsm-to-sm-ulow'. Found 0 xmitQueue for dispatcher #6, 'nsm-to-sm-ulow'. Found 0 recvQueue for collector #7, 'sm-to-nms-ulow'. Found 0 xmitQueue for dispatcher #7, 'sm-to-nms-ulow'. SeAppMain(): About to call readConstDbFiles(), emergency=0 Reading platform DB (emergency=0)... Pre-setting 0 constDb variables (hard coded): Reading conf file 'DbConst.txt' from directory '/tffs0/system/p3hidden', sending to slaves... Checking for DB const file '/tffs0/system/p3hidden/DbConst.txt'... Found, reading it. Reading one DB const file '/tffs0/system/p3hidden/DbShape.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbFrmtr.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbParty.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbSched.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbJvm.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbCards.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbMem.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbClsCam.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbRpc.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbSanity.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbNrmFac.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbBox.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbExc.txt'... Reading one DB const file '/tffs0/system/p3hidden/DbEngage.txt'... Reading conf file 'DbConst.txt' from directory '/tffs0/system/p3hidden/G001', sending to slaves... Checking for DB const file '/tffs0/system/p3hidden/G001/DbConst.txt'... Found, reading it. Reading one DB const file '/tffs0/system/p3hidden/G001/DbM2Sys.txt'... Reading one DB const file '/tffs0/system/p3hidden/G001/DbParty.txt'... Reading one DB const file '/tffs0/system/p3hidden/G001/DbFrmtr.txt'... Reading one DB const file '/tffs0/system/p3hidden/G001/DbNrmFac.txt'... Reading one DB const file '/tffs0/system/p3hidden/G001/DbTunnel.txt'... Reading one DB const file '/tffs0/system/p3hidden/G001/DbMisc.txt'... Open user defined const db file /tffs0/system/usrconst.txt for read Config file '/tffs0/system/config.txt' found, extracting 'debug const-db' commands from it... Sending const-db END command to slaves... DbConstFileReader::readMainFile(): Sending end command 'END' to slaves after sending 67 vars, took 1626 sys ticks. processSeCommonConstDbInterfaceSpecificParams(): ifType=2, our data=1000000, no need to change queue params. 2062 DB variables initialized out of 2062. DBG 'common.CriticalSection.DBG_COULD_NOT_CREATE' hash= 4130614079. DBG 'common.CriticalSection.DBG_LIST_FULL' hash= 585703309. DBG 'common.CriticalSection.DBG_REMOVE_NOT_FOUND' hash= 3907609472. DBG 'common.DbBase.DBG_ADDING' hash= 3674379735. DBG 'common.DbBase.DBG_ADDING_OK' hash= 1198001663. DBG 'common.DbBase.DBG_NULL_PTR' hash= 1853563718. DBG 'common.DbBase.DBG_BAD_INDEX' hash= 1091176901. DBG 'common.DbBase.DBG_SET_CONST' hash= 2538370734. DBG 'common.DbBase.DBG_DUPLICATE_NAME' hash= 1287558230. DBG 'common.DbBase.DBG_NO_MEMORY' hash= 2546497118. DBG 'common.DbContainer.DBG_NO_MEMORY' hash= 1179297079. DBG 'common.test.msg2' hash= 2670446627. DBG 'common.test.msg3' hash= 3476223276. DBG 'common.test.msgA' hash= 89862758. Recorded 14 DBG messages, 0 hash collisions. Initializing heap consumers... Finished initialising heap consumers after 3 loops. Calling DBG_Init()... Debug queues are initialized Calling 43 DBG init functions... Registering SeCommon DBGs... Registering ControlCardHandlers DBGs... Registering CcAppVariableStorageManager DBGs... Registering CcPeriodicAggregatedRecords DBGs... Registering ControlCard DBGs... Message