HiCommand Dynamic Link Manager User's Guide (for Windows(R))

8.5.2 Parameters

-singleconnect

Checks whether a single path connects the HDLM management-target LU and the host.
Examples

In the following example, the utility determines that the system is in a single-path configuration:
 
>dlmchkpath -singleconnect
KAPL12401-I All LUs managed by HDLM are in a single path configuration.
 
In the following example, the utility determines that the system is in a multi-path configuration:
 
>dlmchkpath -singleconnect
KAPL12402-W iLU(0100) is in a multi-path configuration. PathID = 0,3
KAPL12402-W iLU(0101) is in a multi-path configuration. PathID = 1,4
KAPL12402-W iLU(0102) is in a multi-path configuration. PathID = 5,2
 
In the following example, the view operation is performed when the utility determines that the system is in a multi-path configuration. For details about the view operation, see 7.7 view (Displays information).
 
>dlnkmgr view -path -c
Paths:000006 OnlinePaths:000006
PathStatus   IO-Count    IO-Errors
Online         152579       30
 
PathID DskName                              iLU              CP Status     Type
000000 HITACHI .DF600F    .5455        0100            0C Online     Own
000001 HITACHI .DF600F    .5455        0101            0C Online     Own
000002 HITACHI .DF600F    .5455        0102            0C Online     Non
000003 HITACHI .DF600F    .5455        0100            1C Online     Non
000004 HITACHI .DF600F    .5455        0101            1C Online     Non
000005 HITACHI .DF600F    .5455        0102            1C Online     Own
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = yyyy/mm/dd hh:mm:ss
-h

Displays the Help for the dlmchkpath utility.

None

Displays an alert message.

[Contents][Back][Next]

[Trademarks]