U-Boot 1.1.4 (May 13 2009 - 10:07:12) Freescale PowerPC CPU: Core: E600, Version: 0.2, (0x80040202) System: 8641D, Version: 2.1, (0x80900121) Clocks: CPU:1000 MHz, MPX: 400 MHz, DDR: 200 MHz, LBC: 25 MHz L2: Enabled Board: Simba (Board HW versions:99) PORICR (F80E0020) : 53000C47 PORBMSR (F80E0004) : 8E360001 PORDEVSR (F80E000C) : 02AF8347 PORPLLSR (F80E0000) : 00190008 PORIMPCR (F80E0008) : 0000007F PORDBGMSR (F80E0010) : 0E000000 CPU(local):0(0) Master(local):1(1) Tavor:1 Cofico:0 Cofico number:0 Standalone:0 U-Boot version info [FFF00000]: [uboot] ver = 2.1.0 build = 1 date = Wed May 13 10:07:13 IDT 2009 cwd = /auto/srg-sce-swinfra-usr/emb/users/gahazan/work/Emb/GPL/uboot-1.1.4-fsl/dev user = gahazan@csi-pqemb-b05 Bus I2C: init ... clear ... ready DRAM: DIMM1: 1x1024@200MHz Manf.ID: [ 7F 94 00 00 00 00 00 00 ] Manf.P/N: SG572288FG8RWILME3 DIMM1: At 00000000, 1024MB, Method:1, ECC init ... filling .... done DIMM2: 1x1024@200MHz Manf.ID: [ 7F 94 00 00 00 00 00 00 ] Manf.P/N: SG572288FG8RWILME3 DIMM2: At 40000000, 1024MB, Method:1, ECC init ... filling .... done Micro DRAM test 1: write ... read ... done Micro DRAM test 2: write ... read ... done DDR: 2048 MB Now running in RAM - U-Boot at: 0FFB7000. Relocation offset:EFF4B000 Initializing 8641 LBC LBCR:00000000 LCRR:80030004 LBC clock:50MHz CPLD status: ID (F9000000) : A1BB RST_SRC (F9000082) : 0001 INT_STAT (F9000006) : 0000 SMC CPLD status: ID (F9200000) : 8274 PRESENT (F9200010) : C100 PWR_STAT (F9200012) : 01AE LOCATION (F9200046) : 0009 RST_CAUSE (F9200052) : 0002 PWR_INT (F9200056) : 0020 Reset board devices (0608) FLASH: 64 MB Using default environment In: serial Out: serial Err: serial Net: eTSEC2: PHY is Marvell 88E1111S-Simba-direct (53410cc2) eTSEC3: PHY is Marvell 88E1111S-Simba-remote (d3410cc2) eTSEC4: PHY is Marvell 88E1111S-Simba-remote (d3410cc2) eTSEC2, eTSEC3 [PRIME], eTSEC4 Hit any key to stop autoboot: 0 Importing basicdata to env ## Executing script at ffe80100 ubootscript: CF 0 Cofico power Cofico 0: installed, power OK, armed Cofico 1: installed, power OK, armed GEN_CONT1 (F920000A) : 0030 INFO: bootloc set to 0 INFO: kernel address set to ff600100 from kernel0. [kernel] ver = 2.4.0 build = 4 date = Tue Jan 6 18:50:45 IST 2015 cwd = /ws/nmurugad-bgl/Work/neworkspace/Emb/GPL/kernel-2.6.17-fsl/dev user = nmurugad@bgl-sce-005 INFO: root device set to /dev/hda1 from rootdevcf0. ## Booting image at ff600100 ... Image Name: Linux-2.6.26.2 Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 1777637 Bytes = 1.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Using Simba machine description Total memory = 2048MB; using 4096kB for hash table (at cfc00000) Linux version 2.6.26.2 (nmurugad@bgl-sce-005) (gcc version 4.2.0 (MontaVista 4.2.0-16.0.36.0802211 2008-10-04)) #4 SMP Tue Jan 6 14:47:02 IST 2015 simba_machine_early_init: start HW ID word:53000C47 simba_machine_early_init: Allocated 32MB at EC000000 for PCI memory buffer simba_machine_early_init: Allocated 4MB at EF800000 for slave boot buffer simba_machine_early_init: Allocated 6144KB at EF200000 for TSEC user buffer scos_allocate_master_pci_memory: master pci memory: size:32768K free:9060K simba_machine_early_init: end CPU maps initialized for 1 thread per core console [udbg0] enabled setup_arch: bootmem simba_setup_arch() INFO: simba_machine_setup_arch - start INFO: scos_flash_log_init_early: Flash log 'flash-log' initialized (early). area:1 fl_start:3E60000 fl_last:3E7FFFF console handover: boot [udbg0] -> real [flashlog0] simba_setup_arch() - end arch: exit Using Simba machine description Total memory = 2048MB; using 4096kB for hash table (at cfc00000) Linux version 2.6.26.2 (nmurugad@bgl-sce-005) (gcc version 4.2.0 (MontaVista 4.2.0-16.0.36.0802211 2008-10-04)) #4 SMP Tue Jan 6 14:47:02 IST 2015 simba_machine_early_init: start HW ID word:53000C47 simba_machine_early_init: Allocated 32MB at EC000000 for PCI memory buffer simba_machine_early_init: Allocated 4MB at EF800000 for slave boot buffer simba_machine_early_init: Allocated 6144KB at EF200000 for TSEC user buffer scos_allocate_master_pci_memory: master pci memory: size:32768K free:9060K simba_machine_early_init: end CPU maps initialized for 1 thread per core console [udbg0] enabled INFO: simba_machine_setup_arch - start INFO: scos_flash_log_init_early: Flash log 'flash-log' initialized (early). area:1 fl_start:3E60000 fl_last:3E7FFFF console handover: boot [udbg0] -> real [flashlog0] console [scos-ser-1] enabled Initializing 8641 INFO: slot: 1 is_super_master: 1 TVR CPLD: ID [0000]: A1BB RST_SRC [0082]: 0001 SMC CPLD: ID [0000]: 8274 PRESENT [0010]: C100 PWR_STAT [0012]: 01AE RST_CAUSE [0052]: 0002 I2C early init WARNING : ' Atmel for fsl i2c bus was created ' WARNING : ' Atmel for fsl i2c bus was created ' Valid MAC 00:23:04:87:5e:a0 (4) Initializing fan tray Initializing GPIO-0 to DFFF Initializing GPIO-0 to DFFF simba_machine_setup_arch: Reset Cofico boards simba_setup_arch_pcie: start simba_setup_arch_pcie: end INFO: simba_machine_setup_arch - end Zone PFN ranges: DMA 0 -> 196608 Normal 196608 -> 196608 HighMem 196608 -> 524288 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 524288 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520192 Kernel command line: root=/dev/hda1 systemid=:simba:0:ff600100:0 sysflags= console=ttyS0,9600 mpic: Setting up MPIC " MPIC " version 1.2 at f8040000, max 2 CPUs mpic: ISU size: 16, shift: 4, mask: f mpic: Initializing for 80 sources PID hash table entries: 4096 (order: 12, 16384 bytes) clocksource: timebase mult[2800000] shift[22] registered Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2027372k/2097152k available (3488k kernel code, 68688k reserved, 212k data, 188k bss, 204k init) Mount-cache hash table entries: 512 mpic: requesting IPIs ... Processor 1 found. Synchronizing timebase Got ack score 299, offset 1000 score 299, offset 500 score 299, offset 250 score 299, offset 125 score 299, offset 62 score 243, offset 31 score -299, offset 15 score -107, offset 23 score -173, offset 27 score 295, offset 29 score -201, offset 28 Min 28 (score -129), Max 29 (score 297) Final offset: 28 (259/300) Brought up 2 CPUs net_namespace: 488 bytes NET: Registered protocol family 16 SKL: Creating sys - System wide SKL with 262144 bytes buffer SKL: Creating tmp - Temporary SKL with 65536 bytes buffer gfar(0) MAC 00:23:04:87:5e:a0 taken from smc-eeprom gfar(1) MAC 00:14:a8:ff:48:05 self mac slot 1 gfar(2) MAC 00:23:04:87:5e:a2 taken from smc-eeprom gfar(3) MAC 00:23:04:87:5e:a3 taken from smc-eeprom Registering Simba devices simba_pci_arch_initcall: start SKL: Creating pci - Simba PCI with 262144 bytes buffer simba_pcie_setup_single_bridge: init PCI bridge 10:00.0 - pri_bus:10 sec_bus:18 sub_bus:3F memory:C0000000-DFFFFFFF simba_pcie_setup_single_bridge: init PCI bridge 18:00.0 - pri_bus:18 sec_bus:19 sub_bus:3F memory:C4000000-DFFFFFFF simba_pcie_setup_single_plx_bars: init PCI bridge 18:00.0 BAR at C0000000 simba_pcie_setup_single_bridge: init PCI bridge 19:04.0 - pri_bus:19 sec_bus:21 sub_bus:21 memory:C4000000-C7FFFFFF simba_pcie_setup_single_bridge: init PCI bridge 19:03.0 - pri_bus:19 sec_bus:22 sub_bus:22 memory:C8000000-CBFFFFFF simba_pcie_setup_single_bridge: init PCI bridge 19:02.0 - pri_bus:19 sec_bus:23 sub_bus:23 memory:CC000000-CFFFFFFF simba_pcie_setup_single_bridge: init PCI bridge 19:01.0 - pri_bus:19 sec_bus:28 sub_bus:3F memory:D0000000-DFFFFFFF simba_pcie_setup_single_bridge: init PCI bridge 28:00.0 - pri_bus:28 sec_bus:29 sub_bus:3F memory:D4000000-DFFFFFFF simba_pcie_setup_single_plx_bars: init PCI bridge 28:00.0 BAR at D0000000 simba_pcie_setup_single_bridge: init PCI bridge 29:04.0 - pri_bus:29 sec_bus:34 sub_bus:34 memory:D4000000-D7FFFFFF simba_pcie_setup_single_bridge: init PCI bridge 29:03.0 - pri_bus:29 sec_bus:35 sub_bus:35 memory:D8000000-DBFFFFFF simba_pcie_setup_single_bridge: init PCI bridge 29:02.0 - pri_bus:29 sec_bus:36 sub_bus:36 memory:DC000000-DFFFFFFF simba_pci_arch_initcall: end PCI: Probing PCI hardware PCI: 0000:10:00.0: class b20 doesn't match header type 01. Ignoring class. pci 0000:10:00.0: enabling device (0146 -> 0147) NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered NET: Registered protocol family 1 highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 1401 io scheduler noop registered io scheduler deadline registered (default) Generic RTC Driver v1.07 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled serial8250.0: ttyS0 at MMIO 0xf8004500 (irq = 42) is a 16550A console [ttyS0] enabled serial8250.0: ttyS1 at MMIO 0xf8004600 (irq = 28) is a 16550A brd: module loaded loop: module loaded Gianfar MII Bus: probed eth0: Gianfar Ethernet Controller Version 1.2, 00:14:a8:ff:48:05 eth0: Running with NAPI enabled eth0: 256/256 RX/TX BD ring size eth1: Gianfar Ethernet Controller Version 1.2, 00:23:04:87:5e:a2 eth1: Running with NAPI enabled eth1: 256/256 RX/TX BD ring size eth2: Gianfar Ethernet Controller Version 1.2, 00:23:04:87:5e:a3 eth2: Running with NAPI enabled eth2: 256/256 RX/TX BD ring size Uniform Multi-Platform E-IDE driver ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports i2c /dev entries driver SKL: Creating i2c_mpc_skl - MPC I2C driver with 65536 bytes buffer SKL I2C MPC creation ok I2C_MPC:0 (mpc_restart_device:253) :restart device - send 16 clock Identify ds1337 RTC device create I2C 0 I2C_MPC:0 (mpc_restart_device:253) :restart device - send 16 clock create I2C 1 scos_skynet: SCOS skynet driver creates internal network over shared memory - v0.01 (Dec 15 2014 16:25:31) SKL: Creating log - SCOS skynet internal network driver with 131072 bytes buffer scos_mem_drv: SCOS memory driver - provides access to memory block - v0.01 (Dec 15 2014 16:25:33) SKL: Creating memdrv - SCOS memory access driver with 65536 bytes buffer gaccess: SCOS generic access driver - provides low access to memory, PCI & Eth phy - v0.02 (Dec 15 2014 16:25:30) SKL: Creating gaccess - Generic access driver with 65536 bytes buffer scos_virtual_phy: SCOS virtual PHY driver - v0.01 (Dec 15 2014 16:25:33) scos-virtual_mdio_bus: probed scos_serial_buf_proc_create: Registering serial buf procs scos_plx8508_pci_probe: 0000:18:00.0 - probing for PLX8508 scos_plx8508_pci_probe_proc_data_mem_regs: 0000:18:00.0 - PLX8508 proc data added successfully at c0000000 INFO: scos_reg_mon_early_init: Reg monitor hw-mon-regs early init done scos_plx8508_pci_probe: 0000:19:01.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:19:02.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:19:03.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:19:04.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:28:00.0 - probing for PLX8508 scos_plx8508_pci_probe_proc_data_mem_regs: 0000:28:00.0 - PLX8508 proc data added successfully at d0000000 scos_plx8508_pci_probe: 0000:29:00.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:29:02.