HiCommand Dynamic Link Manager User's Guide (for Windows(R))

[Contents][Glossary][Index][Back][Next]

9.3 HDLM GUI messages

KAPL02001-I

HDLM GUI has started normally.

Action
None.

KAPL02002-I

HDLM GUI has terminated.

Action
None.

KAPL02003-E

You lack permission to start HDLM GUI.

Action
Execute the command as a user with Administrators group privileges.

KAPL02004-E

An error occurred during internal processing of HDLM GUI. HDLM GUI cannot start. Details = aa...aa

Details
During GUI startup, an error that might not be caused by a user operation occurred.
aa...aa: Failed API name:
  • JHSPGetPathBy
  • JHSPGetManagerStatus
  • JHSPGetDriverStatus
  • JHSPGetADriverStatus
  • JHSPVerifyAuthorization

Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see 8.2 DLMgetras (utility for collecting HDLM error information).

KAPL02005-E

An attempt to start HDLM GUI has failed due to insufficient memory.

Details
Sufficient memory to process the HDLM GUI could not be obtained.

Action
Terminate unnecessary applications to increase the amount of free memory, or restart the host.

KAPL02006-W

No path was detected.

Details
The target path could not found.

Action
Set up a path between the host and storage subsystem, and then restart the host.

KAPL02007-E

The HDLM manager could not be connected. The aa...aa operation has been stopped.

Details
During the Option window startup or Set Option Information operation, the system could not access the HDLM manager.
aa...aa: Get Option Information or Set Option Information

Action
Execute the view operation of the HDLM command (dlnkmgr) to check whether the HDLM manager has started. If the HDLM manager has not started, start the HDLM manager and then restart HDLM GUI. For details on the view operation, see 7.7 view (Displays information).

KAPL02011-I

Would you like to execute the aa...aa operation? [OK/Cancel]

Details
This is confirmation for execution of the operation. If you want to execute the operation, click OK. To cancel the operation, click Cancel.
aa...aa: Clear Data

Action
If you want to execute the operation, click OK. To cancel the operation, click Cancel.

KAPL02012-I

aa...aa has started.

Details
aa...aa: Operation
  • CSV Output
  • Set Option Information
  • Refresh
  • Online
  • Offline
  • Clear Data

Action
None.

KAPL02013-I

aa...aa has completed successfully.

Details
aa...aa: Operation
  • CSV Output
  • Define Option Information
  • Refresh
  • Clear Data

Action
None.

KAPL02014-W

No data has been input in aa...aa.

Details
No value has been entered in the input field of the Option window.
aa...aa: Input item
  • Path Health Checking Interval
  • Auto Failback Checking Interval
  • Error Log File Size
  • Monitoring Interval
  • Number of times
  • Error Log Number of Files
  • Trace File Size
  • Trace Number of Files

Action
Data has not been input for the specified item. See 6.3 Options window to specify a numeric value within the valid range described in this manual.

KAPL02015-W

A value which is not a number has been input in aa...aa.

Details
Non-numeric value has been entered in the input field of the Option window.
aa...aa: Input item
  • Path Health Checking Interval
  • Auto Failback Checking Interval
  • Error Log File Size
  • Monitoring Interval
  • Number of times
  • Error Log Number of Files
  • Trace File Size
  • Trace Number of Files

Action
Specify a numeric value for the specified item.

KAPL02016-W

A value which is outside of the valid range has been input in aa...aa.

Details
The value entered in the input field of the Option window is not within the valid range.
aa...aa: Input item
  • Path Health Checking Interval
  • Auto Failback Checking Interval
  • Error Log File Size
  • Monitoring Interval
  • Number of times
  • Error Log Number of Files
  • Trace File Size
  • Trace Number of Files

Action
For the specified item, specify a numeric value within the valid range described in this manual. See 6.3 Options window to specify a numeric value within the valid range described in this manual.

KAPL02017-I

The currently selected paths will be changed to the Online status. Is this OK? [OK/Cancel]

Details
The currently selected paths will be changed to the Online status. If you want to continue, click OK. If you do not want to proceed, click Cancel.

Action
If you want to execute the online processing, click OK. To cancel the online processing, click Cancel.