status cannot be set to "ALWAYS ON" Registering EDM DBGs... Registering ENGAGE_API DBGs... Registering EngageDb DBGs... Registering ENGAGE_INIT_STUFF DBGs... Registering ENGAGE_REPORT_AGG_LISTENER DBGs... Registering ENGAGE_REPOTING_DB DBGs... Registering ENGAGE_TUNABLES DBGs... Registering Common DBGs... Registering HandlerDeclaration DBGs... Registering AppModules DBGs... Registering IPv6_DB DBGs... Registering IPv6_Reporting DBGs... Registering LinecardHandlers DBGs... Registering LcTestApplicationLoader DBGs... Registering LineCard DBGs... Message status cannot be set to "ALWAYS ON" DBG_RTSetMsgPeriod: Message number 14 is larger then maximum -1 for module 0xc01 Registering LineCard2 DBGs... Registering ManagementVariables DBGs... Registering MCM DBGs... Registering NUR DBGs... Registering OSFingerPrintLC DBGs... Registering OSFingerPrint DBGs... Registering PartyDynamicStateManager DBGs... Registering PartyLogoutAging DBGs... Registering PARTY_PERIODIC_REPORTING DBGs... Registering PERIODIC_REPORTING DBGs... Registering QE DBGs... Registering RDR_RATE_CONTROL DBGs... Registering ReaderFileSystem DBGs... Registering REPORTING_API DBGs... Registering Reporting DBGs... Registering ReportAggregationManager DBGs... Registering REPORT_AGG_SUBTASK DBGs... Registering SUB_CONTEXT DBGs... Registering SUR DBGs... Registering TimeBasedHandlers DBGs... Registering VLUR_REPORT DBGs... Registering VSA DBGs... Registering VSA_RDR_LISTENER DBGs... DBG Rate control restored to normal state. Spawning tRTSchedular task... Conditional Delay task spawned - task name: tRTSchedular Setting the cascade ports definitions: 2 2 3 3 2 2 3 3 (crossed connected) File system 'ftp://' drvNum=10. File system 'ftpclient:' drvNum=11. File system 'hostftp:' drvNum=12. BootLog: Creature 'ControlCardInit' started. Spawning ControlMain task... **************************************************************************************** * * Starting boot process of Cisco SCE1000 Control Card - OS Version 4.1.0-classic Build 439. * **************************************************************************************** Not setting Control-Card affinity. BootLog: Creature 'LineCardInit' started. Beginning Version 4.1.0-classic Build 439, SCE1000 Version 4.1.0-classic Build 439. PartyDBManager::getMemorySize() called: numPIDs=203000, partyEfficiencyFactor=400, numIpEntries=200000, ipEfficiencyFactor=400, numRangeEntries=80000, radixEfficiencyFactor=200, maxVpnId=4096, numUnmappedRanges=5000, numUnmappedTunnels=0, Returning 23588312+35075744+826928=59490984. Spawning RucMain task... Not setting Master RUC affinity. Line card watchdog initialized Starting Memory Monitoring Task MsgHndlr: Registering RUC server interfaces... I'm a Master In RucEmergencies::initEmergencies Registering RuC RPC client interfaces... In RucEmergencies::initEmergencies - doorbell exist instantiating DoorbellMessenger In RucEmergencies::initEmergencies theEmergencyMessanger = 0x1dffb978 In RucEmergencyMessenger::createReceiverCommon DoorbellMessenger::createReceiverSpecific - called. Initializing traverser Watchdog, TWD Status = 1 (0=disabled, 1=enabled), LogOnly Status = 0, sampling interval(uSec)=1000 sampling timeout(miliSec)=5000 TraverserTimeQuotaGuard::Init() - finished successfully Ruc_Init(): VAS mode = 0 (SetFlowInfoMux to 0) Number Of Assembled ports 4, Number Of Supported ports 2 Port topology is set for Full port configuration - Single box Platform type is multi CPU CPU type is CPU_CONF_MASTER_ONLY Initializing RUC MPLS VPN support 3 agents detected, FF configured to 3 agents Init