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:29:03.0 - probing for PLX8508 scos_plx8508_pci_probe: 0000:29:04.0 - probing for PLX8508 scos_core_info: SCOS core info procfs - v0.01 (Dec 15 2014 16:25:36) INFO: scos_dump_init: SCOS dump init simba_mtd_init: chip probing with cfi_probe bootflash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 bootflash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. simba_mtd_init: name:bootflash, size:65536K Creating 14 MTD partitions on "bootflash": 0x03f00000-0x03f80000 : "uboot0" 0x03f80000-0x04000000 : "uboot1" 0x03ec0000-0x03ee0000 : "uboot-env0" 0x03ee0000-0x03f00000 : "uboot-env1" 0x03e80000-0x03ea0000 : "select0" 0x03ea0000-0x03ec0000 : "select1" 0x03e40000-0x03e60000 : "log0" 0x03e60000-0x03e80000 : "log1" 0x03e00000-0x03e20000 : "obfl0" 0x03e20000-0x03e40000 : "obfl1" 0x03600000-0x03a00000 : "kernel0" 0x03a00000-0x03e00000 : "kernel1" 0x02000000-0x03600000 : "maint" 0x00000000-0x02000000 : "spare0" INFO: simba_dump_initcall: Simba dump init scos simba i2c drivers init I2C probe tavor-mux i2c_bus: 0 mux_addr: 112 Identify ds1337 RTC device init mux i2c buses bus 0 I2C_MPC:0 (mpc_restart_device:253) :restart device - send 16 clock bus 1 I2C_MPC:0 (mpc_restart_device:253) :restart device - send 16 clock Cofico I2C bus create dev: 0 adapter : 2 Cofico I2C bus create dev: 1 adapter : 2 simba_pcie_8641_pci_probe: 0000:10:00.0 - probing for 8641 simba_pcie_8641_pci_probe: 0000:36:00.0 - probing for 8641 simba_devices_reg_remote:Registering plaform devices for remote CPU 06 at DC000000 simba_pcie_8641_pci_probe: 0000:35:00.0 - probing for 8641 simba_devices_reg_remote:Registering plaform devices for remote CPU 05 at D8000000 simba_pcie_8641_pci_probe: 0000:34:00.0 - probing for 8641 simba_devices_reg_remote:Registering plaform devices for remote CPU 04 at D4000000 simba_pcie_8641_pci_probe: 0000:23:00.0 - probing for 8641 simba_devices_reg_remote:Registering plaform devices for remote CPU 03 at CC000000 simba_pcie_8641_pci_probe: 0000:22:00.0 - probing for 8641 simba_devices_reg_remote:Registering plaform devices for remote CPU 02 at C8000000 simba_pcie_8641_pci_probe: 0000:21:00.0 - probing for 8641 scos_allocate_slave_pci_memory: slave pci memory: size:32768K free:30720K simba_devices_reg_remote:Registering plaform devices for remote CPU 01 at C4000000 simba_mdio_i2c_bus: Simba MDIO over I2C bus driver - v0.01 (Dec 15 2014 16:25:48) SKL: Creating mdio_i2c_bus - Simba MDIO I2C bus driver with 65536 bytes buffer simba-mdio_i2c: probed simba_phy_88e1111: Simba Marvell 88E1111 PHY driver - v1.0 (Dec 15 2014 16:25:49) simba_phy_e1111_probe: Probing PHY 2:01 SKL: Creating phy-2:01 - Simba 88E1111 PHY driver with 65536 bytes buffer simba_phy_e1111_probe: Probing PHY 2:02 SKL: Creating phy-2:02 - Simba 88E1111 PHY driver with 65536 bytes buffer simba_phy_e1111_probe: Probing PHY 2:03 SKL: Creating phy-2:03 - Simba 88E1111 PHY driver with 65536 bytes buffer INFO: simba_wdog_init: Init INFO:scos_wdog_kernel_init: 'wdog-kernel' HW status: enabled:1 time left[mSec]:573120 =~9m IDE phys mem cs0: f9700000...f9701000 (size 00001000) IDE phys mem cs1: f9708000...f9709000 (size 00001000) hda: SILICONSYSTEMS INC 4GB-3213, ATA DISK drive ide0 at 0xf11f6000-0xf11f600e,0xf11f800c on irq 73 hda: max request size: 128KiB hda: 8251488 sectors (4224 MB) w/0KiB Cache, CHS=8186/16/63 hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 > scos_cofico_debug: SCOS cofico debug - v0.01 (Dec 15 2014 16:25:51) Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team ClusterIP Version 0.8 loaded successfully arp_tables: (C) 2002 David S. Miller TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. INFO: simba_pcie_e2e_crc_run_fixups: enable PCI E2E CRC VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 204k init INIT: version 2.86 booting ##### /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/inittab/earlyinit.inittab --start: START INFO: earlyinit.inittab: RUNLEVEL=S mount -n -t proc none /proc kernel cmdline: root=/dev/hda1 systemid=:simba:0:ff600100:0 sysflags= console=ttyS0,9600 platform: simba distro:ppc_74xx-mvl Running 'S' early-init scripts from various locations earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S02set_base_params.sh SYS_KCMDLINE_FILE=/proc/cmdline SYS_PLATFORM=simba SYS_DISTRO=ppc_74xx-mvl SYS_CPU=0 SYS_MAX_CPU_COUNT=7 SYS_SLOT=1 /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S02set_base_params.sh: line 54: printf: `%02': missing format character SYS_GCPU=1 SYS_MAX_SLOT=2 SYS_IS_MASTER=1 SYS_IS_SUPER_MASTER=1 SYS_BOOT_KERNEL_ADDR=ff600100 SYS_BOOT_ACTIVE_LOC=0 SYS_BOOT_INACTIVE_LOC=1 SYS_ETH_IF1=eth1 SYS_ETH_IF2=eth2 SYS_ETH_IF1B=eth1:1 SYS_ETH_IF2B=eth2:1 SYS_ETH_IF_INTERNAL=skynet0 SYS_ETH_IF_INTER_SLOT=eth0 SYS_LINUX_CONSOLE=/dev/ttyS0 SYS_APP_CONSOLE=/dev/ttyS1 earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S04get_kcmdline_sysflags.sh INFO: Getting system flags from kernel command line earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S06set_cf_params.sh SYS_BOOT_ACTIVE_LOC=0 Detected boot from hda1 SYS_PKG_RFS_PRIMARY_DEV: /dev/hda1 SYS_PKG_RFS_PRIMARY_MNT: /cf/rfs0 SYS_PKG_RFS_SECONDARY_DEV: /dev/hda2 SYS_PKG_RFS_SECONDARY_MNT: /cf/rfs1 SYS_PKG_RFS_MNT_OPT: -t ext2 -o noatime,errors=panic earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S08set_nfs_params.sh earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S09hw_clock HW clock is set to: Sat Feb 3 04:33:51 2007 -0.254795 seconds HW clock year is 2007 /sbin/hwclock --hctosys --utc Date after setting the clock: Sat Feb 3 04:33:53 UTC 2007 earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S10mount_dev INFO: remouting /dev with tmpfs mount -n -t tmpfs none /dev.mnt cp -ar /dev/. /dev.mnt mountkjournald starting. Commit interval 5 seconds -n --bind /dev.EXT3 FS on hda3, internal journal mnt /dev earlyiEXT3-fs: mounted filesystem with ordered data mode. nit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/Skjournald starting. Commit interval 5 seconds 11prepare_apps_tdata mount -n -EXT3 FS on hda5, t tmpfs none /apinternal journal ps/tdata earlyiEXT3-fs: mounted filesystem with ordered data mode. nit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S13mount_nfs INFO: no NFS base, no (debug) NFS mounts earlyinit.inittab: executing /rfs/packages/platform-core-kjournald starting. Commit interval 5 seconds rfs/ppc_74xx-mvlEXT3 FS on hda7, internal journal -simba/cur/rc.d/EXT3-fs: mounted filesystem with ordered data mode. earlyinit.d/S14mount_cf fsck.ext3 -p -t -t /dev/hda3 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda3 is mounted. /dev/hda3: clean, 1468/146592 files, 112809/293076 blocks (check in 5 mounts) fsck.ext3 exit status is 0 INFO: fsck.ext3 /dev/hda3 (Which is /cf/const) passed with shining colors mount -n -o noatime,data=ordered,errors=panic -t ext3 /dev/hda3 /cf/const fsck.ext3 -p -t -t /dev/hda5 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda5 is mounted. /dev/hda5: clean, 246/171072 files, 75855/341956 blocks fsck.ext3 exit status is 0 INFO: fsck.ext3 /dev/hda5 (Which is /cf/data) passed with shining colors mount -n -o noatime,data=ordered,errors=panic -t ext3 /dev/hda5 /cf/data INFO: clean_if_needed called, dir=data, mount_point=/cf/data, format_cmd=mkfs.ext3 -O^resize_inode,^dir_index -b 4096 /dev/hda5, mount_cmd=mount -n -o noatime,data=ordered,errors=panic -t ext3 /dev/hda5 /cf/data, using_ext3=1, must_format=0, dir_to_save= INFO: /cf/data/data-ok.cf exists, not cleaning /cf/data fsck.ext2 -p -t -t /dev/hda6 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda6 is mounted. /dev/hda6: clean, 883/97920 files, 52596/391104 blocks fsck.ext2 exit status is 0 INFO: fsck.ext2 /dev/hda6 (Which is /cf/var) passed with shining colors mount -n -o noatime,errors=panic -t ext2 /dev/hda6 /cf/var INFO: clean_if_needed called, dir=var, mount_point=/cf/var, format_cmd=mkfs.ext2 -O^resize_inode,^dir_index -b 1024 /dev/hda6, mount_cmd=mount -n -o noatime,errors=panic -t ext2 /dev/hda6 /cf/var, using_ext3=0, must_format=0, dir_to_save= INFO: /cf/var/var-ok.cf exists, not cleaning /cf/var fdisk -s /dev/hda7 196056 fsck.ext3 -p -t -t /dev/hda7 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda7 is mounted. /dev/hda7: clean, 2179/49152 files, 15110/196056 blocks fsck.ext3 exit status is 0 INFO: fsck.ext3 /dev/hda7 (Which is /cf/cdata) passed with shining colors mount -n -o noatime,data=ordered,errors=panic -t ext3 /dev/hda7 /cf/cdata INFO: clean_if_needed called, dir=cdata, mount_point=/cf/cdata, format_cmd=mkfs.ext3 -O^resize_inode,^dir_index -b 1024 /dev/hda7, mount_cmd=mount -n -o noatime,data=ordered,errors=panic -t ext3 /dev/hda7 /cf/cdata, using_ext3=1, must_format=0, dir_to_save= INFO: /cf/cdata/cdata-ok.cf exists, not cleaning /cf/cdata earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S16nfs_bind_site earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S18update_apps_bin INFO: S18update_apps_bin: Mouting tmpfs for /apps/bin mount -n -t tmpfs none /apps/bin earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S19set_syspath.sh SYS_PATH=/apps/bin PATH=/apps/bin:/bin:/usr/bin:/sbin:/usr/sbin earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S22nfs_prepare_apps_dirs earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S25cf_prepare_apps_dirs INFO: const dir /cf/const is valid INFO: /apps/const is at /cf/const mount -n --bind /cf/const /apps/const INFO: data dir /cf/data is valid INFO: /apps/data is at /cf/data mount -n --bind /cf/data /apps/data INFO: var dir /cf/var is valid INFO: /apps/var is at /cf/var mount -n --bind /cf/var /apps/var fdisk -s /dev/hda7 196056 INFO: cdata dir /cf/cdata is valid INFO: /apps/cdata is at /cf/cdata mount -n --bind /cf/cdata /apps/cdata earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S28tmpfs_prepare_apps_dirs earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S35init_template INFO: template OK - /apps/const/pkg INFO: template OK - /apps/data/tmp INFO: template OK - /apps/var/rfs INFO: recreating /apps/var/rfs INFO: refreshing /apps/var with template from /rfs/packages/template-var/ppc_74xx-mvl-simba/cur for rfs rm -rf /apps/var/cpu.0/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.0 rm -rf /apps/var/cpu.1/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.1 rm -rf /apps/var/cpu.2/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.2 rm -rf /apps/var/cpu.3/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.3 rm -rf /apps/var/cpu.4/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.4 rm -rf /apps/var/cpu.5/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.5 rm -rf /apps/var/cpu.6/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/var/cpu.6 rm -rf /apps/var/rfs cp -raf /rfs/packages/template-var/ppc_74xx-mvl-simba/cur/rfs /apps/var touch /apps/var/rfs/var-rfs-ok INFO: Refresh completed successfully INFO: template OK - /apps/cdata/rfs INFO: recreating /apps/cdata/rfs INFO: refreshing /apps/cdata with template from /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur for rfs rm -rf /apps/cdata/cpu.0/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/cdata/cpu.0 rm -rf /apps/cdata/cpu.1/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvEthernet Channel Bonding Driver: v3.2.5 (March 21, 2008) l-simba/cur/_cpubonding: MII link monitoring set to 100 ms .N/rfs /apps/cdata/cpu.1 rm -rf /apps/cdata/cpu.2/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/cdata/cpu.2 rm -rf /apps/cdata/cpu.3/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/cdata/cpu.3 rm -rf /apps/cdata/cpu.4/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/cdata/cpu.4 rm -rf /apps/cdata/cpu.5/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/cdata/cpu.5 rm -rf /apps/cdata/cpu.6/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/_cpu.N/rfs /apps/cdata/cpu.6 rm -rf /apps/cdata/rfs cp -raf /rfs/packages/template-cdata/ppc_74xx-mvl-simba/cur/rfs /apps/cdata touch /apps/cdata/rfs/cdata-rfs-ok INFO: Refresh completed successfully INFO: template OK - /apps/cdata/sysetc INFO: /mnt/tmp/saved-data.tar not found INFO: /mnt/tmp/saved-cdata.tar not found earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S55bind_dirs mount -n --bind /apps/data/cpu.0 configuring PHY 2:01 advertise:00000060 speed:0 duplex:0 /apps/data/cpu mount -n --bind /apps/var/cpu.0 /apps/var/cpu mount -n --bind /apps/cdata/cpu.0 /apps/cdata/cpu mount -n --bind /apps/cdata/cpu.0/rfs/etc /etc earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S58get_dir_flags.sh earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S61revert_rfs_files /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/bin/rfs-file-premodify --verbose --revert earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S62init_bonding_driver.sh init_bonding_driver: No /apps/data/scos/system/bonding.conf, using defaults init_bonding_driver: Loaded bonding module successfully with miimon = 100 earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S63set_net_vars_and_dbg_ip.sh SYS_INTERNAL_IP_SLOT01_CPU00=192.168.207.145 SYS_INTERNAL_IP_CPU00=192.168.207.145 SYS_INTERNAL_IP_CPU01=192.168.207.146 SYS_INTERNAL_IP_CPU02=192.168.207.147 SYS_INTERNAL_IP_CPU03=192.168.207.148 SYS_INTERNAL_IP_CPU04=192.168.207.149 SYS_INTERNAL_IP_CPU05=192.168.207.150 SYS_INTERNAL_IP_CPU06=192.168.207.151 SYS_INTERNAL_IP_BASE=192.168.207.144 SYS_INTERNAL_IP_NETMASK=255.255.255.240 SYS_INTERNAL_IP_SLOT02_CPU00=192.168.207.161 EXEC: ifconfig eth0 192.168.207.241 netmask 255.255.255.240 SYS_INTER_SLOT_IF=eth0 SYS_INTER_SLOT_BASE=192.168.207.240 SYS_INTER_SLOT_IP=192.168.207.241 EXEC: route add -net 192.168.207.160 netmask 255.255.255.240 gw 192.168.207.242 INFO: Setting host name to 'unknown' hostname unknown SYS_MNG_IF1=eth1 SYS_MNG_IF2=eth2 SYS_BOND_IF=bond0 earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S67tune_kernel_proc echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore echo 4096 87380 196608 > /proc/sys/net/ipv4/tcp_rmem echo 4096 16384 196608 > /proc/sys/net/ipv4/tcp_wmem echo 1 > /proc/sys/kernel/panic_on_oops echo 100 > /proc/sys/vm/dirty_writeback_centisecs echo 100 > /proc/sys/vm/dirty_expire_centisecs earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S72mount_nfs INFO: no NFS base, no (debug) NFS mounts earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S73nfs_bind_site earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S75pkg_upgrade_fixup /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/bin/update_pkg_next: started, link_dir=/pkg /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/bin/update_pkg_next: finished earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S77pkg_auto_link earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S78cf_freeze_const Freezing /pkg and /packages... Running: freeze_const grep /cf/const /proc/mounts /dev/hda3 /cf/const ext3 rw,noatime,errors=panic,data=ordered 0 0 mount -n -o ro,noatime,remount /cf/const earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S79update_apps_bin earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S85rfs_boot_cleanup earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S88run_pkg_earlyinit ===== packages earlyinit - Start S88run_pkg_earlyinit: executing /pkg/kernel/sys/earlyinit.d/S09kernel_tune_env echo -1 > /proc/sys/kernel/sched_rt_runtime_us WARNING: S09kernel_tune_env: DEBUG PATCH: timer int flags default set to 0xffff (rather than none) proc-param set /proc/scos/basicdata.00 timer_int_flags 0xffff proc-param set /proc/scos/basicdata.01 timer_int_flags 0xffff proc-param set /proc/scos/basicdata.02 timer_int_flags 0xffff proc-param set /proc/scos/basicdata.03 timer_int_flags 0xffff proc-param set /proc/scos/basicdata.04 timer_int_flags 0xffff proc-param set /proc/scos/basicdata.05 timer_int_flags 0xffff proc-param set /proc/scos/basicdata.06 timer_int_flags 0xffff S88run_pkg_earlyinit: executing /pkg/distro-debug/sys/earlyinit.d/S15create_dd mkdir -p --mode=777 apps/data/dd mkdir -p --mode=777 /dd/packages /dd/images /dd/upload /dd/download /dd/bin /dd/log /dd/tmpfs /dd/tmp /dd/mnt mount -n -t tmpfs none /dd/tmpfs S88run_pkg_earlyinit: executing /pkg/kernel/sys/earlyinit.d/S15add-kernel-devices S88run_pkg_earlyinit: executing /pkg/genesis/sys/earlyinit.d/S23app-set-weak-genesis sys-launch --verbose --app-set-weak genesis S88run_pkg_earlyinit: executing /pkg/scos/sys/earlyinit.d/S25app-set-weak-scos sys-launch --verbose --app-set-weak scos INFO: sys-launch: app scos already selected S88run_pkg_earlyinit: executing /pkg/diag/sys/earlyinit.d/S30app-set-weak-diag sys-launch --verbose --app-set-weak diag S88run_pkg_earlyinit: executing /pkg/distro-core/sys/earlyinit.d/S30merge-site-users S88run_pkg_earlyinit: executing /pkg/null-app/sys/earlyinit.d/S39app-set-weak-null-app sys-launch --verbose --app-set-weak null-app S88run_pkg_earlyinit: executing /pkg/distro-core/sys/earlyinit.d/S55set-hostname-in-hosts INFO: setting unknown to 127.0.0.1 in /etc/hosts rfs-file-premodify /etc/hosts cp -fa /etc/hosts /etc/hosts.tmp echo 127.0.0.1 unknown >> /etc/hosts.tmp mv -f /etc/hosts.tmp /etc/hosts ===== packages earlyinit - End earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S90select_launched_app.sh Running sys-launch --show: scos.app app is scos.app app is scos SYS_LAUNCHED_APP=scos earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S92save_sysvars export | grep 'declare -x SYS_' > /apps/sysetc/sysvars.sh earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S95update_apps_bin earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S96init_bonding_driver.sh init_bonding_driver: No /apps/data/scos/system/bonding.conf, using defaults insmod: error inserting '/lib/modules/bonding.ko': -1 File exists init_bonding_driver: Unable to load bonding module with miimon = 100 earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S97set_net_vars_and_dbg_ip.sh SYS_INTERNAL_IP_SLOT01_CPU00=192.168.207.145 SYS_INTERNAL_IP_CPU00=192.168.207.145 SYS_INTERNAL_IP_CPU01=192.168.207.146 SYS_INTERNAL_IP_CPU02=192.168.207.147 SYS_INTERNAL_IP_CPU03=192.168.207.148 SYS_INTERNAL_IP_CPU04=192.168.207.149 SYS_INTERNAL_IP_CPU05=192.168.207.150 SYS_INTERNAL_IP_CPU06=192.168.207.151 SYS_INTERNAL_IP_BASE=192.168.207.144 SYS_INTERNAL_IP_NETMASK=255.255.255.240 SYS_INTERNAL_IP_SLOT02_CPU00=192.168.207.161 EXEC: ifconfig eth0 192.168.207.241 netmask 255.255.255.240 SYS_INTER_SLOT_IF=eth0 SYS_INTER_SLOT_BASE=192.168.207.240 SYS_INTER_SLOT_IP=192.168.207.241 EXEC: route add -net 192.168.207.160 netmask 255.255.255.240 gw 192.168.207.242 SIOCADDRT: File exists ERROR: Failed to configure internal network routes SYS_MNG_IF1=eth1 SYS_MNG_IF2=eth2 SYS_BOND_IF=bond0 earlyinit.inittab: sourcing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S98init_8021q.sh install_8021q_module: /lib/modules/8021q.ko not found earlyinit.inittab: executing /rfs/packages/platform-core-rfs/ppc_74xx-mvl-simba/cur/rc.d/earlyinit.d/S99save_sysvars export | grep 'declare -x SYS_' > /apps/sysetc/sysvars.sh ##### /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/inittab/earlyinit.inittab: END Remounting root filesystem...done. Checking all file systems: fsck fsck 1.40 (29-Jun-2007) rm: cannot remove `/fastboot': Read-only file system rm: cannot remove `/forcefsck': Read-only file system Setting kernel variables: sysctl. Mounting local filesystems: mount nothing was mounted Setting up networking .... Setting the system clock.. System Clock set to: Sat Feb 3 04:34:10 UTC 2007. Starting network interfaces: done. Starting portmap daemon.... Initializing random number generator...: done. INIT: Entering runlevel: 3 Starting system log daemon: syslogd klogd. ##### /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/inittab/launch_pkg.inittab --start: START Setting system variables from /apps/sysetc/sysvars.sh INFO: launch_pkg.inittab: SYS_LAUNCHED_APP=scos RUNLEVEL=3 (Starting up) launch_pkg.inittab: executing /pkg/kernel/sys/launch.d/always/S04kernel_log_dir_maint tar czf /apps/var/kernel/prev-logs/kernel-log-0237.tgz -C /apps/var/kernel/log . rm -rf /apps/var/kernel/log mkdir -p /apps/var/kernel/log rm -f /apps/var/kernel/prev-logs/kernel-log-0227.tgz launch_pkg.inittab: executing /pkg/pack/sys/launch.d/always/S05startup_maint launch_pkg.inittab: executing /pkg/kernel/sys/launch.d/always/S15fverion_at_boot fversion > /apps/var/kernel/log/fversion-boot.txt launch_pkg.inittab: executing /pkg/kernel/sys/launch.d/always/S15kernel_tune_env_late echo 511 > /sys/devices/platform/fsl-gianfar.1/net:eth0/fifo_threshold echo 255 > /sys/devices/platform/fsl-gianfar.1/net:eth0/fifo_starve echo 511 > /sys/devices/platform/fsl-gianfar.1/net:eth0/fifo_starve_off echo 511 > /sys/devices/platform/fsl-gianfar.2/net:eth1/fifo_threshold echo 255 > /sys/devices/platform/fsl-gianfar.2/net:eth1/fifo_starve echo 511 > /sys/devices/platform/fsl-gianfar.2/net:eth1/fifo_starve_off echo 511 > /sys/devices/platform/fsl-gianfar.3/net:eth2/fifo_threshold echo 255 > /sys/devices/platform/fsl-gianfar.3/net:eth2/fifo_starve echo 511 > /sys/devices/platform/fsl-gianfar.3/net:eth2/fifo_starve_off launch_pkg.inittab: executing /pkg/nsup/sys/launch.d/always/S16nsup-init 20070203.043412 EXEC: S16nsup-init: mv /apps/var/nsup/log /apps/var/nsup/prev-logs/0202 20070203.043412 EXEC: S16nsup-init: rm -rf /apps/var/nsup/prev-logs/0192 20070203.043412 EXEC: S16nsup-init: rm -rf /apps/var/nsup/status 20070203.043412 EXEC: S16nsup-init: mkdir -p /apps/var/nsup/status /apps/cdata/nsup 20070203.043412 EXEC: S16nsup-init: nsup-ssh --init 20070203.043412 INFO: nsup-ssh: ===== INIT launch_pkg.inittab: executing /pkg/slaves/sys/launch.d/always/S20slaves-init rm -rf /apps/var/slaves/status /apps/var/slaves/cmd mkdir -p /apps/var/slaves/status /apps/var/slaves/cmd launch_pkg.inittab: executing /pkg/nsup/sys/launch.d/always/S23nsup-start launch_pkg.inittab: executing /pkg/slaves/sys/launch.d/always/S31slaves-mark-cpu-up touch /apps/var/slaves/status/cpu-up.00 launch_pkg.inittab: executing /pkg/nsup/sys/launch.d/always/S42nsup-sys-wdog launch_pkg.inittab: executing /pkg/distro-debug/sys/launch.d/always/S45distro-debug-start distro-debug-start debug-xinetd --init --verbose debug-xinetd: running command: 'mkdir -p /apps/var/distro-debug/xinetd' debug-xinetd: running command: 'rm -f /apps/var/distro-debug/xinetd/*.pid' debug-sshd --init --verbose Info: debug-sshd: running command: 'cp /pkg/distro-debug/openssh/sshd_config /apps/cdata/distro-debug/ssh/sshd_config' Info: debug-sshd: running command: 'cp -f /apps/data/scos/system/p3hidden/ssh/ssh_host_*key* /apps/cdata/distro-debug/ssh' Info: debug-sshd: about to create ssh keys Info: debug-sshd: avoiding key generation of type rsa1. Info: debug-sshd: avoiding key generation of type rsa. Info: debug-sshd: avoiding key generation of type dsa. launch_pkg.inittab: executing /pkg/kernel/sys/launch.d/always/S50kernel_flash_log tr -d \\377 < /dev/platform/mtd/log0 > /apps/var/kernel/log/bootflash-log0 tr -d \\377 < /dev/platform/mtd/log1 > /apps/var/kernel/log/bootflash-log1 cp -f /proc/scos/flash-log /apps/var/kernel/log/bootflash-proc-flash-log proc-param get /proc/scos/flash-log fl_active_area flash_eraseall /dev/platform/mtd/log0 Erasing 128 Kibyte @ 0 -- 0 % complete. launch_pkg.inittab: executing /pkg/scos/sys/launch.d/S70scos_init_run EXEC: S70scos_init_run: scos --init INFO: scos: At Sat Feb 3 04:34:13 UTC 2007 (Sat Feb 3 04:34:13 UTC 2007) executing /apps/bin/scos --init INFO: scos: /apps/data/scos/system/config.txt found, extra scos flags are '' EXEC: scos: mv /apps/var/scos/log /apps/var/scos/prev-logs/0217 EXEC: scos: rm -rf /apps/var/scos/prev-logs/0207 EXEC: scos: rm -rf /apps/var/scos/status /apps/var/scos/cmd EXEC: scos: mkdir -p /apps/var/scos/status /apps/var/scos/cmd INFO: scos: scos-init process group is 1496 of PID 1711 EXEC: scos: scos_xinetd --init --verbose scos_xinetd: running command: 'mkdir -p /apps/var/scos/xinetd' scos_xinetd: running command: 'rm -f /apps/var/scos/xinetd/*.pid' scos_xinetd: running command: 'touch /apps/var/scos/log/scos-xinetd-ssh.00.log /apps/var/scos/log/scos-xinetd-telnet.00.log /apps/var/scos/log/scos-xinetd-shell.00.log' EXEC: scos: scos_sntp --init --verbose Info: scos_sntp: stop_ntpd: ntpd is not running. cool. scos_sntp: running command: 'rm -f /apps/var/scos/ntpd/scos_ntp.conf' scos_sntp: running command: 'rm -f /apps/var/scos/ntpd/scos_ntp.pid' scos_sntp: running command: 'mkdir -p /apps/var/scos/ntpd' DEBUG: scos: exit code is 0 INFO: scos: cmd-server started at Sat Feb 3 