KAPL02018-I

Because no path has been selected among the currently displayed paths, the paths in the Offline(C), Offline(E), and Online(E) statuses will be changed to the Online status. Is this OK? [OK/Cancel]

Details
The paths that are not online among the currently displayed paths will be changed to the Online status. If you want to continue, click OK. If you do not want to proceed, click Cancel.

Action
If you want to execute the online processing, click OK. To cancel the online processing, click Cancel.

KAPL02019-I

The currently selected paths will be changed to the Offline(C) status. Is this OK? [OK/Cancel]

Details
The currently selected paths will be changed to the Offline(C) status. If you want to continue, click OK. If you do not want to proceed, click Cancel.

Action
If you want to execute the offline processing, click OK. To cancel the offline processing, click Cancel.

KAPL02020-I

If you are sure that there would be no problem when the path is placed in the Offline(C) status, click OK. Otherwise, click Cancel. [OK/Cancel]

Details
This is confirmation to determine whether you want to change the selected path(s) to Offline(C) status. If you want to continue, click OK. If you do not want to proceed, click Cancel.

Action
If you want to execute the offline processing, click OK. To cancel the offline processing, click Cancel.

KAPL02021-I

aa...aa path(s) were successfully placed bb...bb. cc...cc path(s) could not be placed bb...bb.

Details
The online/offline processing has completed.
aa...aa: Number of paths successfully processed (decimal number)
bb...bb: Online or Offline
cc...cc: Number of failed paths (decimal number)

Action
For the path ID of the path for which the online/offline processing failed, see the operation log.

KAPL02022-W

A path that cannot be placed in the Online status has been detected. PathID = aa...aa Would you like to continue the Online processing? [OK/Cancel]:

Details
While performing online processing of multiple paths, a path that cannot be changed to Online was detected. If you want to ignore the path and continue, click OK. To cancel the operation, click Cancel.
aa...aa: Path ID (decimal number)

Action
If you want to continue online processing, click OK. To cancel online processing, click Cancel. For the paths for which online processing failed, correct the errors, and then re-execute online processing.

KAPL02023-W

A path that cannot be placed in the Offline(C) status has been detected. PathID = aa...aa Would you like to continue the Offline processing? [OK/Cancel]:

Details
During offline processing of multiple paths, a path that cannot be changed to Offline(C) was detected. If you want to ignore the path and continue, click OK. To cancel the operation, click Cancel.
aa...aa: Path ID (decimal number)

Action
If you want to continue the offline processing, click OK. To cancel the offline processing, click Cancel. For paths that cannot be processed, take the following actions.
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see 8.2 DLMgetras (utility for collecting HDLM error information).

KAPL02026-W

The target path of the aa...aa operation could not be found.

Details
The target path of the operation could not be found.
aa...aa: Operation
  • Online
  • Clear Data
  • CSV Output
  • Get Path Information
  • Refresh

Action
Click Refresh to update the view contents, check the path status, and then retry.

KAPL02027-E

The last Online path or Online(E) path to the LU cannot be placed in the Offline(C) status. PathID = aa...aa

Details
The path specified in the offline processing cannot be placed Offline(C) because it is the last path of the LU.
aa...aa: Path ID (decimal number)

Action
Click Refresh to update the view contents, check the path status, and then retry.

KAPL02028-W

You lack write permission for the aa...aa.

Details
You lack write permissions for the specified CSV file.
aa...aa: Output CSV File Name

Action
Check whether you have access permissions for the specified file and whether the specified file name is correct.

KAPL02029-E

An error occurred during internal processing of the HDLM GUI. The aa...aa operation has been stopped. Details = bb...bb

Details
During the GUI processing, an error which might not be caused by a user operation occurred.
aa...aa: Internal Processing Name
  • Get Option Information
  • Set Option Information
  • Online
  • Offline
  • Get Path Information
  • Refresh
  • Clear Data
  • Get HDLM Manager Status
  • Get HDLM Driver Status
  • Get HDLM Alert Driver Status
bb...bb: Issuing API Name
  • JHSPGetOption
  • JHSPSetOption
  • JHSPOnlinePath
  • JHSPOfflinePath
  • JHSPGetPathBy
  • JHSPClearStatistics
  • JHSPGetManagerStatus
  • JHSPGetDriverStatus
  • JHSPGetADriverStatus
  • JHSPGetClusterService

Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see 8.2 DLMgetras (utility for collecting HDLM error information).

