HiCommand Dynamic Link Manager User's Guide (for Windows(R))

4.5.1 Starting the HDLM manager

During installation, the HDLM manager is registered as a Windows service and the startup type is set to Automatic. This means that when Windows starts, the HDLM manager also starts automatically.

If, for some reason, the HDLM manager has not started, start it as follows:

Log on to Windows as a member of the Administrators group. In Control Panel, choose Administrative Tools and then Services. From the list of services, double-click DLMManager, and then click the Start button.

Use one of the following procedures to confirm that the HDLM manager is active:
When using the dlnkmgr command's view operation:

Execute the following command:
 
>dlnkmgr view -sys -msrv
HDLM Manager Ver      WakeupTime
Alive        xx-xx    yyyy/mm/dd hh:mm:ss
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = yyyy/mm/dd hh:mm:ss
>
 
When the HDLM Manager column shows Alive, the HDLM manager is active.
When using the Options window of the HDLM GUI:

When using the HDLM GUI, click the Component Information button of Options window to display the HDLM Component information dialog box. If the Status of HDLM manager shows Alive, the HDLM manager is active.

[Contents][Back][Next]

[Trademarks]