04:34:14 UTC 2007 DEBUG: scos: cmd-server polls /apps/var/scos/cmd every 3 seconds EXEC: S70scos_init_run: scos --start-formal INFO: scos: At Sat Feb 3 04:34:14 UTC 2007 (Sat Feb 3 04:34:14 UTC 2007) executing /apps/bin/scos --start-formal INFO: scos: /apps/data/scos/system/config.txt found, extra scos flags are '' INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.00.log' on 00 using /apps/var/scos/cmd/scos-start.1787.00 at Sat Feb 3 04:34:14 UTC 2007 DEBUG: scos: exit code is 0 launch_pkg.inittab: executing /pkg/guardianangel/sys/launch.d/always/S80guardianangel_info launch_pkg.inittab: executing /pkg/guardianangel/sys/launch.d/always/S81guardianangel_runner ##### /rfs/packages/distro-core-rfs/ppc_74xx-mvl/cur/inittab/launch_pkg.inittab: END unknown login: INFO: scos: cmd-server: /apps/var/scos/cmd/scos-start.1787.00 found at Sat Feb 3 04:34:17 UTC 2007. Dumping it scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.00.log EXEC: scos: setsid /apps/var/scos/cmd/scos-start.1787.00.run INFO: scos: At Sat Feb 3 04:34:17 UTC 2007 (Sat Feb 3 04:34:17 UTC 2007) executing /apps/bin/scos --run -- INFO: scos: /apps/data/scos/system/config.txt found, extra scos flags are '' INFO: scos: Disabling SCOS kernel app WD EXEC: scos: proc-param set /proc/scos/wdog-app.00 enable 0 INFO: scos: Unmarking scos ready at /apps/var/scos/status/scos-ready.00 at Sat Feb 3 04:34:17 UTC 2007 INFO: scos: scos-run process group is 1808 of PID 1809 EXEC: scos: mkdir -p /apps/data/scos/system/p3hidden/bsp /apps/cdata/scos /apps/tdata/scos /apps/var/scos EXEC: scos: mkdir -p /apps/var/cpu/scos/log /apps/data/cpu/scos /apps/data/cpu/scos/system/p3hidden/bsp EXEC: scos: export LD_LIBRARY_PATH=/pkg/scos:/pkg/scos/um:/pkg/net-snmp/lib:/pkg/p0f-tool/lib: EXEC: scos: export SNMPCONFPATH=/apps/data/scos/system/p3hidden/net-snmp EXEC: scos: export MIBDIRS=/pkg/scos/net-snmp/mibs:/pkg/net-snmp/mibs INFO: scos: Removing all nsup dirs from /apps/data/scos... EXEC: scos: rm -rf /apps/data/scos/nsup.* /apps/var/scos/nsup.* EXEC: scos: scos-reboot-loop-manager --mark-start EXEC: scos: eval scos_preload_configure --verbose >> /apps/var/scos/log/preload_config.00.log bonding: bond0: Warning: failed to get speed and duplex from eth1, assumed to be 100Mb/sec and Full. bonding: bond0: making interface eth1 the new active one. bonding: bond0: first active interface up! bonding: bond0: enslaving eth1 as an active interface with an up link. BONDING: attachebonding: bond0: Warning: failed to get speed and duplex from eth2, assumed to be 100Mb/sec and Full. bonding: bond0: enslaving eth2 as a backup interface with an up link. BONDING: attached eth2 to bond0 DEBUG: scos: cwd: /pkg/scos INFO: scos: Gathering system status to /apps/var/scos/log/scos-sys-status-before.00.log configuring PHY 2:02 advertise:0000006F speed:0 duplex:0 configuring PHY 2:03 advertise:0000006F speed:0 duplex:0 INFO: scos: Marking scos ready at /apps/var/scos/status/scos-ready.00 at Sat Feb 3 04:34:24 UTC 2007 EXEC: scbonding: bond0: link status definitely down for interface eth1, disabling it os: ulimit -s 20bonding: bond0: making interface eth2 the new active one. 0 EXEC: scos: eval echo /apps/data/scos/%e_%p_sig_%s_%t.core > /proc/sys/kernel/core_pattern INFO: scos: runnbonding: bond0: link status definitely down for interface eth2, disabling it ing /pkg/scos/scbonding: bond0: now running without any active interface ! os-main [pre-slaves] at Sat Feb 3 04:34:24 UTC 2007 EXEC: scos: eval /pkg/scos/scos-main -full -ucd /pkg/um-agent -uid /pkg/um-installs -wd /pkg/scos -hd /apps/data/scos -full -ucd /pkg/um-agent -uid /pkg/um-installs -shell_server 1 -dpcd /apps/data/cpu/scos -pre_slaves & INFO: scos: scos-main PID is 2306 PHY: 2:02 - Link is Up - 100/Full bonding: bond0: link status definitely up for interface eth1. bonding: bond0: making interface eth1 the new active one. bonding: bond0: first active interface up! GNU C lib: glibc 2.5.90 Pthreads lib: NPTL 2.5.90 Linux system information: sysname: Linux machine: ppc version: #4 SMP Tue Jan 6 14:47:02 IST 2015 release: 2.6.26.2 is_stadalone_mode : 0 is_core_id : 0 max_cofico : 2 is_no_shell_in_agents : 0 is_bist_mode : 0 is_hw_inproc_mode : 0 is_hw_version_check : 1 bp_speed : 2 is_script : 0 script : INFO: I am a super-master blade, checking if a second simba exists. INFO: command 'nsup-blade-status --inserted ' returned 7. output:'Blade in slot 2 does not exist '. error:'' TIME_InitCommon(): Done. TIME_MiliSecPerSysTick=1, TIME_SysTickPerSec=1000. SMC ISP upgrade procedure version 1.0.0 SMCPLD: actual version 0x8274 legal version ranges: accept-ranges = { [0x8274,0x8274] }, deny-ranges = { } match-check: up result: match No need to upgrade SMC version is up to date smc upgrade return value : 0 EXEC: scos: ulimit -s 8192 INFO: scos: /pkg/scos/scos-main [pre-slaves] exited with status 100 at Sat Feb 3 04:34:33 UTC 2007 (Sat Feb 3 04:34:33 UTC 2007) - proceed OK INFO: scos: Gathering system status to /apps/var/scos/log/scos-sys-status-after.00.logskynet: enabling masters' channels EXEC: scos: slaves-load EXEC: slaves-load: set_globals EXEC: slaves-load: skynet_init_master EXEC: slaves-load: ifconfig skynet0 192.168.207.145 netmask 255.255.255.240 EXEC: slaves-load: slaves_shut_nfs /etc/init.d/nfs-kernel-server stop Stopping NFS kernel daemon: mountd nfsd. Unexporting directories for NFS kernel daemon.... unknown version (3 for prog 100003, nfsd)fs-common stop EXEC: slaves-load: rm -rf /var/lib/nfs/* EXEC: slaves-load: touch /var/lib/nfs/etab /var/lib/nfs/rmtab /var/lib/nfs/xtab EXEC: slaves-load: chmod 611 /var/lib/nfs/etab /var/lib/nfs/rmtab /var/lib/nfs/xtab EXEC: slaves-load: mount -t nfsd nfsd /proc/fs/nfs EXEC: slaves-load: /etc/init.d/nfs-common start EXEC: slaves-load: /etc/init.d/nfs-kernel-server start Exporting directories for NFS kernel daemon.... Starting NFS kernel daemon: nfsd mountd. EXEC: slaves-load: kernel-load-slave-boot dd bs=1024 seek=0 count=3072 if=/dev/platform/mtd/kernel0 of=/dev/platform/pci_slave_boot 3072+0 records in 3072+0 records out 3145728 bytes (3.1 MB) copied, 1.48543 seconds, 2.1 MB/s dd bs=1024 seek=3072 count=512 if=/dev/platform/mtd/uboot0 of=/dev/platform/pci_slave_boot 512+0 records in 512+0 records out 524288 bytes (524 kB) copied, 0.248432 seconds, 2.1 MB/s dd bs=1024 seek=3584 count=512 if=/dev/platform/mtd/uboot1 of=/dev/platform/pci_slave_boot 512+0 records in 512+0 records out 524288 bytes (524 kB) copied, 0.246737 seconds, 2.1 MB/s dd bs=1024 seek=2816 count=128 if=/dev/platform/mtd/uboot-env0 of=/dev/platform/pci_slave_boot 128+0 records in 128+0 records out 131072 bytes (131 kB) copied, 0.06179 seconds, 2.1 MB/s dd bs=1024 seek=2944 count=128 if=/dev/platform/mtd/uboot-env1 of=/dev/platform/pci_slave_boot 128+0 records in 128+0 records out 131072 bytes (131 kB) copied, 0.06218 seconds, 2.1 MB/s INFO: slaves-load: CPU 1 - starting INFO: slaves-load: CPU 2 - starting INFO: slaves-load: CPU 3 - starting INFO: slaves-load: CPU 4 - starting INFO: slaves-load: CPU 5 - starting INFO: slaves-load: CPU 6 - starting INFO: slaves-load: waited 0 of 240 seconds INFO: slaves-load: waited 10 of 240 seconds INFO: slaves-load: waited 20 of 240 seconds skynet: TX channel 1 activity changed to 1 skynet: TX channel 0 activity changed to 1 skynet: RX channel 1 activity changed to 1 skynet: TX channel 2 activity changed to 1 skynet: RX channel 2 activity changed to 1 skynet: RX channel 0 activity changed to 1 skynet: TX channel 4 activity changed to 1 skynet: TX channel 5 activity changed to 1 skynet: TX channel 3 activity changed to 1 skynet: RX channel 3 activity changed to 1 skynet: RX channel 4 activity changed to 1 skynet: RX channel 5 activity changed to 1 svc: 192.168.207.147, port=42879: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.146, port=56998: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.148, port=44849: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.147, port=49898: <4>svc: 192.168.207.146, port=33372: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.148, port=33911: unknown version (3 for prog 100003, nfsd) unknown version (3 for prog 100003, nfsd) INFO: slaves-load: waited 30 of 240 seconds svc: 192.168.207.146, port=33006: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.148, port=57171: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.147, port=48489: unknown version (3 for prog 100003, nfsd) svc: 192.168.207.147, port=41855: unknown version (3 for prog 100003, nfsd) INFO: slaves-load: waited 40 of 240 seconds INFO: slaves-load: waited 50 of 240 seconds INFO: slaves-load: waited 60 of 240 seconds INFO: slaves-load: CPU 4 - up after 62 seconds INFO: slaves-load: CPU 1 - up after 66 seconds INFO: slaves-load: CPU 2 - up after 66 seconds INFO: slaves-load: CPU 3 - up after 68 seconds INFO: slaves-load: CPU 5 - up after 70 seconds INFO: slaves-load: waited 70 of 240 seconds INFO: slaves-load: CPU 6 - up after 72 seconds INFO: slaves-load: CPUs [ 1 2 3 4 5 6 ] are up after 72 seconds DEBUG: scos: Slaves up list:'01 02 03 04 05 06 ' INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.01.log' on 01 using /apps/var/scos/cmd/scos-start.1809.01 at Sat Feb 3 04:35:50 UTC 2007 INFO: scos: Running 'scos --run --secondary -- 2>&1 | tee -a /apps/var/scos/log/scos-run-sec.01.log' on 01 using /apps/var/scos/cmd/scos-start-sec.1809.01 at Sat Feb 3 04:35:50 UTC 2007 INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.02.log' on 02 using /apps/var/scos/cmd/scos-start.1809.02 at Sat Feb 3 04:35:50 UTC 2007 INFO: scos: Running 'scos --run --secondary -- 2>&1 | tee -a /apps/var/scos/log/scos-run-sec.02.log' on 02 using /apps/var/scos/cmd/scos-start-sec.1809.02 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.03.log' on 03 using /apps/var/scos/cmd/scos-start.1809.03 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run --secondary -- 2>&1 | tee -a /apps/var/scos/log/scos-run-sec.03.log' on 03 using /apps/var/scos/cmd/scos-start-sec.1809.03 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.04.log' on 04 using /apps/var/scos/cmd/scos-start.1809.04 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run --secondary -- 2>&1 | tee -a /apps/var/scos/log/scos-run-sec.04.log' on 04 using /apps/var/scos/cmd/scos-start-sec.1809.04 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.05.log' on 05 using /apps/var/scos/cmd/scos-start.1809.05 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run --secondary -- 2>&1 | tee -a /apps/var/scos/log/scos-run-sec.05.log' on 05 using /apps/var/scos/cmd/scos-start-sec.1809.05 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run -- 2>&1 | tee -a /apps/var/scos/log/scos-run.06.log' on 06 using /apps/var/scos/cmd/scos-start.1809.06 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Running 'scos --run --secondary -- 2>&1 | tee -a /apps/var/scos/log/scos-run-sec.06.log' on 06 using /apps/var/scos/cmd/scos-start-sec.1809.06 at Sat Feb 3 04:35:51 UTC 2007 INFO: scos: Waiting all slaves to reach scos-ready INFO: scos: Waited 0 of 180 seconds INFO: scos: CPU 02 (secondary) - reached scos-ready after 5 seconds INFO: scos: CPU 04 - reached scos-ready after 5 seconds INFO: scos: CPU 04 (secondary) - reached scos-ready after 5 seconds INFO: scos: CPU 02 - reached scos-ready after 6 seconds INFO: scos: CPU 03 - reached scos-ready after 7 seconds INFO: scos: CPU 03 (secondary) - reached scos-ready after 7 seconds INFO: scos: CPU 05 - reached scos-ready after 7 seconds INFO: scos: CPU 05 (secondary) - reached scos-ready after 7 seconds INFO: scos: CPU 06 - reached scos-ready after 7 seconds INFO: scos: CPU 06 (secondary) - reached scos-ready after 7 seconds INFO: scos: CPU 01 - reached scos-ready after 8 seconds INFO: scos: CPU 01 (secondary) - reached scos-ready after 8 seconds INFO: scos: All CPUs reached