KAPL02032-E

The aa...aa operation cannot be executed because the amount of memory is insufficient.

Details
There was not sufficient memory available for the HDLM GUI processing.
aa...aa: Internal processing names
  • CSV Output
  • Online
  • Offline
  • Get Path Information
  • Refresh
  • Clear Data
  • Get Option Information
  • Set Option Information
  • Get HDLM Manager Status
  • Get HDLM Driver Status
  • Get HDLM Alert Driver Status

Action
Terminate unnecessary applications to increase the amount of free memory, or restart the host.

KAPL02033-E

An unexpected error occurred, and the aa...aa operation has been stopped.

Details
An exception occurred during the HDLM GUI processing.
aa...aa: Internal processing names
  • CSV Output
  • Get Path Information
  • Refresh
  • Online
  • Offline
  • Clear Data
  • Get Option Information
  • Set Option Information
  • Get HDLM Manager Status
  • Get HDLM Driver Status
  • Get HDLM Alert Driver Status

Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see 8.2 DLMgetras (utility for collecting HDLM error information).

KAPL02040-E

The Offline(C) path cannot be placed Online. PathID = aa...aa

Details
aa...aa: Path ID (decimal number)

Action
Remove the error in the path, and then retry.

KAPL02041-W

The cluster support function is active, so the load balancing function is not supported.

Details
The load balancing function cannot be enabled because MSCS is installed.

Action
The load balancing function is not supported in an environment where MSCS is installed. If you want to use the load balancing function, uninstall MSCS.

KAPL02042-E

An unexpected error occurred. The HDLM GUI cannot start.

Details
An exception occurred when starting the HDLM GUI.

Action
Execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see 8.2 DLMgetras (utility for collecting HDLM error information).

KAPL02043-E

The target path of the aa...aa operation could not be found. PathID = bb...bb

Details
The target path of the operation could not be found.
aa...aa: Online or Offline
bb...bb: The Path ID to which the operation was attempted (decimal number)

Action
Click Refresh to update the view contents, and then check the path status, and then retry.

KAPL02044-W

aa...aa exists already. Do you want to overwrite it? [OK/Cancel]

Details
The existing file will be overwritten. To continue, click OK. Otherwise, click Cancel.
aa...aa: File name

Action
To overwrite the existing file, click OK. Otherwise, click Cancel.

KAPL02052-W

The HDLM manager could not be connected.

Details
The HDLM manager could not be accessed during the start processing of the HDLM GUI.
aa...aa: Get Option Information or Set Option Information

Action
Execute the view operation of the HDLM command (dlnkmgr) to check whether the HDLM manager has started. If the HDLM manager has not started, start the HDLM manager and then restart HDLM GUI. For details on the view operation, see 7.7 view (Displays information).

KAPL02053-I

Would you like to terminate the HDLM GUI? [OK/Cancel]

Action
If you want to terminate the HDLM GUI, click OK. If you do not want to terminate the HDLM GUI, click Cancel.

KAPL02054-I

aa...aa path(s) were successfully placed Offline(C). The Offline request of bb...bb path(s) were registered. cc...cc path(s) could not be placed Offline(C).

Details
Indicates the number of the processed paths when the offline request was registered during the Reserve processing.
aa...aa: The number of paths that succeeded in the offline processing (decimal number)
bb...bb: The number of paths for which the offline request was registered (decimal number)
cc...cc: The number of paths failed in the offline processing (decimal number)

Action
For the Path ID(s) of the failed path(s), see the operation log. Click Refresh if you want to check the registered path(s) in a batch job.

KAPL02055-I

The target path(s) are already aa...aa.

Details
The specified paths are already Online/Offline(C), resulting from the online/offline processing.
aa...aa: Online or Offline(C)

Action
Click Refresh to check the status of the path.

KAPL02058-E

The configuration does not support the simultaneous use of the load balancing and cluster support functions.

