RTMCMD creates MRTG configuration and report CGI files to be used with 
MRTG/RRDTool for SNMP-based real time monitoring of the SCE platform 
and SCA BB.
The utility makes use of a template engine to compile the templates and the 
Service Configuration into the actual configuration and report files,
and stores the results in the specified target directory.

Usage:  rtmcmd [MODIFIERS]

Modifiers:
  -S, --sce=ADDRESS1[;ADDRESS2;...] (Required) The IP ADDRESS(es) of the 
                                               SCE(s) from which SNMP data
                                               is collected. Unix users must
                                               use quotes when specifying
                                               multiple SCE addresses.
  -s, --source-dir=DIR              (Required) Template files location
  -d, --dest-dir=DIR                (Required) Target directory
  -f, --file=FILE                   (Optional) The Service Configuration FILE
                                               to use
  -q, --pqb-sce=ADDRESS             (Optional) The SCE IP from which Service
                                               Configuration should be
                                               retrieved, in case a PQB file
                                               was not specified
  -U, --username=USERNAME           (Optional) The USERNAME for connecting
                                               the SCE to retrieve the
                                               Service Configuration
  -P, --password=PASSWORD           (Optional) The PASSWORD for connecting
                                               the SCE to retrieve the
                                               Service Configuration 
  -c, --config-file=FILE            (Required) The user configuration file
  

Informative output:
      --help            print this help, then exit
      --version         print program version number, then exit


Examples:

  RTMCMD --sce="63.111.106.7;63.111.106.12" --file=servicecfg.pqb 
         --source-dir=/rtm-templates --dest-dir=/rtm-output
         -c ./rtmcmd.cfg

    Create report and config files for the specified SCE platforms.
    Load the Service Configuration file from a local file.
    
  RTMCMD -S "63.111.106.7;63.111.106.12" -U user123 -P ****
    --pqb-sce=63.111.106.7 --source-dir=/rtm-templates --dest-dir=/rtm-output
    -c ./rtmcmd.cfg
    
     Create report and config files for the specified SCE platforms.
     Retrieve a Service Configuration file from the specified SCE.