scos-ready after 8 seconds EXEC: scos: eval echo 2 > /proc/sys/vm/overcommit_memory EXEC: scos: eval echo 100 > /proc/sys/vm/overcommit_ratio PATCH PATCH PATCH: Adjusting default socket Recv-Q size for Col/Disp to work EXEC: scos: cat /proc/sys/net/core/rmem_default 108544 EXEC: scos: eval echo 2000000 > /proc/sys/net/core/rmem_default EXEC: scos: cat /proc/sys/net/core/rmem_default 2000000 EXEC: scos: cat /proc/sys/net/core/rmem_max 131071 EXEC: scos: eval echo 10000000 > /proc/sys/net/core/rmem_max EXEC: scos: cat /proc/sys/net/core/rmem_max 10000000 EXEC: scos: cat /proc/sys/net/ipv4/udp_rmem_min 4096 EXEC: scos: eval echo 2000000 > /proc/sys/net/ipv4/udp_rmem_min EXEC: scos: cat /proc/sys/net/ipv4/udp_rmem_min 2000000 PATCH PATCH PATCH: Adjusting default socket Xmit-Q size for Col/Disp to work EXEC: scos: cat /proc/sys/net/core/wmem_default 108544 EXEC: scos: eval echo 1000000 > /proc/sys/net/core/wmem_default EXEC: scos: cat /proc/sys/net/core/wmem_default 1000000 EXEC: scos: cat /proc/sys/net/core/wmem_max 131071 EXEC: scos: eval echo 10000000 > /proc/sys/net/core/wmem_max EXEC: scos: cat /proc/sys/net/core/wmem_max 10000000 EXEC: scos: cat /proc/sys/net/ipv4/udp_wmem_min 4096 EXEC: scos: eval echo 1000000 > /proc/sys/net/ipv4/udp_wmem_min EXEC: scos: cat /proc/sys/net/ipv4/udp_wmem_min 1000000 DEBUG: scos: cwd: /pkg/scos INFO: scos: Gathering system status to /apps/var/scos/log/scos-sys-status-before.00.log EXEC: scos: ulimit -s 200 EXEC: scos: ulimit -v 102400 EXEC: scos: eval scos-sys-cmd-server -s -p 3333 -tl 1 >> /apps/var/scos/log/scos-sys-cmd-server.00.log & EXEC: scos: ulimit -s 8192 EXEC: scos: ulimit -v unlimited INFO: scos: scos-sys-cmd-server PID is 3067 INFO: scos: Marking scos ready at /apps/var/scos/status/scos-ready.00 at Sat Feb 3 04:36:05 UTC 2007 EXEC: scos: ulimit -s 200 EXEC: scos: eval echo /apps/data/scos/%e_%p_sig_%s_%t.core > /proc/sys/kernel/core_pattern INFO: scos: running /pkg/scos/scos-main [normal] at Sat Feb 3 04:36:05 UTC 2007 EXEC: scos: eval /pkg/scos/scos-main -full -ucd /pkg/um-agent -uid /pkg/um-installs -wd /pkg/scos -hd /apps/data/scos -full -ucd /pkg/um-agent -uid /pkg/um-installs -shell_server 1 -dpcd /apps/data/cpu/scos & INFO: scos: scos-main PID is 3251 GNU C lib: glibc 2.5.90 Pthreads lib: NPTL 2.5.90 Linux system information: sysname: Linux machine: ppc version: #4 SMP Tue Jan 6 14:47:02 IST 2015 release: 2.6.26.2 is_stadalone_mode : 0 is_core_id : 0 max_cofico : 2 is_no_shell_in_agents : 0 is_bist_mode : 0 is_hw_inproc_mode : 0 is_hw_version_check : 1 bp_speed : 2 is_script : 0 script : INFO: I am a super-master blade, checking if a second simba exists. INFO: command 'nsup-blade-status --inserted ' returned 7. output:'Blade in slot 2 does not exist '. error:'' SeAppMain Params: ============================================= isMaster: True isSuperMaster: True isDualSimbaMode: False isSingleSimbaMode: False bootSlot: 1 superMasterSlot: 1 ipOfMasterOfOtherSimba: 192.168.207.161 doAutoSyncOfOtherBlade: True loading in single simba mode. '-dual_simba switch'=0 boot-slot=1 super-master-slot=1 User command line 0 () is set to '/pkg/scos/scos-main' User command line 1 (-wd) is set to '/pkg/scos' User command line 2 (-hd) is set to '/apps/data/scos' User command line 3 (-shell_server) is set to '1' User command line 4 (-ucd) is set to '/pkg/um-agent' User command line 5 (-uid) is set to '/pkg/um-installs' User command line 6 (-dpcd) is set to '/apps/data/cpu/scos' Changing dir to /pkg/scos. shell_runner(): Core number is 0. shell_runner(): Waiting for const-db files to be read. SRM STDOUT list 0 created successfully. SRM STDERR list 1 created successfully. SRM created successfully. TIME_InitCommon(): Done. TIME_MiliSecPerSysTick=1, TIME_SysTickPerSec=1000. TIME_Init(): Done. SysWatchdog scos-watchdog-monitor was enabled Spawning Boot Time Watchdog Setting remote RPC server 127.0.0.1 on port 3333, output fifo is /tmp/sys_cmd_fifo22370 , debug fifo /tmp/sys_cmd_fifo_for_debug22370 The sys cmd client was init successfully,connection to the server was checked CardMain(): Beginning normal initialization... SeAppMain(): Initializing code root directory to '/pkg/scos', as requested by caller. SeAppMain(): Initializing scos home directory to '/apps/data/scos', as requested by caller. SeAppMain(): Initializing um-agent code root directory to '/pkg/um-agent', as requested by caller. SeAppMain(): Initializing um-agent installs root directory to '/pkg/um-installs', as requested by caller. Statring memeory initializations. Mem info initialized: proc status file is /proc/3251/status. totalmem 2028668 kB. totalswap 0 kB Part_Init() called Requested memory = 1141505456 System heap not to touch = 100000000 Available memory before allocation = 1506750464 Part_Init(): Allocated 1141505456 bytes for partitions memory, 365244416 bytes left in system heap (Largest block left is 365244416). Memory initialization [OK] INFO: ScosMessagingManager::initScosMessagingManager(): Adding 23 definitions. initPatch: patchRemoteIp=0xc0a8cfa1. INFO: Total inter-scos queues size to each scos process (by mproc ID): 13697024,557056,557056,557056,557056,557056,557056,557056,557056,557056,557056,557056,557056, INFO: ScosMessagingManager::initScosMessagingManager(): Calling MprocCommon::initQueueDefinitions with 142 queues, hash=22100826. Calling Hw Init ... RAM size is 2028668KB (> min=1994752KB) -------------------- SS -------------------- is_ss_mode : 0 is_sup_master : 1 is_sec_master : 0 blade : 0 load_without_nala : 0 remote_ip : 192.168.207.161 -------------------- board exits -------------------- is_cofico_0_exists : 1 is_cofico_1_exists : 1 is_smc_exists : 1 is_nala_exists : 1 is_second_simba_exists : 0 smc_slot : 1 njc_slot : 0 -------------------- core info exits -------------------- core_id : 0 core , cpu , cofico | local , is_l_master | local_core , ip , l_cpu | valid -------------------------------------------------------------------- -- 00 00 00 | 01 00 | 00 192.168.207.145 0 | 1 -------------------- platform modes -------------------- s_fifo_16 : 0 diag_mode : 0 diag_mode : 0 smc_dpt_tx_queues_exist : 1 nala_dpt_tx_queues_exist : 1 getPlatfromType : 10G -------------------- path -------------------- global_bsp_path : /apps/var/scos/bsp global_diag_path : /apps/data/scos cpu_bsp_path : /apps/data/cpu/scos/system/p3hidden/bsp cpu_diag_path : /apps/data/cpu/scos get_bp_speed : 2 common_clock : 0 ------------------------ FPGA direct mode ------------------------ CLS asked to direct mode CLS Local bus is Direct cls_is_direct_mode : 1 SimbaDPT asked to direct mode SimbaDPT Local bus is Direct simba_dpt_is_direct_mode : 1 NalaDPT asked to direct mode NalaDPT Local bus is Direct nala_dpt_is_direct_mode_0 : 1 NalaDPT asked to direct mode NalaDPT Local bus is Direct nala_dpt_is_direct_mode_1 : 1 IsforceMGBEOn10G : 0 IsForce10GConstellation : 0 --------------------------------- cores table for super master core ---------------------------------- core , cpu , cofico | local , is_l_master | local_core , ip , l_cpu | valid -------------------------------------------------------------------- -- 00 00 00 | 01 00 | 00 192.168.207.145 0 | 1 01 01 00 | 01 01 | 00 192.168.207.146 0 | 1 02 01 00 | 01 00 | 01 192.168.207.146 0 | 1 03 02 00 | 01 00 | 00 192.168.207.147 1 | 1 04 02 00 | 01 00 | 01 192.168.207.147 1 | 1 05 03 00 | 01 00 | 00 192.168.207.148 2 | 1 06 03 00 | 01 00 | 01 192.168.207.148 2 | 1 07 04 01 | 01 01 | 00 192.168.207.149 0 | 1 08 04 01 | 01 00 | 01 192.168.207.149 0 | 1 09 05 01 | 01 00 | 00 192.168.207.150 1 | 1 10 05 01 | 01 00 | 01 192.168.207.150 1 | 1 11 06 01 | 01 00 | 00 192.168.207.151 2 | 1 12 06 01 | 01 00 | 01 192.168.207.151 2 | 1 iter name [allCores] : 0,1,2,3,4,5,6,7,8,9,10,11,12, iter name [allLocalMaster] : 1,7, iter name [allMasterCores] : 1,3,5,7,9,11, iter name [allLBCores] : 0,1,2,3,4,5,6,7,8,9,10,11,12, iter name [allLBLocalMaster] : 1,7, iter name [allLBMasterCores] : 1,3,5,7,9,11, iter name [allRBCores] : iter name [allRBLocalMaster] : iter name [allRBMasterCores] : eth0 ip : c0a8cff1 BSP RPC Init Rpc client server already created Init only link and task Connecting RpcClient 'RPC[01]_PPC[01]_CORE[00]' to IP '192.168.207.146', port 2548 OK delta time : 14158 msec Connecting RpcClient 'RPC[02]_PPC[01]_CORE[01]' to IP '192.168.207.146', port 2549 OK delta time : 2 msec Connecting RpcClient 'RPC[03]_PPC[02]_CORE[00]' to IP '192.168.207.147', port 2548 OK delta time : 2 msec Connecting RpcClient 'RPC[04]_PPC[02]_CORE[01]' to IP '192.168.207.147', port 2549 OK delta time : 3 msec Connecting RpcClient 'RPC[05]_PPC[03]_CORE[00]' to IP '192.168.207.148', port 2548 OK delta time : 3 msec Connecting RpcClient 'RPC[06]_PPC[03]_CORE[01]' to IP '192.168.207.148', port 2549 OK delta time : 2 msec Connecting RpcClient 'RPC[07]_PPC[04]_CORE[00]' to IP '192.168.207.149', port 2548 OK delta time : 3055 msec Connecting RpcClient 'RPC[08]_PPC[04]_CORE[01]' to IP '192.168.207.149', port 2549 OK delta time : 2 msec Connecting RpcClient 'RPC[09]_PPC[05]_CORE[00]' to IP '192.168.207.150', port 2548 OK delta time : 4060 msec Connecting RpcClient 'RPC[10]_PPC[05]_CORE[01]' to IP '192.168.207.150', port 2549 OK delta time : 3 msec Connecting RpcClient 'RPC[11]_PPC[06]_CORE[00]' to IP '192.168.207.151', port 2548 OK delta time : 4 msec Connecting RpcClient 'RPC[12]_PPC[06]_CORE[01]' to IP '192.168.207.151', port 2549 OK delta time : 4 msec RPC servers for master 0 Nala boot - Optical bypass on boot activated = True Nala boot - Electrical bypass detected activating optical bypass Nala boot - Bypass between LICs mode detected NJC ISP upgrade procedure version 1.0.0 NJCPLD: actual version 0x9274 legal version ranges: accept-ranges = { [0x9274,0x9274] }, deny-ranges = { } match-check: up result: match No need to upgrade NJC version is up to date create njc max1668 device create njc summit766 devices Detected Bay Constellation: SPABay[0] - 10G SPABay[1] - 10G SPABay[2] - Not Connected SPABay[3] - Not Connected Detected platform type: 10G Nala eeprom create OK Nala eeprom read OK try to program dpt fpga from file : 'fpga/dpt_nala_s130.rbf' Force diag DPT program = True Forcing Nala DPT configuration program Nala DPT 0 fpga/dpt_nala_s130.rbf njc dpt 0 program ok program Nala DPT 1 fpga/dpt_nala_s130.rbf njc dpt 1 program ok NalaDPT DPT SCOS mode force to queue to 64MB NalaDPT queue size is 64MB SimbaDPTDmx interrupts callback registration succeded SimbaDPTMux interrupts callback registration succeded DSR is supported DSR MIP exists NalaDPT DPT SCOS mode force to queue to 64MB NalaDPT queue size is 64MB SimbaDPTDmx interrupts callback registration succeded SimbaDPTMux interrupts callback registration succeded DSR is supported DSR MIP exists Warning: SPA module 2 not inserted!!! Warning: SPA module 3 not inserted!!! Powering on Spa Powering on Spa Creating SPA c2w Allocating SPA mutex Retraining SPI4.2 channel on SPA bay 1! Creating SPA c2w Allocating SPA mutex Retraining SPI4.2 channel on SPA bay 0! SPA Bay 1: first init phase passed SPA Bay 0: first init phase passed SPA Bay 1: Starting init phase 2 SPA Bay 0: Starting init phase 2 SPA Bay 1: Starting init phase 3 SPA Bay 0: Starting init phase 3 SPA Bay 1: Starting init phase 4 SPA Bay 0: Starting init phase 4 *** SFP initialization failed, stat=6 on port 0 *** SFP initialization failed, stat=6 on port 0 SPA Bay 1: SPA init passed SPA Bay 0: SPA init passed SPA module in SPA bay 1 was found and initialized! Spa Bay 1: Warning pluggable module not present in port 0!!!! SPA module in SPA bay 0 was found and initialized! Spa Bay 0: Warning pluggable module not present in port 0!!!! Num of ports = 2 Setting system to bypass between LICs mode! Process affinity succesffuly set to cpu 1. NalaPortManager: EnableAllPorts to 1 Now! NalaPortManager: Set Enable to 1 Port TenGigabitEthernet0/0[0]. NalaPortManager: Set Enable to 1 Port TenGigabitEthernet1/0[0]. ether_spa_family1_10ge_get_serdes_link_status: 0/0/0: ae10gphy_get_link_status failed 8 ether_spa_family1_set_port_enable: 0/0/0: get_enable failed 8 ether_spa_family1_10ge_get_serdes_link_status: 0/1/0: ae10gphy_get_link_status failed 8 ether_spa_family1_set_port_enable: 0/1/0: get_enable failed 8 Tavor with SMC Cofico 0 : present Cofico 1 : present create tavor-max1668 device create smc_max device create cofico 0 smc_pm i2c bus : OK create cofico 1 smc_pm i2c bus : OK tavor workaround !! Init cofico 0 smc_pm i2c bus : OK Init cofico 1 smc_pm i2c bus : OK Smc eeprom create OK Smc eeprom read OK Create cofico i2c bus 0 devices cofico 0 => board type: P2 Create cofico i2c bus 1 devices cofico 1 => board type: P2 create cofico i2c bus 0 devices create cofico i2c bus 1 devices DPT file name fpga/dpt_smc_s180.rbf program DPT fpga/dpt_smc_s180.rbf dpt program ok program CLS fpga/cls_top.rbf cls program ok SimbaPlatformMasterComponentManagerBase devices init OK Create chassis component manager All Cofico cores pass stage 0 succesfuly ( program FC ) SimbaPlatformMasterComponentManager::Create TSEC memory check okay (required=6242367, we have 6291456) ! Tavor TSEC Created ! CLS version :0x211b Initializing Backplane LinkManager component Cls metering init done ! Cls main component - PLLs connecting to DPT locked ! InitSRAMMemory, polling ok after 1 loops Check CAM InitStaticRegion Check CAM InitV6StaticRegion Check CAM InitV6StarRegion CAM - Init done ! CLS init SDRAM - waited 38 loops CLS init RLDRAM - waited 0 loops Cls interrupts callback registration succeded Cls main - init OK ! SMC DPT SCOS mode force to set queue to 64MB SimbaDPT queue size is 64MB SetNewTxCountersSupported(1) SimbaDPTClsIf interrupts callback registration succeded DPT interrupts was masked successfully SimbaDPTDmx interrupts callback registration succeded SimbaDPTMux interrupts callback registration succeded All Cofico cores pass stage 2 succesfuly (Init Components core:1) All Cofico cores pass stage 2 succesfuly (Init Components core:0) HWSRV_DP_Init OK Simba is inserted in slot 1 and link speed is 20G -> Initializing Secondary SSA link Initializing Backplane Links NalaDPT[0] link synced SimbaDPT[0] link synced read hw-monitor support info and check tree tavor cpu temperature monitoring device support = 0 cofico 0 cpus temperature monitoring device support = 0 cofico 0 current monitoring support = 0 cofico 1 cpus temperature monitoring device support = 0 cofico 1 current monitoring support = 0 run share memory network MprocCommon::initQueues2(): G_HSRV_GetBladeLocalProcId()=0, max_def=12. share memory usage ----------------------------------------- m01 1536KB 1104KB 71% s01 1024KB 544KB 53% m02 1536KB 1232KB 80% s02 1024KB 544KB 53% m03 1536KB 1104KB 71% s03 1024KB 544KB 53% m04 1536KB 1104KB 71% s04 1024KB 544KB 53% m05 1536KB 1104KB 71% s05 1024KB 544KB 53% m06 1536KB 1104KB 71% s06 1024KB 544KB 53% m07 1536KB 1104KB 71% s07 1024KB 544KB 53% m08 1536KB 1104KB 71% s08 1024KB 544KB 53% m09 1536KB 1104KB 71% s09 1024KB 544KB 53% m10 1536KB 1104KB 71% s10 1024KB 544KB 53% m11 1536KB 1104KB 71% s11 1024KB 544KB 53% m12 1536KB 1104KB 71% s12 1024KB 544KB 53% All queues ready. Nala DPT support SE Enable CLS MLIP SimbaDPT version is 4934 Ethernet kernel interface create OK Simba card is inserted in slot 1 Nala card is inserted in slot 3 Cofico 0 is present Cofico 1 is present --------------------------- HW Init finished OK --------------------------- Found 0 recvQueue for collector #0, 'nsm-to-sm-high'. Found 0 xmitQueue for dispatcher #0, 'nsm-to-sm-high'. Found 0 recvQueue for collector #1, 'sm-to-nms-high'. Found 0 xmitQueue for dispatcher #1, 'sm-to-nms-high'. Found 0 recvQueue for collector #2, 'nsm-to-sm-med'. Found 0 xmitQueue for dispatcher #2, 'nsm-to-sm-med'. Found 0 recvQueue for collector #3, 'sm-to-nms-med'. Found 0 xmitQueue for dispatcher #3, 'sm-to-nms-med'. Found 0 recvQueue for collector #4, 'nsm-to-sm-low'. Found 0 xmitQueue for dispatcher #4, 'nsm-to-sm-low'. Found 0 recvQueue for collector #5, 'sm-to-nms-low'. Found 0 xmitQueue for dispatcher #5, 'sm-to-nms-low'. Found 0 recvQueue for collector #6, 'nsm-to-sm-ulow'. Found 0 xmitQueue for dispatcher #6, 'nsm-to-sm-ulow'. Found 0 recvQueue for collector #7, 'sm-to-nms-ulow'. Found 0 xmitQueue for dispatcher #7, 'sm-to-nms-ulow'. SeAppMain(): About to call readConstDbFiles(), emergency=0 Reading platform DB (emergency=0)... Pre-setting 2 constDb variables (hard coded): Reading conf file 'DbConst.txt' from directory '/pkg/scos', sending to slaves... Checking for DB const file '/pkg/scos/DbConst.txt'... Found, reading it. Reading one DB const file '/pkg/scos/DbShape.txt'... Reading one DB const file '/pkg/scos/DbFrmtr.txt'... Reading one DB const file '/pkg/scos/DbParty.txt'... Reading one DB const file '/pkg/scos/DbSched.txt'... Reading one DB const file '/pkg/scos/DbJvm.txt'... Reading one DB const file '/pkg/scos/DbCards.txt'... Reading one DB const file '/pkg/scos/DbCpuUtil.txt'... Reading one DB const file '/pkg/scos/DbMem.txt'... Reading one DB const file '/pkg/scos/DbClsCam.txt'... Reading one DB const file '/pkg/scos/DbRpc.txt'... Reading one DB const file '/pkg/scos/DbSanity.txt'... Reading one DB const file '/pkg/scos/DbNrmFac.txt'... Reading one DB const file '/pkg/scos/DbBox.txt'... Reading one DB const file '/pkg/scos/DbMisc.txt'... Reading one DB const file '/pkg/scos/DbM2Sys.txt'... Reading one DB const file '/pkg/scos/DbOpenOnN.txt'... Reading conf file 'DbConst.txt' from directory '/pkg/scos/Rev=A', sending to slaves... Checking for DB const file '/pkg/scos/Rev=A/DbConst.txt'... Does not exist. Open user defined const db file /apps/data/scos/system/usrconst.txt for read Config file '/apps/data/scos/system/config.txt' found, extracting 'debug const-db' commands from it... Sending const-db END command to slaves... DbConstFileReader::readMainFile(): Sending end command 'END' to slaves after sending 175 vars, took 6393 sys ticks. processSeCommonConstDbInterfaceSpecificParams(): ifType=3, our data=10000000, no need to change queue params. 2238 DB variables initialized out of 2238. Checking if pstack supported pstack isn't supported in this platform The CRASH module was started KernelWatchdog monitor WD Statitics task was triggered init Cpu Utilization Monitor module init succeeded DBG 'common.CriticalSection.DBG_COULD_NOT_CREATE' hash= 4130614079. DBG 'common.CriticalSection.DBG_LIST_FULL' hash= 585703309. DBG 'common.CriticalSection.DBG_REMOVE_NOT_FOUND' hash= 3907609472. DBG 'common.test.msg2' hash= 2670446627. DBG 'common.test.msg3' hash= 3476223276. DBG 'common.test.msgA' hash= 89862758. DBG 'common.DbContainer.DBG_NO_MEMORY' hash= 1179297079. DBG 'common.DbBase.DBG_ADDING' hash= 3674379735. DBG 'common.DbBase.DBG_ADDING_OK' hash= 1198001663. DBG 'common.DbBase.DBG_NULL_PTR' hash= 1853563718. DBG 'common.DbBase.DBG_BAD_INDEX' hash= 1091176901. DBG 'common.DbBase.DBG_SET_CONST' hash= 2538370734. DBG 'common.DbBase.DBG_DUPLICATE_NAME' hash= 1287558230. DBG 'common.DbBase.DBG_NO_MEMORY' hash= 2546497118. Recorded 14 DBG messages, 0 hash collisions. Initializing heap consumers... Finished initialising heap consumers after 3 loops. Calling DBG_Init()... Debug queues are initialized TT Handler init Calling 44 DBG init functions... Registering OpenbloxPortingLayer DBGs... Registering IPv6_Reporting DBGs... Registering IPv6_DB DBGs... Registering EDM DBGs... Registering ENGAGE_TUNABLES DBGs... Registering SUB_CONTEXT DBGs... Registering ENGAGE_API DBGs... Registering VLUR_REPORT DBGs... Registering NUR DBGs... Registering SUR DBGs... Registering PARTY_PERIODIC_REPORTING DBGs... Registering REPORTING_API DBGs... Registering QE DBGs... Registering CcPeriodicAggregatedRecords DBGs... Registering REPORT_AGG_SUBTASK DBGs... Registering ReportAggregationManager DBGs... Registering ENGAGE_REPORT_AGG_LISTENER DBGs... Registering ENGAGE_INIT_STUFF DBGs... Registering RDR_RATE_CONTROL DBGs... Registering PERIODIC_REPORTING DBGs... Registering ENGAGE_REPOTING_DB DBGs... Registering EngageDb DBGs... Registering AppModules DBGs... Registering LcTestApplicationLoader DBGs... Registering TimeBasedHandlers DBGs... Registering OSFingerPrintLC DBGs... Registering MCM DBGs... Registering ManagementVariables DBGs... Registering LineCard DBGs... Message status cannot be set to "ALWAYS ON" DBG_RTSetMsgPeriod: Message number 14 is larger then maximum -1 for module 0xc01 Registering LineCard2 DBGs... Registering LinecardHandlers DBGs... Registering VSA_RDR_LISTENER DBGs... Registering VSA DBGs... Registering ControlCard DBGs... Message status cannot be set to "ALWAYS ON" Registering PartyLogoutAging DBGs... Registering PartyDynamicStateManager DBGs... Registering OSFingerPrint DBGs... Registering CcAppVariableStorageManager DBGs... Registering ControlCardHandlers DBGs... Registering Reporting DBGs... Registering ReaderFileSystem DBGs... Registering SeCommon DBGs... Registering HandlerDeclaration DBGs... Registering Common DBGs... DBG Rate control restored to normal state. Setting the cascade ports definitions: 2 2 3 3 2 2 3 3 (crossed connected) BootLog: Creature 'ControlCardInit' started. Spawning ControlMain task... **************************************************************************************** * * Starting boot process of Cisco SCE8000 Control Card - OS Version 5.2.0 Build 112. * **************************************************************************************** Not setting Control-Card affinity. Beginning Version 5.2.0 Build 112, SCE8000 Version 5.2.0 Build 112. PartyDBManager::getMemorySize() called: numPIDs=1012000, partyEfficiencyFactor=400, numIpEntries=800000, ipEfficiencyFactor=400, numRangeEntries=200000, radixEfficiencyFactor=200, maxVpnId=8000, numUnmappedRanges=5000, numUnmappedIpv6Ranges=1000, numUnmappedTunnels=0, Returning 142669680+170727780+946928+192632=314537020. number 0f extra address space =0 and 128bit ip address table entries = 100000 shell_runner(): beginning shell. shell_runner(): Initializing minishell server on port 78 (78 + 0). Starting minishell server on port 78. Minishell server started OK. SCOS shell started for the first time SCOS shell was created - task ID = -1867463520 BootLog: Creature 'LineCardInit' started. Spawning RucMain task... Spawning redundancyManagerTask task... Setting Master RUC affinity to core 1... Process affinity succesffuly set to cpu 1. Setting Master RUC affinity returned 0... Line card watchdog initialized Starting Memory Monitoring Task Rpc client server already created Init only link and task MsgHndlr: Registering RUC server interfaces... I'm a Master In RucEmergencies::initEmergencies In RucEmergencies::initEmergencies theEmergencyMessanger = 0x12f93d40, message queue id = 20 In RucEmergencyMessenger::createReceiverCommon Initializing traverser Watchdog, TWD Status = 1 (0=disabled, 1=enabled), LogOnly Status = 0, sampling interval(uSec)=5000 sampling timeout(miliSec)=20000 Ruc_Init():Number Of Assembled ports 4, Number Of Supported ports 2 Port topology is set for Full port configuration - Single box ether_spa_family1_10ge_get_serdes_link_status: 0/1/0: ae10gphy_get_link_status failed 8 ether_spa_family1_set_port_enable: 0/1/0: get_enable failed 8 ether_spa_family1_10ge_get_serdes_link_status: 0/0/0: ae10gphy_get_link_status failed 8 ether_spa_family1_set_port_enable: 0/0/0: get_enable failed 8 Platform type is multi CPU CPU type is CPU_CONF_MASTER_ONLY 12 agents detected, FF configured to 12 agents Registering RuC RPC client interfaces... Init remote ip messages Ruc ques are initiliazed Ruc_Init(): Init VAS HW Ruc_Init(): PPC 0 initialized Flow-Capture Recording Rules manager