HiCommand Dynamic Link Manager User's Guide (for Windows(R))

4.3.10 Viewing HDLM component information

This subsection explains how to display HDLM component information.

To display HDLM component information, execute the dlnkmgr command's view operation with the -sys parameter specified. The following shows an example in which the command is executed:
>dlnkmgr view -sys
HDLM Version                 : xx-xx
Service Pack Version         : 
Load Balance                 : on(rr)
Support Cluster              : off
Elog Level                   : 3
Elog File Size (KB)          : 9900
Number Of Elog Files         : 2
Trace Level                  : 0
Trace File Size(KB)          : 1000
Number Of Trace Files        : 4
Path Health Checking         : on(30)
Auto Failback                : off
Remove LU                    : on
Intermittent Error Monitor   : off
HDLM Manager Ver      WakeupTime
Alive        xx-xx    yyyy/mm/dd hh:mm:ss
HDLM Alert Driver Ver      WakeupTime          ElogMem Size
Alive             xx-xx    yyyy/mm/dd hh:mm:ss 128
HDLM Driver Ver      WakeupTime
Alive       xx-xx    yyyy/mm/dd hh:mm:ss
License Type Expiration
Permanent    -
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = yyyy/mm/dd hh:mm:ss
>
Among the displayed items, HDLM Manager, HDLM Alert Driver, and HDLM Driver indicate the HDLM component information.

Also, you can view information for each HDLM component. Execute the dlnkmgr command's view operation with the -sys and subsequent parameter specified. The following shows an example in which the command is executed:
>dlnkmgr view -sys -msrv
>dlnkmgr view -sys -adrv
>dlnkmgr view -sys -pdrv

[Contents][Back][Next]

[Trademarks]