HiCommand Dynamic Link Manager User's Guide (for Windows(R))

3.4.2 Notes on storage subsystems

• You must not change the vendor ID and product ID of the storage subsystem. If you change these IDs, HDLM cannot recognize the storage subsystem.
• For a configuration in which the host and the storage subsystem are connected by using a Fibre Channel switch, select Point To Point as the connection type. If you select FC-AL (Fibre Channel Arbitrated Loop) as the connection type, an unexpected path error may be detected.
• Windows can recognize LUNs from 0 to 255. Therefore, set LUNs in the range from 0 to 255 in the storage subsystem management software.

[Contents][Back][Next]

All Rights Reserved. Copyright (C) 2003, 2007, Hitachi, Ltd.