successfully. Ruc_Init(): PPC 0 - no need to initializing Flow-Capture manager. BandwidthMeterTable Created. init hw counters manager Configure Dsr Register for nala Enable(1)/Disable(0): 0 Configure Dsr Register for nala Enable(1)/Disable(0): 1 Configure Dsr Register for nala Extended search - 3 or 64 bit search 1: 1 Configured Simba DP register 0x7a to:0x4 INFO: Waiting for Complex RPC server to finish init... Spawning Reboot Support Task Reboot support task started Checking for duplicate DB variable names... Cli initializing found 2 commands with the same name ingnor this one OS_getFlowTunnelType_IPv6 #total shell commands: 11496 master00->CmdlGenIf: Tables are OK, 1751 funcs found. SANB_iosDevFind(): Device '~/should-not-exist' does not exist. SANB_iosDevFind(): Added device '/apps/data/scos' because device '/apps/data/scos' contains soft-links. ERROR: Failed during execution of 'initVlanInterfaces', error is ''. Host name from boot is 'host_name'. hiddenDir is '/apps/data/scos/system/p3hidden'. systemDir is '/apps/data/scos/system'. IP address is '0.0.0.0', subnet mask is '0.0.0.0'. running script scos_mkdir --clean --dir /apps/data/scos/system/package/ftp , script output: script return val is 0 running script scos_mkdir --clean --dir /apps/data/scos/system/package/extract , script output: script return val is 0 Watchdog task spawned - task name: tCCWatchdog SysWatchdog scos-watchdog-monitor was disabled SysWatchdog scos-watchdog-monitor was enabled Boot Time Watchdog ended after 76 seconds Time updated according to RTC on master. Control ques are initiliazed Rpc client server already created Init only link and task Registering control internal RPC server interfaces... Done registering internal control RPC server interfaces. Registering control external RPC server interfaces... Done registering external control RPC server interfaces. LCH: Spawning qReader tasks... Not setting Formatter affinity. CooperativeSchedulerBase::runScheduler - Starting to run. Scheduler name is FormatterTaskScheduler Waiting for line card to respond to RPC requests... Finished waiting. Registering control RPC client interfaces... Registering control RPC client riReportAggregationConfChange_c. Registering control RPC client RiReportAggregation_c. Registering control RPC client riHwSanityCheck_c. Registering control RPC client RiGetHwParamsControlToMaster_c. Registering control RPC client riGetHwParamsControlToControlAgent_c. Registering control RPC client RiSetIPv6HwConfig_c. AttackFilterIntReal::initRpcClients(): Running. Done registering RuC RPC clients. Calling init functions that uses RPC... Done calling all init functions that uses RPC... INFO: Done waiting for Complex RPC server (10 sec) Scheduler component CommonSlaveSubtasksTable is not being registered Scheduler component SimbaSlavesSubtasks is not being registered URL Normalization global enabler initialized - default value is Disabled. Finished initializing RUC Scheduler Line card initialization complete. BootLog: Creature 'LineCardInit' finished. CooperativeSchedulerBase::runScheduler - Starting to run. Scheduler name is RucMain Registering control RPC client RiSetIPv6TunnelConfig_c. Registering control RPC client RiSetIPv6TunnelDSConfigComplex_c. Registering control RPC client RiSetNativeDualModeConfigComplex_c. Registering control RPC client riLineCardComplexComplex_toMaster. Registering control RPC client riLineCardComplexComplex_toSlaves. Registering control RPC client RiTesting12_ext_c. Registering control RPC client RiTesting12_int_c. Registering control RPC client riAcls. Registering control RPC client RiCamConfigure_c. Registering control RPC client RiNalaMipSeConfigure_c. Registering control RPC client RiNalaMipSeConfigureComplex_c. Registering control RPC client riVas_Complex. Registering control RPC client riVasCcToMasterGet_Complex. Registering control RPC client riVasCcToSuperMasterGet. Registering control RPC client RiTunnelingManagerControlToTp_c. Registering control RPC client RiReportDeclarationsGet_c. Registering control RPC client RiReportDeclarationsConfig_c. Registering control RPC client RiLineCardCcToMaster_c. Registering control RPC client RiLineCardConfigure_c. Registering control RPC client RiCcToPortManagerGet_c. Registering control RPC client RiCcToPortManagerComplex_c. Registering control RPC client riCcWatchdog_c. Registering control RPC client RiLineCardMain_c. Registering control RPC client riContToContAgentSync_c. Registering control RPC client RiL7Filter_c. Registering control RPC client riSanityChecksToControl_c. Registering control RPC client riStatsToControlAgent_c. Registering control RPC client riControlToControlAgentUpdateStatus_c. Registering control RPC client RiReportDeclarations_c. Registering control RPC client RiLineCardCountersCcToMaster_c. Registering control RPC client RiLineCardCountersCcToSuperMaster_c. Registering control RPC client RiCcToPortManagerConfigure. Registering control RPC client RiLineCardCountersCcToMasterComplex_c. Registering control RPC client riPartyControlToTp. Registering control RPC client riPartyConfiguration. Registering control RPC client riPartyLingerConfig. Registering control RPC client riTunableUpdater. Registering control RPC client riTunableGetter. Registering control RPC client TunableDeclarations. Registering control RPC client RiManagementVariables_c. Registering control RPC client riTrafficControl. Registering control RPC client RiMacMappingSimple. Registering control RPC client RiSignatureIDHistogram_c. Registering control RPC client RiDynHwCounter_c. Registering control RPC client RiDynLogMsgs_c. Registering control RPC client RiClsRateCounters_c. Registering control RPC client RiAppStatsRegistry_c. Registering control RPC client RiFlowFilterConfig_c. Registering control RPC client RiFlowFilterGet_c. Registering control RPC client RiFlowFilterToRucs_c. Registering control RPC client RiHandlerInvocation_c. Registering control RPC client RiHandlerDeclarations_c. Registering control RPC client RiFlowCaptureMasterSimple. Registering control RPC client RiFlowCaptureTpSimple. Registering control RPC client RiComponentsSimple. Registering control RPC client LowPriorityFuncWithIoRedirectionManager::riSlaveConditionalDelay. Registering control RPC client riTunneling_c. Registering control RPC client RiTosMarking_c. Registering control RPC client RiApplicationConfigure_c. Registering control RPC client RiApplicationCcToMasterComplexMulti_c. Registering control RPC client RiApplicationCcToMasterComplexMany_c. Registering control RPC client RiTssConfigure_c. Registering control RPC client RiApplicationCcToMaster_c. Registering control RPC client RiApplicationToAnyRuC_c. Registering control RPC client RiSanityChecksMasterComplex_c. Registering control RPC client RiSanityChecksMaster_c. Registering control RPC client RiSanityChecksSuperMaster_c. Registering control RPC client RiSanityChecksToAllRucs_c. Registering control RPC client riSanityCheckAttackControlToMasterConfigure. Registering control RPC client riSanityCheckAttackControlToMastersGet_c. Registering control RPC client riPerfTuning_c. Registering control RPC client riPerfTuningFullComplex_c. Registering control RPC client riPerfTuningGetData_SimpleToTPs_c. Registering control RPC client riOSFingerPrintConfig. Registering control RPC client riLutConfiguration_c. Registering control RPC client riMacResolverToAllRucs. Registering control RPC client RiMacResolverSimple. Registering control RPC client RiRedundancyManager_c. Registering control RPC client RiLinkBypassManagerComplex_c. Registering control RPC client RiLinkBypassManagerSimple_c. Registering control RPC client ExternalBypassWireTest_c. Registering control RPC client riConfigureSlaves_c. Registering control RPC client RiExceptionConfig_c. Registering control RPC client RiExceptionConfigGet_c. Registering control RPC client RiHandlers_c. Registering control RPC client riDebugVertical_c. Registering control RPC client riDebug_SimpleToRUCs_c. Registering control RPC client RiLineCardCountersConfigure_c. Registering control RPC client RiLineCardCountersCcToAnyRuc_c. Registering control RPC client RiLineCardV6CountersCcToAnyTp_c. Registering control RPC client RiTopPorts_c. Registering control RPC client RiClock_c. Registering control RPC client RiLongTermWatchdog_c. Registering control RPC client RiLcWatchdogs_c. Registering control RPC client RiLcWatchdogsMany_c. Registering control RPC client RiStatsLogInfo_c. Registering control RPC client RiLcWatchdogsComplex_c. Registering control RPC client RiIpConfigure_c. Registering control RPC client RiApplicationConfigureComplex_c. Registering control RPC client riStatsLogControlToAllRucSimple. Registering control RPC client riStatsLogControlToMasterComplex. Registering control RPC client RiHwConfigure_c. Registering control RPC client RiHwGet_c. Registering control RPC client RiTcpUdpIpConfig_c. Registering control RPC client RiInfoFromSlaves_c. Registering control RPC client RiDelayLogInfo_c. Registering control RPC client RiConfigureSimulation_c. Registering control RPC client RiClsConfigureCcToMaster_c. Registering control RPC client RiClsGetCcToMaster_c. Registering control RPC client riGetVersionControlToMasters_c. Registering control RPC client RiHostsConfig_c. Registering control RPC client RiServiceLossMonitor_c. Registering control RPC client riDebug_SimpleToTPs_CMDL_BOX_c. Registering control RPC client RiEnableTextualFlowDump_c. Registering control RPC client RiSetSalt_c. Registering control RPC client riAttackConfiguration. Registering control RPC client riAttackControlToMaster_Complex. Registering control RPC client riAttackControlToMaster_Simple. Registering control RPC client riCdpProtocolTrPorts_c. Done registering control RPC clients. Waiting for line-card to finish initializing... Finished waiting. sending IP to LC : 0x0 -= Adding Ports =- Adding port GigabitEthernet1/1 Adding port GigabitEthernet1/2 Adding port TenGigabitEthernet3/0/0 Adding port TenGigabitEthernet3/1/0 Synchronizing the Line-Card Information LcManager(slot=0): CC port managers initialized LcManager(slot=0): Topology information retrieved from line card LcManager(slot=0): link and port information retrieved from line card LcManager(slot=0): Link mode information retrieved from line card LcManager(slot=0): num of supported external bypass devices 2 retrieved from line card LcManager(slot=0): info of all external bypass devices retrieved from line card Initializing Control-Card FTP client... FTP manager init succeded - local cached dir /apps/var/scos/ftp/ Time updated according to RTC. VAS manager initated. Calling PartyDBManager::init()... PartyDBManager::init(): control party memory size is 314537216 bytes. PartyDBManager::init(): addrMemorySize=142669680, partyDbMemorySize=170727780, unmappedPartyDBMemorySize=946928 umIpv6PartyMemorySize=192632. PartyDBManager::init(): wasted 196 bytes out of 314537216 bytes allocated to control party memory. PartyDBManager::init() OK. um-agent classpath file '/pkg/um-agent/classpth.txt' found. Read 142 bytes JVM classpath (um part): '/xcore.jar:/um_core.jar:/xjars.jar:/jdmk.jar:/antlr.jar:/xerces.jar:/regexp.jar:/log4j.jar:/asn1rt.jar:/xmlpapi.jar:/jce_bc.jar:/jmxri.jar:/ '. JVM classpath: '/pkg/scos/um/perclib.jar:/pkg/scos/um/perctool.jar:/pkg/scos/um/gcp.jar:/pkg/scos/um/xmlapis.jar:/pkg/scos/um/xrcsimpl.jar:/pkg/um-agent/xcore.jar:/pkg/um-agent/um_core.jar:/pkg/um-agent/xjars.jar:/pkg/um-agent/jdmk.jar:/pkg/um-agent/antlr.jar:/pkg/um-agent/xerces.jar:/pkg/um-agent/regexp.jar:/pkg/um-agent/log4j.jar:/pkg/um-agent/asn1rt.jar:/pkg/um-agent/xmlpapi.jar:/pkg/um-agent/jce_bc.jar:/pkg/um-agent/jmxri.jar:/pkg/um-agent/ '. Control to LineCard communication established starting watchdog dynamic