![[Contents]](figure/content.gif)
![[Glossary]](figure/gloss.gif)
![[Index]](figure/index.gif)
![[Back]](figure/front.gif)
![[Next]](figure/after.gif)
HiCommand Dynamic Link Manager User's Guide (for Windows(R))
When you use the intermittent error functionality, you can enable or disable the functionality. If you enable the functionality, specify the monitoring conditions: the error monitoring interval, and the number of times that the error is to occur. If an error occurs in a path the specified number of times within the specified error monitoring interval, the system determines that the path has an intermittent error. For example, if you specify 30 for the error monitoring interval and 3 for the number of times that the error is to occur, the path is determined to have an intermittent error if an error occurs 3 or more times in 30 minutes.
You can set up intermittent error monitoring by executing the dlnkmgr command's set operation or using the Options window of the HDLM GUI.
Intermittent error monitoring can be used only when automatic failback is enabled. The setting value depends on the setting value for automatic failback. For details on how to set up the setting values, see 7.6 set (Sets the operating environment) or 6.3 Options window.
All Rights Reserved. Copyright (C) 2003, 2007, Hitachi, Ltd.