remote ip messages Ruc ques are initiliazed Ruc_Init(): Init VAS HW Ruc_Init(): PPC 0 initialized Flow-Capture Recording Rules manager successfully. Ruc_Init(): PPC 0 - no need to initializing Flow-Capture manager. BandwidthMeterTable Created. init hw counters manager INFO: Waiting for Complex RPC server to finish init... Spawning Reboot Support Task Reboot support task started Checking for duplicate DB variable names... CmdlGenIf: Tables are OK, 1566 funcs found. Host name from boot is ''. hiddenDir is '/tffs0/system/p3hidden'. systemDir is '/tffs0/system'. IP address is '192.168.30.101', subnet mask is '255.255.255.0'. Watchdog task spawned - task name: tCCWatchdog Boot Time Watchdog ended after 75 seconds Time updated according to RTC on master. Control ques are initiliazed Rpc client server already created Init only link and task Registering control internal RPC server interfaces... Done registering internal control RPC server interfaces. Registering control external RPC server interfaces... Done registering external control RPC server interfaces. LCH: Spawning qReader tasks... Not setting Formatter affinity. CooperativeSchedulerBase::runScheduler - Starting to run. Scheduler name is FormatterTaskScheduler Waiting for line card to respond to RPC requests... AttackFilterIntReal::initRpcClients(): Running. Finished waiting. Registering control RPC client interfaces... Done registering RuC RPC clients. Calling init functions that uses RPC... Done calling all init functions that uses RPC... INFO: Done waiting for Complex RPC server (4 sec) Scheduler component CommonSlaveSubtasksTable is not being registered Scheduler component SubtaskCdpProtocolTrPorts is not being registered URL Normalization global enabler initialized - default value is Disabled. Finished initializing RUC Scheduler Line card initialization complete. SANB_addTaskSwitchCallbackHook() installed hook. CooperativeSchedulerBase::runScheduler - Starting to run. Scheduler name is RucMain Remote output negotiation with cc successful. Remote fd is 16, max message size is 16 init Remote output device successfully. device name /rucRpc/. added entity to /rucRpc/ successfully. entity name: control . opened control remote output channel on fd 17 (redirected to fd 16 on control) Done registering control RPC clients. Waiting for line-card to finish initializing... Finished waiting. sending IP to LC : 0x-1062723995 -= Adding Ports =- Adding port FastEthernet0/0 Adding port FastEthernet0/1 Adding port GigabitEthernet0/1 Adding port GigabitEthernet0/2 Synchronizing the Line-Card Information LcManager(slot=0): CC port managers initialized LcManager(slot=0): Topology information retrieved from line card LcManager(slot=0): link and port information retrieved from line card LcManager(slot=0): Link mode information retrieved from line card LcManager(slot=0): num of supported external bypass devices 0 retrieved from line card LcManager(slot=0): info of all external bypass devices retrieved from line card Attached ControlCardIpFilter to gei traffic interface unit 0. Initializing Control-Card FTP client... Time updated according to RTC. VAS manager initated. Calling PartyDBManager::init()... PartyDBManager::init(): control party memory size is 59491072 bytes. PartyDBManager::init(): addrMemorySize=23588312, partyDbMemorySize=35075744, unmappedPartyDBMemorySize=826928. PartyDBManager::init(): wasted 88 bytes out of 59491072 bytes allocated to control party memory. PartyDBManager::init() OK. um-agent classpath file '/tffs0/system/p3hidden/um/classpth.txt' found. Read 142 bytes JVM classpath (um part): '/xcore.jar:/um_core.jar:/xjars.jar:/jdmk.jar:/antlr.jar:/xerces.jar:/regexp.jar:/log4j.jar:/asn1rt.jar:/xmlpapi.jar:/jce_bc.jar:/jmxri.jar:/ '. JVM classpath: '/tffs0/system/p3hidden/um/perclib.jar:/tffs0/system/p3hidden/um/perctool.jar:/tffs0/system/p3hidden/um/percstbs.jar:/tffs0/system/p3hidden/um/gcp.jar:/tffs0/system/p3hidden/um/xmlapis.jar:/tffs0/system/p3hidden/um/xrcsimpl.jar:/tffs0/system/p3hidden/um/xcore.jar:/tffs0/system/p3hidden/um/um_core.jar:/tffs0/system/p3hidden/um/xjars.jar:/tffs0/system/p3hidden/um/jdmk.jar:/tffs0/system/p3hidden/um/antlr.jar:/tffs0/system/p3hidden/um/xerces.jar:/tffs0/system/p3hidden/um/regexp.jar:/tffs0/system/p3hidden/um/log4j.jar:/tffs0/system/p3hidden/um/asn1rt.jar:/tffs0/system/p3hidden/um/xmlpapi.jar:/tffs0/system/p3hidden/um/jce_bc.jar:/tffs0/system/p3hidden/um/jmxri.jar:/tffs0/system/p3hidden/um/ '. Control to LineCard communication established starting watchdog dynamic stat sync with LineCard CLI initialization started Registered 144 out of 216 CLI trees, found 0 trees with problems. CLI initialization finished successfully Calling pre java confing, original file is /tffs0/system/config.txt, pre file name is /tffs0/system/p3hidden/config/prejava.txt Creating temp config pre-java file... Created pre-java config file with 15 lines. Executing /tffs0/system/p3hidden/config/prejava.txt: Beginning execution of temp pre-java configuration file. TimeStamp:86. clock timezone MSK 3 interface LineCard 0 interface FastEthernet 0/0 ip address 192.168.30.101 255.255.255.0 interface FastEthernet 0/1 ip address 192.168.30.101 255.255.255.0 interface GigabitEthernet 0/1 interface GigabitEthernet 0/2 exit line vty 0 4 exit interface Mng 0/1 exit interface Mng 0/2 exit Finished execution of temp pre-java configuration file. TimeStamp:87. Finished with 15 commands performed successfully and 0 had problems. Initializing JNI functions, no wrappers used. Launching the JVM... Not setting JVM affinity. Loading /tffs0/system/p3hidden/um/pvm.o ....JVM entry point func is pvm JVM print back trace func is printPVMBackTrace --------------------------------------------------- --- launch JVM -- --------------------------------------------------- javaString = -tz GMT+03:00 -no-preempt-boost -pri 160 -tpri 155 -nojit -regsize 1m -num-regions 45 -maxmem 45m -path /tffs0/system/p3hidden/um/ -cs 100000 -classpath /tffs0/system/p3hidden/um/perclib.jar:/tffs0/system/p3hidden/um/perctool.jar:/tffs0/system/p3hidden/um/percstbs.jar:/tffs0/system/p3hidden/um/gcp.jar:/tffs0/system/p3hidden/um/xmlapis.jar:/tffs0/system/p3hidden/um/xrcsimpl.jar:/tffs0/system/p3hidden/um/xcore.jar:/tffs0/system/p3hidden/um/um_core.jar:/tffs0/system/p3hidden/um/xjars.jar:/tffs0/system/p3hidden/um/jdmk.jar:/tffs0/system/p3hid.den/um/antlr.jar:/tffs0/system/p3hidden/um/xerces.jar:/tffs0/system/p3hidden/um/regexp.jar:/tffs0/system/p3hidden/um/log4j.jar:/tffs0/system/p3hidden/um/asn1rt.jar:/tffs0/system/p3hidden/um/xmlpapi.jar:/tffs0/system/p3hidden/um/jce_bc.jar:/tffs0/system/p3hidden/um/jmxri.jar:/tffs0/system/p3hidden/um/ -Dse.root=/tffs0/ -Dsce.data.root=/tffs0/ -Dsce.code.root=/tffs0/system/p3hidden -Dmng_agent.code.root=/tffs0/system/p3hidden/um -Dmng_agent.installs.root=/tffs0/system/p3hidden/um -Djava.security.manager -Djava.security.policy=/tffs0/system/p3hidden/um/config/security.pol StartSE .. *************** loading EM-AGENT=4.1.0 Build 123************* -- SE_ROOT_DIR=/tffs0/ -- java.library.path=/tffs0/system/p3hidden/um/ -- Identified VxWorks OS -- main start OS=WindRiver Systems VxWorks -- about to setup the logger. .