stat sync with LineCard CLI initialization started Registered 225 out of 264 CLI trees, found 0 trees with problems. CLI initialization finished successfully init SNMP module SNMP configuration dir - /apps/data/net-snmp SNMP working dir - /pkg/scos SNMP log dir - /apps/var/net-snmp SNMP - Trap init succeded SNMP agentx start succeded SNMP - agentx init succeded SNMP - agent init succeded SNMP - show mib init succeded SNMP - entity mib init succeded SNMP - cisco service control subscriber MIB init succeded SNMP cisco service control TP stats mib init succeded Spawning SNMP main tasks... Calling pre java confing, original file is /apps/data/scos/system/config.txt, pre file name is /apps/data/scos/system/p3hidden/config/prejava.txt Creating temp config pre-java file... Created pre-java config file with 15 lines. Executing /apps/data/scos/system/p3hidden/config/prejava.txt: Beginning execution of temp pre-java configuration file. TimeStamp:89. interface LineCard 0 interface GigabitEthernet 1/1 ip address 192.168.100.100 255.255.255.0 interface GigabitEthernet 1/2 ip address 192.168.100.100 255.255.255.0 interface TenGigabitEthernet 3/0/0 interface TenGigabitEthernet 3/1/0 exit ip default-gateway 192.168.100.1 line vty 0 4 exit interface Mng 0/1 exit interface Mng 0/2 exit Finished execution of temp pre-java configuration file. TimeStamp:90. Finished with 15 commands performed successfully and 0 had problems. Initializing JNI functions, wrappers for 16-byte stack alignment used. Launching the JVM... Setting JVM affinity to core 0... Process affinity succesffuly set to cpu 0. Setting JVM affinity returned 0... Loading /pkg/scos/um/libpvm.so .Remote output negotiation with cc successful. Remote fd is -1, max message size is 16 init Remote output device successfully. device name /rucRpc/. added entity to /rucRpc/ successfully. entity name: control . ..JVM entry point func is perc JVM print back trace func is dumpThreads --------------------------------------------------- --- launch JVM -- --------------------------------------------------- javaString = -nojit -no-gdb -no-preempt-boost -no-sigquit-handler -regsize 1m -num-regions 45 -maxmem 45m -cs 100000 -classpath /pkg/scos/um/perclib.jar:/pkg/scos/um/perctool.jar:/pkg/scos/um/gcp.jar:/pkg/scos/um/xmlapis.jar:/pkg/scos/um/xrcsimpl.jar:/pkg/um-agent/xcore.jar:/pkg/um-agent/um_core.jar:/pkg/um-agent/xjars.jar:/pkg/um-agent/jdmk.jar:/pkg/um-agent/antlr.jar:/pkg/um-agent/xerces.jar:/pkg/um-agent/regexp.jar:/pkg/um-agent/log4j.jar:/pkg/um-agent/asn1rt.jar:/pkg/um-agent/xmlpapi.jar:/pkg/um-agent/jce_bc.jar:/pkg/um-agent/jmxri.jar:/pkg/um-agent/ -Dse.root=/apps/data/scos/ -Dsce.data.root=/apps/data/scos/ -Dsce.code.root=/pkg/scos -Dmng_agent.code.root=/pkg/um-agent -Dmng_agent.installs.root=/apps/const/scos/um-installs -Djava.security.manager -Djava.security.policy=/pkg/um-agent/config/security.pol StartSE argc = 22 argv[0] = -nojit argv[1] = -no-gdb argv[2] = -no-preempt-boost argv[3] = -no-sigquit-handler argv[4] = -regsize argv[5] = 1m argv[6] = -num-regions argv[7] = 45 argv[8] = -maxmem argv[9] = 45m argv[10] = -cs argv[11] = 100000 argv[12] = -classpath argv[13] = /pkg/scos/um/perclib.jar:/pkg/scos/um/perctool.jar:/pkg/scos/um/gcp.jar:/pkg/scos/um/xmlapis.jar:/pkg/scos/um/xrcsimpl.jar:/pkg/um-agent/xcore.jar:/pkg/um-agent/um_core.jar:/pkg/um-agent/xjars.jar:/pkg/um-agent/jdmk.jar:/pkg/um-agent/antlr.jar:/pkg/um-agent/xerces.jar:/pkg/um-agent/regexp.jar:/pkg/um-agent/log4j.jar:/pkg/um-agent/asn1rt.jar:/pkg/um-agent/xmlpapi.jar:/pkg/um-agent/jce_bc.jar:/pkg/um-agent/jmxri.jar:/pkg/um-agent/ argv[14] = -Dse.root=/apps/data/scos/ argv[15] = -Dsce.data.root=/apps/data/scos/ argv[16] = -Dsce.code.root=/pkg/scos argv[17] = -Dmng_agent.code.root=/pkg/um-agent argv[18] = -Dmng_agent.installs.root=/apps/const/scos/um-installs argv[19] = -Djava.security.manager argv[20] = -Djava.security.policy=/pkg/um-agent/config/security.pol argv[21] = StartSE *************** loading EM-AGENT=5.2.0 Build 16************* -- SE_ROOT_DIR=/apps/data/scos/ -- java.library.path=/pkg/scos:/pkg/scos/um:/pkg/net-snmp/lib:/pkg/p0f-tool/lib: -- main start OS=Linux -- about to setup the logger - Cleaning obsolete files - about to load MBeans -- starting network entity agent main -- finished initiating log4j, before parsing JDMK trace properties -- finished parsing JDMK trace properties, before checking whether do display -- before handling states directory -- about to startup agent -- starting to load MBeans -- after first debug message -- constructed new network entity agent, about to load MBeans -- adding default MBeans -- loading Framework:name=Loader -- loading Framework:name=FileManager -- defaultPath /apps/data/scos/system/p3hidden/um/ -- codePath /pkg/um-agent -- loading Framework:name=AgentDelegate -- loading Framework:name=UserManager -- adding MBean config entries -- loading Framework:name=Security -- loading Interfaces:name=HtmlAdaptorServer -- loading Logger:name=Log4j -- loading SE:name=NativeFunctionality .......WARNING - Short term WD timer was expired while the WD is disable HWSRV_NIC_LinkBypass::Enabling Long & Short term WD! CALLING LIC WD FOR THE FIRST TIME AT TIME = 100784 Before HWSRV_NIC_Basic::SyncWithLic() SYNC WITH LIC DONE AT TIME = 100784 .... Loading perc native.o setupNotificationPolling() called: queue number=2. setupNotificationPolling() called: queue number=1. setupNotificationPolling() called: queue number=3. -- loading Utilities:name=NotificationListener -- loading SE:name=SEAbstraction -- loading Time:name=SystemTime -- loading Interfaces:name=FTPServer -- loading SE:name=DatedTuneableChangerMBean -- loading SE:name=SmmAgent -- loading Utilities:name=AdvertisingMBean -- loading Install:name=InstallExecutor -- loading Interfaces:name=RPC -- loading SE:name=Cli -- loading SMM:name=SSUMBean -- loading SE:name=PercMBean -- loading RDR:name=RDRServerMBean -- loading SMM:name=ExternalPull -- loading Framework:name=Statistics -- loading SMM:name=SCESubscriberApi -- loading LEG:name=LeaseQueryLEG -- loading Engage:name=SEEngageMBean -- calling postStart for default MBeans -- post start Framework:name=Loader -- post start Framework:name=FileManager -- post start Framework:name=AgentDelegate -- post start Framework:name=UserManager -- post start Framework:name=Scheduler -- calling validate for all MBeans -- calling start for all(non-default) MBeans -- start Framework:name=Security -- start Interfaces:name=HtmlAdaptorServer -- start Logger:name=Log4j -- start SE:name=NativeFunctionality -- start Utilities:name=NotificationListener -- start SE:name=SEAbstraction -- start Time:name=SystemTime -- start Interfaces:name=FTPServer -- start SE:name=DatedTuneableChangerMBean -- start SE:name=SmmAgent -- start Utilities:name=AdvertisingMBean -- start Install:name=InstallExecutor -- start Interfaces:name=RPC -- start SE:name=Cli -- start SMM:name=SSUMBean -- start SE:name=PercMBean -- start RDR:name=RDRServerMBean -- start SMM:name=ExternalPull -- start Framework:name=Statistics -- start SMM:name=SCESubscriberApi -- start LEG:name=LeaseQueryLEG -- start Engage:name=SEEngageMBean -- calling postStart for all(non-default) MBeans -- post start Framework:name=Security -- post start Interfaces:name=HtmlAdaptorServer -- post start Logger:name=Log4j -- post start SE:name=NativeFunctionality -- post start Utilities:name=NotificationListener -- post start SE:name=SEAbstraction -- post start Time:name=SystemTime -- post start Interfaces:name=FTPServer -- post start SE:name=DatedTuneableChangerMBean -- post start SE:name=SmmAgent -- post start Utilities:name=AdvertisingMBean -- post start Install:name=InstallExecutor -- post start Interfaces:name=RPC -- post start SE:name=Cli -- post start SMM:name=SSUMBean -- post start SE:name=PercMBean -- post start RDR:name=RDRServerMBean -- post start SMM:name=ExternalPull -- post start Framework:name=Statistics -- post start SMM:name=SCESubscriberApi -- post start LEG:name=LeaseQueryLEG -- post start Engage:name=SEEngageMBean -- calling post all register for all MBeans -- post-all-register Framework:name=Loader -- post-all-register Framework:name=FileManager -- post-all-register Framework:name=AgentDelegate -- post-all-register Framework:name=UserManager -- post-all-register Framework:name=Scheduler -- post-all-register Framework:name=Security -- post-all-register Interfaces:name=HtmlAdaptorServer -- post-all-register Logger:name=Log4j -- post-all-register SE:name=NativeFunctionality -- post-all-register Utilities:name=NotificationListener -- post-all-register SE:name=SEAbstraction -- post-all-register Time:name=SystemTime -- post-all-register Interfaces:name=FTPServer -- post-all-register SE:name=DatedTuneableChangerMBean -- post-all-register SE:name=SmmAgent -- post-all-register Utilities:name=AdvertisingMBean -- post-all-register Install:name=InstallExecutor -- post-all-register Interfaces:name=RPC -- post-all-register SE:name=Cli -- post-all-register SMM:name=SSUMBean -- post-all-register SE:name=PercMBean -- post-all-register RDR:name=RDRServerMBean -- post-all-register SMM:name=ExternalPull -- post-all-register Framework:name=Statistics -- post-all-register SMM:name=SCESubscriberApi -- post-all-register LEG:name=LeaseQueryLEG -- post-all-register Engage:name=SEEngageMBean -- calling apply for all MBeans -- calling post-all-apply for all MBeans -- calling general config validation -- about to leave startup mbeans procedure -- all mbeans are loaded -- mbeans configuration is loaded ........... JVM launched OK. Executing configuration files, boot log stored in '/apps/data/scos/system/bootlog.txt'. Executing /apps/data/scos/system/config.txt: Beginning execution of general configuration file. TimeStamp:115. SNMP Server was started -- startup agent complete -- console shutdown is disabled Please note: text is not logged into the bootlog file, and not output to shell, due to space and time considerations. Finished execution of general configuration file. TimeStamp:133. Finished with 44 commands performed successfully and 0 had problems. No Protected general config files found. Loading party database from backup. TimeStamp:133. Done loading party and mappings database. TimeStamp:133. Executing /apps/data/scos/system/p3hidden/config/applcfg.txt: Beginning execution of application configuration file. TimeStamp:133. Please note: text is not logged into the bootlog file, and not output to shell, due to space and time considerations. Finished execution of application configuration file. TimeStamp:311. Finished with 29200 commands performed successfully and 0 had problems. No Protected application config files found. Loading party tunables database from backup. TimeStamp:311. Done loading party tunables database. TimeStamp:311. Activating Generic SCOS RPC server. TimeStamp:313. Activating telnet server. TimeStamp:313. Starting Internal Cli Server on port 2222 for use by Telnet. Starting telnetServer server on port 2222... Internal Cli Server started. Telnet Server started OK. Activating SSH server. TimeStamp:313. Starting sshServer server on port 2223... Internal Cli Server started on port 2223 for use by SSH. Service guard init Running telnetd guard thread Running sshd guard thread Running ntpd guard thread Activating SNMP server. TimeStamp:314. Running ntpd last update time monitor thread Activating CLI Console. TimeStamp:314. Serial CLI console started on device '/dev/ttyS1'. BootLog: Creature 'ControlCardInit' finished. BootLog: Boot process finished, stopping redirection of stdout and stderr to BootLog file. Finished boot. TimeStamp:314. ***************************************************************** * * Welcome to SCE8000 Version 5.2.0 Build 112. * ***************************************************************** SCE8000 login: