HiCommand Dynamic Link Manager User's Guide (for Windows(R))

9.6 HDLM driver (filter component) messages

KAPL05001-I
DriverEntry() started.

Details

The initialization function was executed (started).

Action

None.

KAPL05002-I
DriverEntry() completed normally.

Details

The initialization function completed successfully.

Action

None.

KAPL05003-I
The HDLM driver (filter component) was successfully attached to Disk (aa...aa), Partition (bb...bb).

Details

The device object of the HDLM driver (filter component) was added to the device stack corresponding to Disk (aa...aa: Disk sequence number) and Partition (bb...bb: Partition sequence number that is fixed to 0).

Action

None.

KAPL05004-I
The filtering function (aa...aa) for the HDLM driver (filter component) was initialized successfully.

Details

The HDLM driver (filter component) was successfully initialized for each device object.

aa...aa: Device object address (hexadecimal number)

Action

None.

KAPL05005-I
The control function (aa...aa) for the HDLM driver (filter component) was initialized successfully.

Details

The HDLM driver (filter component) was successfully initialized for each device object.

aa...aa: Device object address (hexadecimal number)

Action

None.

KAPL05008-E
Could not allocate memory. (aa...aa:bb...bb)

Details

The OS memory allocation function or the function that allocates memory of the specified size as a side effect could not be executed. (aa...aa: Information indicating the number of program lines (hexadecimal number), bb...bb: Memory capture size (hexadecimal number))

Action

Check whether the HDLM driver has started normally. If it has not started or contains an error, execute the DLMgetras utility for collecting HDLM error information, and then contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM. For details on the DLMgetras utility, see 8.2 DLMgetras (utility for collecting HDLM error information).

KAPL05010-E
Could not initialize the HDLM driver (filter component). (aa...aa:bb...bb)

Details

The HDLM driver (filter component) could not be initialized for each device object.

aa...aa and bb...bb: Device object address (aa...aa and bb...bb: Fixed to 0)

Action

Check whether the HDLM driver has started normally. If it has not started or contains an error, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM and report the error and detail code.

KAPL05011-E
Could not attach the HDLM driver (filter component) to Disk (aa...aa), Partition (bb...bb). (cc...cc:dd...dd)

Details

The path corresponding to Disk (aa...aa: Disk sequence number (decimal number)) and Partition (bb...bb: Partition number (decimal number)) could not be registered in the core logic

cc...cc: Error code (hexadecimal number)

dd...dd: Filter driver management table address (hexadecimal number)

Action

Check whether the HDLM driver has started normally. If it has not started or contains an error, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM and report the error and detail code.

KAPL05012-I
The device (aa...aa) for Disk (bb...bb), Partition (cc...cc) is selected for a mounted drive.

Details

The device object corresponding to Disk (bb...bb: Disk sequence number (decimal number)), Partition (cc...cc: Partition sequence number (decimal number)), and (aa...aa: Device object address (hexadecimal number)) is the first path for the LU (including the non-HDLM target device).

Action

None.

KAPL05013-I
The device (aa...aa) for Disk (bb...bb), Partition (cc...cc) was removed from the mounted drive.

Details

The device object corresponding to Disk (bb...bb: Disk sequence number (decimal number)), Partition (cc...cc: Partition sequence number (decimal number)), and (aa...aa: Device object address (hexadecimal number)) is the second or subsequent path for the LU.

Action

This is normal operation. If the target drive cannot be referenced, check the disk configuration.

KAPL05014-I
The device object (aa...aa) was registered as the path (bb...bb).

Details

The path (bb...bb: Core logic path identifier (hexadecimal number)) of the device object (aa...aa: Filter driver management table address (hexadecimal number)) was successfully registered in the core logic.

Action

None.

KAPL05018-W
The FO processing in the path (aa...aa) failed. (bb...bb:cc...cc)

Details

There is no path where FO processing is to be performed. Path (aa...aa: Path ID of the path where I/O processing was performed for the first time (hexadecimal number)), (bb...bb: Failure code (hexadecimal number), cc...cc: Identification value for internal processing (0 or 1))

Action

The I/O being processed is discarded. Check the status of the device path and take an appropriate action.

KAPL05031-W
Disk(aa...aa) is not a target disk system for HDLM.(bb...bb,cc...cc)

Details

The disk (aa...aa: Partition sequence number (decimal number)) is not a CoreLogic management-target disk. (bb...bb: Degree of progress in disk recognition processing (hexadecimal number), cc...cc: Execution result of the disk confirmation command for disk recognition processing (hexadecimal number))

Action

If this message is displayed for a disk that is not supported by HDLM, there is no problem.

If this message is displayed for a disk that is supported by HDLM, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.

KAPL05032-I
The path health checking for the path (aa...aa) completed normally. (bb...bb,cc...cc)

Details

aa...aa: Path ID (hexadecimal number)

bb...bb: Disk sequence number (decimal number)

cc...cc: Degree of progress in health checking (hexadecimal number)

Action

None.

KAPL05033-W
The path health checking for the path (aa...aa) failed.(bb...bb,cc...cc,dd...dd)

Details

aa...aa: Path ID (hexadecimal number)

bb...bb: Disk sequence number (decimal number)

cc...cc: Degree of progress in health checking (hexadecimal number)

dd...dd: Execution result of health checking (hexadecimal number)

Action

Check the path for which the path health checking failed. If this message is displayed for an unexpected path, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.

KAPL05034-I
Disk(aa...aa) is a target disk system for HDLM.(bb...bb,cc...cc)

Details

The disk is a CoreLogic management-target disk.

aa...aa: Partition sequence number (decimal number)

bb...bb: Degree of progress in disk recognition processing (hexadecimal number)

cc...cc: Execution result of the disk confirmation command for disk recognition processing (hexadecimal number)

Action

None.

KAPL05035-I
The HDLM driver (filter component (aa...aa)) was successfully attached to the device object (bb...bb).

Details

The physical device object was successfully attached to the device stack.

bb...bb: Device object address (decimal number)

Action

None.

KAPL05036-E
Failed to attach the HDLM driver (filter component (aa...aa)) to the device object (bb...bb).

Details

The physical device object could not be added to the device stack.

bb...bb: Device object address (decimal number)

Action

Check whether the HDLM driver has started normally. If it has not started or contains an error, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM and report the error and detail code.

KAPL05301-E
A path has been removed.

Details

When the LU deletion functionality is available, the path information is output to the event log. The removed path information is displayed in the event viewer with the following format:

PathID PathName DskName iLU ChaPort

When a path is added to an LU, this message might appear. Note that this message is output by Windows activities, and not by an error.

Action

Make sure that the path is correctly connected to the LU, and then recover the path. If failed to recover the path, contact your HDLM vendor or the maintenance company if there is a maintenance contract for HDLM.

KAPL05819-I
Data for maintenance: aa...aa bb...bb cc...cc dd...dd.

Details

The filter driver outputs this message for maintenance.

aa...aa: HDLM Device minor number (decimal number)

bb...bb: Message output location information (decimal number)

cc...cc: Detailed information 1 (decimal number)

dd...dd: Detailed information 2 (decimal number)

Action

None.

[Contents][Back][Next]

[Trademarks]