- Cleaning obsolete files. - about to load MBeans -- starting network entity agent main -- finished initiating log4j, before parsing JDMK trace properties -- finished parsing JDMK trace properties, before checking whether do display -- before handling states directory -- about to startup agent -- starting to load MBeans -- after first debug message .-- constructed new network entity agent, about to load MBeans -- adding default MBeans -- loading Framework:name=Loader -- loading Framework:name=FileManager -- defaultPath /tffs0/system/p3hidden/um/ -- codePath /tffs0/system/p3hidden/um .-- loading Framework:name=AgentDelegate .-- loading Framework:name=UserManager -- adding MBean config entries -- loading Framework:name=Security -- loading Interfaces:name=HtmlAdaptorServer .-- loading Logger:name=Log4j -- loading SE:name=NativeFunctionality ....CALLING LIC WD FOR THE FIRST TIME AT TIME = 105991 Before HWSRV_NIC_Basic::SyncWithLic() SYNC WITH LIC DONE AT TIME = 106126 ..... Loading perc native.o .setupNotificationPolling() called: queue number=2. setupNotificationPolling() called: queue number=1. setupNotificationPolling() called: queue number=3. -- loading Utilities:name=NotificationListener -- loading SE:name=SEAbstraction -- loading Time:name=SystemTime -- loading Interfaces:name=FTPServer .-- loading SE:name=DatedTuneableChangerMBean -- loading SE:name=SmmAgent .-- loading Utilities:name=AdvertisingMBean -- loading Install:name=InstallExecutor -- loading Interfaces:name=RPC -- loading SE:name=Cli -- loading SMM:name=SSUMBean ..-- loading SE:name=PercMBean -- loading RDR:name=RDRServerMBean -- loading SMM:name=ExternalPull -- loading Framework:name=Statistics -- loading SMM:name=SCESubscriberApi .-- loading LEG:name=LeaseQueryLEG -- loading Engage:name=SEEngageMBean .-- calling postStart for default MBeans -- post start Framework:name=Loader -- post start Framework:name=FileManager -- post start Framework:name=AgentDelegate .-- post start Framework:name=UserManager -- post start Framework:name=Scheduler -- calling validate for all MBeans -- calling start for all(non-default) MBeans -- start Framework:name=Security -- start Interfaces:name=HtmlAdaptorServer -- start Logger:name=Log4j -- start SE:name=NativeFunctionality -- start Utilities:name=NotificationListener -- start SE:name=SEAbstraction -- start Time:name=SystemTime. -- start Interfaces:name=FTPServer -- start SE:name=DatedTuneableChangerMBean -- start SE:name=SmmAgent -- start Utilities:name=AdvertisingMBean -- start Install:name=InstallExecutor -- start Interfaces:name=RPC -- start SE:name=Cli -- start SMM:name=SSUMBean .-- start SE:name=PercMBean -- start RDR:name=RDRServerMBean -- start SMM:name=ExternalPull -- start Framework:name=Statistics -- start SMM:name=SCESubscriberApi -- start LEG:name=LeaseQueryLEG -- start Engage:name=SEEngageMBean -- calling postStart for all(non-default) MBeans -- post start Framework:name=Security -- post start Interfaces:name=HtmlAdaptorServer -- post start Logger:name=Log4j -- post start SE:name=NativeFunctionality -- post start Utilities:name=NotificationListener -- post start SE:name=SEAbstraction. -- post start Time:name=SystemTime -- post start Interfaces:name=FTPServer -- post start SE:name=DatedTuneableChangerMBean -- post start SE:name=SmmAgent -- post start Utilities:name=AdvertisingMBean -- post start Install:name=InstallExecutor -- post start Interfaces:name=RPC -- post start SE:name=Cli -- post start SMM:name=SSUMBean -- post start SE:name=PercMBean -- post start RDR:name=RDRServerMBean -- post start SMM:name=ExternalPull -- post start Framework:name=Statistics -- post start SMM:name=SCESubscriberApi -- post start LEG:name=LeaseQueryLEG -- post start Engage:name=SEEngageMBean -- calling post all register for all MBeans -- post-all-register Framework:name=Loader -- post-all-register Framework:name=FileManager .-- post-all-register Framework:name=AgentDelegate -- post-all-register Framework:name=UserManager -- post-all-register Framework:name=Scheduler -- post-all-register Framework:name=Security -- post-all-register Interfaces:name=HtmlAdaptorServer -- post-all-register Logger:name=Log4j -- post-all-register SE:name=NativeFunctionality -- post-all-register Utilities:name=NotificationListener -- post-all-register SE:name=SEAbstraction -- post-all-register Time:name=SystemTime -- post-all-register Interfaces:name=FTPServer -- post-all-register SE:name=DatedTuneableChangerMBean -- post-all-register SE:name=SmmAgent .-- post-all-register Utilities:name=AdvertisingMBean -- post-all-register Install:name=InstallExecutor -- post-all-register Interfaces:name=RPC. -- post-all-register SE:name=Cli ..-- post-all-register SMM:name=SSUMBean -- post-all-register SE:name=PercMBean -- post-all-register RDR:name=RDRServerMBean -- post-all-register SMM:name=ExternalPull -- post-all-register Framework:name=Statistics -- post-all-register SMM:name=SCESubscriberApi -- post-all-register LEG:name=LeaseQueryLEG. -- post-all-register Engage:name=SEEngageMBean -- calling apply for all MBeans -- calling post-all-apply for all MBeans -- calling general config validation -- about to leave startup mbeans procedure -- all mbeans are loaded. -- mbeans configuration is loaded -- startup agent complete -- console shutdown is disabled . JVM launched OK. Executing configuration files, boot log stored in '/tffs0/system/bootlog.txt'. Executing /tffs0/system/config.txt: Beginning execution of general configuration file. TimeStamp:130. Please note: text is not logged into the bootlog file, and not output to shell, due to space and time considerations. Finished execution of general configuration file. TimeStamp:132. Finished with 49 commands performed successfully and 0 had problems. No Protected general config files found. Loading party database from backup. TimeStamp:132. Done loading party and mappings database. TimeStamp:134. Executing /tffs0/system/p3hidden/config/applcfg.txt: Beginning execution of application configuration file. TimeStamp:135. Please note: text is not logged into the bootlog file, and not output to shell, due to space and time considerations. Finished execution of application configuration file. TimeStamp:259. Finished with 28278 commands performed successfully and 0 had problems. No Protected application config files found. Loading party tunables database from backup. TimeStamp:260. Done loading party tunables database. TimeStamp:260. Activating Generic SCOS RPC server. TimeStamp:261. Activating telnet server. TimeStamp:262. Telnet Server started on port 23. Telnet Server started OK. Activating SSH server. TimeStamp:262. SshSessionManager::init(5,disabled) SSH_init successful Service guard init Activating SNMP server. TimeStamp:262. Activating CLI Console. TimeStamp:262. Serial CLI console started on device '/tyCo/1'. BootLog: Creature 'ControlCardInit' finished. BootLog: Boot process finished, stopping redirection of stdout and stderr to BootLog file. Finished boot. TimeStamp:263. ***************************************************************** * * Welcome to SCE1000 Version 4.1.0-classic Build 439. * *****************************************************************