![[Contents]](figure/content.gif)
![[Glossary]](figure/gloss.gif)
![[Index]](figure/index.gif)
![[Back]](figure/front.gif)
![[Next]](figure/after.gif)
HiCommand Dynamic Link Manager User's Guide (for Windows(R))
- Only HDLM version 5.7 or later can manage the EMC DMX series or EMC CX series. For HDLM versions earlier than 5.7, see 3.5.4 Upgrade installation or re-installation of HDLM and then perform an update installation.
- Only HDLM version 5.9.1 or later can manage the HP EVA series. For HDLM versions earlier than 5.9.1, see 3.5.4 Upgrade installation or re-installation of HDLM and then perform an update installation.
- You can display and operate the HDLM GUI windows for the Thunder 9200/9500V series, Lightning 9900/9900V series TagmaStore, and Universal Storage Platform V. If you specify the EMC DMX series, EMC CX series, or HP EVA series as an HDLM management-target device, use HDLM commands to display information and set the operating environment. For details about each command, see 7. Command Reference.
- When using EMC CX Series, connect only one port of the storage to the switch in a single-path configuration and connect the switch to the server in a multi-path configuration.
All Rights Reserved. Copyright (C) 2003, 2007, Hitachi, Ltd.