Details
If a storage subsystem for which persistent reserve is not supported exists among the HDLM-managed storage subsystems, the load balancing function cannot be used in the cluster environment.

Action
Make sure that all HDLM-managed storage subsystems support persistent reserve. Contact your storage subsystem vendor or maintenance company to check whether the storage subsystems you are using support persistent reserve.

KAPL02061-W

The getting PathInformation has been stopped because the path configuration was changed during HDLM GUI startup processing.

Details
The path information could not be acquired because the configuration of paths was changed during HDLM GUI startup processing.

Action
Click Refresh after you confirm the reconfiguration of the path is not done.

KAPL02062-E

The Refresh operation has been stopped because the configuration of paths was changed during the processing of the Refresh operation.

Details
The information of the path could not be acquired because the configuration of paths was changed during the processing of the Refresh operation.

Action
Click Refresh after you confirm the reconfiguration of the path is not done.

KAPL02063-W

The version number cannot be displayed.

Details
The version number couldn't be acquired because it failed in reading of a parameter file to start HDLM GUI.

Action
The version number cannot be displayed, but the operation of HDLM GUI can execute. If you want to display the version number, install the HDLM again.

KAPL02064-W

The error monitoring interval and the number of times that the error is to occur conflict with the automatic failback checking interval.

Details
An intermittent error cannot be detected by using the values specified for the following: the checking interval for automatic failback, the error monitoring interval, and the number of times the error is to occur.

Action
Set the intermittent error monitoring interval to a value that is equal to or more than (automatic-failback-checking-interval x number-of-times-error-is-to-occur-for-intermittent-error-monitoring).

KAPL02065-W

The getting PathInformation has been stopped because the configuration of paths was changed during the processing of the getting PathInformation.

Details
The path information could not be get because the configuration of the path was changed when getting the latest path information after the Offline, Online, or Clear Data.

Action
Click Refresh after you confirm the reconfiguration of the path is not done.

KAPL02076-W

An attempt to acquire the HDLM version information failed. Details = aa...aa

Details
The HDLM version information could not be acquired correctly.
aa...aa: Code showing reason for error

Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras utility for collecting HDLM error information to collect the error information, and then contact your HDLM vendor or maintenance company. if there is a maintenance contract for HDLM.

KAPL02077-W

An attempt to acquire the Service Pack version information failed. Details = aa...aa

Details
aa...aa: Code showing reason for error

Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras utility for collecting HDLM error information to collect the error information, and then contact your HDLM vendor or maintenance company if there is a maintenance contract for HDLM.

KAPL02080-W

All the current trace files will be deleted. Is this OK? [OK/Cancel]

Details
If you set a value less than the current value of the trace file size or number of trace files, all the current trace files will be deleted. To continue the operation, click OK. To cancel the operation, click Cancel.

Action
If you want to execute the operation, click OK. To cancel the operation, click Cancel.

KAPL02083-I

HDLM GUI is started by the user-specified JRE. aa...aa, bb...bb

Details
aa...aa: The JRE version by user-specified (character string)
bb...bb: The JRE vendor by user-specified (character string)

Action
None.

KAPL02084-E

An error occurred in HDLM GUI startup processing. HDLM GUI cannot start. Details = aa...aa bb...bb cc...cc

Details
aa...aa: Executed Function name (character string)
bb...bb: Return value of function (decimal number)
cc...cc: Information that shows failure part (character string)

Action
Re-execute. If the same error occurs even after removing the reservation, execute the DLMgetras utility for collecting HDLM error information to collect the error information, and then contact your HDLM vendor or maintenance company if there is a maintena.

KAPL02087-I

"Configuration View" is not supported for this storage system model.
Please use the "Path List View" instead. Storage = aa...aa

Details
"Configuration View" cannot be displayed for the selected storage subsystem because the HDLM GUI does not support the configuration figure display for the selected storage subsystem.
aa...aa: Name of Storage Subsystem

Action
Please use the "Path List View".

KAPL02200-I

GUI information - aa...aa

Details
This information is required for determining the cause of the problem (if any).
aa...aa: Trace information (character string)

Action
None.

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2003, 2007, Hitachi, Ltd.