# httpd.conf RSD Version 86.7 for Apache2.4 ssl # This is the main Apache HTTP server configuration file. It contains the # configuration directives that give the server its instructions. # See for detailed information. # In particular, see # # for a discussion of each configuration directive. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "logs/access_log" # with ServerRoot set to "/usr/local/apache2" will be interpreted by the # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" # will be interpreted as '/logs/access_log'. # # NOTE: Where filenames are specified, you must use forward slashes # instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). # If a drive letter is omitted, the drive on which httpd.exe is located # will be used by default. It is recommended that you always supply # an explicit drive letter in absolute paths to avoid confusion. # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # Do not add a slash at the end of the directory path. If you point # ServerRoot at a non-local disk, be sure to specify a local disk on the # Mutex directive, if file-based mutexes are used. If you wish to share the # same ServerRoot for multiple httpd daemons, you will need to change at # least PidFile. # ServerRoot "C:/Program Files/Apache Group/Apache2" #2010.08.18 Yokomizu(SK) Z70-3548:W7012224110 #2010.10.29 Kajigaya(HS21) SJV0685:W7012224617 #2011.09.30 Nakazawa(HS21) Z70-5175:W7552226225 #ProxyTimeout 1800 #Timeout 1800 Timeout 3600 # # Mutex: Allows you to set the mutex mechanism and mutex file directory # for individual mutexes, or change the global defaults # # Uncomment and change the directory if mutexes are file-based and the default # mutex file directory is not on a local disk or is not appropriate for some # other reason. # # Mutex default:logs # # Listen: Allows you to bind Apache to specific IP addresses and/or # ports, instead of the default. See also the # directive. # # Change this to Listen on specific IP addresses as shown below to # prevent Apache from glomming onto all bound IP addresses. # #Listen 12.34.56.78:80 Listen 80 #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa Listen 51100 # # Dynamic Shared Object (DSO) Support # # To be able to use the functionality of a module which was built as a DSO you # have to place corresponding `LoadModule' lines at this location so the # directives contained in it are actually available _before_ they are used. # Statically compiled modules (those listed by `httpd -l') do not need # to be loaded here. # # Example: # LoadModule foo_module modules/mod_foo.so # # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule access_compat_module modules/mod_access_compat.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule actions_module modules/mod_actions.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end LoadModule alias_module modules/mod_alias.so LoadModule allowmethods_module modules/mod_allowmethods.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule asis_module modules/mod_asis.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end LoadModule auth_basic_module modules/mod_auth_basic.so #LoadModule auth_digest_module modules/mod_auth_digest.so #LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_core_module modules/mod_authn_core.so #LoadModule authn_dbd_module modules/mod_authn_dbd.so #LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_file_module modules/mod_authn_file.so #LoadModule authn_socache_module modules/mod_authn_socache.so #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule authz_core_module modules/mod_authz_core.so #LoadModule authz_dbd_module modules/mod_authz_dbd.so #LoadModule authz_dbm_module modules/mod_authz_dbm.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule authz_groupfile_module modules/mod_authz_groupfile.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule authz_host_module modules/mod_authz_host.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end #LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_user_module modules/mod_authz_user.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26368 begin #LoadModule autoindex_module modules/mod_autoindex.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26368 end #LoadModule buffer_module modules/mod_buffer.so #LoadModule cache_module modules/mod_cache.so #LoadModule cache_disk_module modules/mod_cache_disk.so #LoadModule cern_meta_module modules/mod_cern_meta.so LoadModule cgi_module modules/mod_cgi.so #LoadModule charset_lite_module modules/mod_charset_lite.so #LoadModule data_module modules/mod_data.so #LoadModule dav_module modules/mod_dav.so #LoadModule dav_fs_module modules/mod_dav_fs.so #LoadModule dav_lock_module modules/mod_dav_lock.so #LoadModule dbd_module modules/mod_dbd.so #LoadModule deflate_module modules/mod_deflate.so LoadModule dir_module modules/mod_dir.so #LoadModule dumpio_module modules/mod_dumpio.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule env_module modules/mod_env.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end #LoadModule expires_module modules/mod_expires.so #LoadModule ext_filter_module modules/mod_ext_filter.so #LoadModule file_cache_module modules/mod_file_cache.so #LoadModule filter_module modules/mod_filter.so #2011.06.14 S.Kanno W74Z2225835 #LoadModule headers_module modules/mod_headers.so LoadModule headers_module modules/mod_headers.so #LoadModule heartbeat_module modules/mod_heartbeat.so #LoadModule heartmonitor_module modules/mod_heartmonitor.so #LoadModule ident_module modules/mod_ident.so #LoadModule imagemap_module modules/mod_imagemap.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule include_module modules/mod_include.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end #LoadModule info_module modules/mod_info.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule isapi_module modules/mod_isapi.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so #LoadModule ldap_module modules/mod_ldap.so #LoadModule logio_module modules/mod_logio.so LoadModule log_config_module modules/mod_log_config.so #LoadModule log_debug_module modules/mod_log_debug.so #LoadModule log_forensic_module modules/mod_log_forensic.so #LoadModule lua_module modules/mod_lua.so LoadModule mime_module modules/mod_mime.so #LoadModule mime_magic_module modules/mod_mime_magic.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 begin #LoadModule negotiation_module modules/mod_negotiation.so # 2015.12.25 M.Ito xxxxxxx3439 ID:26285 end LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule proxy_connect_module modules/mod_proxy_connect.so #LoadModule proxy_express_module modules/mod_proxy_express.so #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule proxy_html_module modules/mod_proxy_html.so #LoadModule proxy_http_module modules/mod_proxy_http.so #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so #LoadModule ratelimit_module modules/mod_ratelimit.so #LoadModule reflector_module modules/mod_reflector.so #LoadModule remoteip_module modules/mod_remoteip.so #LoadModule request_module modules/mod_request.so #LoadModule reqtimeout_module modules/mod_reqtimeout.so #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #LoadModule rewrite_module modules/mod_rewrite.so LoadModule rewrite_module modules/mod_rewrite.so #LoadModule sed_module modules/mod_sed.so #LoadModule session_module modules/mod_session.so #LoadModule session_cookie_module modules/mod_session_cookie.so #LoadModule session_crypto_module modules/mod_session_crypto.so #LoadModule session_dbd_module modules/mod_session_dbd.so LoadModule setenvif_module modules/mod_setenvif.so #LoadModule slotmem_plain_module modules/mod_slotmem_plain.so #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so #LoadModule socache_dbm_module modules/mod_socache_dbm.so #LoadModule socache_memcache_module modules/mod_socache_memcache.so LoadModule socache_shmcb_module modules/mod_socache_shmcb.so #LoadModule speling_module modules/mod_speling.so #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #LoadModule ssl_module modules/mod_ssl.so LoadModule ssl_module modules/mod_ssl.so #LoadModule status_module modules/mod_status.so #LoadModule substitute_module modules/mod_substitute.so #LoadModule unique_id_module modules/mod_unique_id.so #LoadModule userdir_module modules/mod_userdir.so #LoadModule usertrack_module modules/mod_usertrack.so #LoadModule version_module modules/mod_version.so #LoadModule vhost_alias_module modules/mod_vhost_alias.so #LoadModule watchdog_module modules/mod_watchdog.so #LoadModule xml2enc_module modules/mod_xml2enc.so # # If you wish httpd to run as a different user or group, you must run # httpd as root initially and it will switch. # # User/Group: The name (or #number) of the user/group to run httpd as. # It is usually good practice to create a dedicated user and group for # running httpd, as with most system services. # User daemon Group daemon # 'Main' server configuration # # The directives in this section set up the values used by the 'main' # server, which responds to any requests that aren't handled by a # definition. These values also provide defaults for # any containers you may define later in the file. # # All of these directives may appear inside containers, # in which case these default settings will be overridden for the # virtual host being defined. # # # ServerAdmin: Your address, where problems with the server should be # e-mailed. This address appears on some server-generated pages, such # as error documents. e.g. admin@your-domain.com # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #ServerAdmin admin@example.com ServerAdmin admin@domain.com # # ServerName gives the name and port that the server uses to identify itself. # This can often be determined automatically, but we recommend you specify # it explicitly to prevent problems during startup. # # If your host doesn't have a registered DNS name, enter its IP address here. # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #ServerName www.example.com:80 ServerName svp:80 # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs" DocumentRoot "C:/dkc200/san/htdocs" # # Deny access to the entirety of your server's filesystem. You must # explicitly permit access to web content directories in other # blocks below. # #2019.05.29 S.Moriya #76681 # 2015.12.25 M.Ito xxxxxxx3439 ID:26324 begin Options None # 2015.12.25 M.Ito xxxxxxx3439 ID:26324 end AllowOverride none Require all denied AllowMethods GET POST # # Note that from this point forward you must specifically allow # particular features to be enabled - so if something's not working as # you might expect, make sure that you have specifically enabled it # below. # # # DocumentRoot: The directory out of which you will serve your # documents. By default, all requests are taken from this directory, but # symbolic links and aliases may be used to point to other locations. # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #2019.05.29 S.Moriya #76681 # # # Possible values for the Options directive are "None", "All", # or any combination of: # Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews # # Note that "MultiViews" must be named *explicitly* --- "Options All" # doesn't give it to you. # # The Options directive is both complicated and important. Please see # http://httpd.apache.org/docs/2.4/mod/core.html#options # for more information. # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #Options Indexes FollowSymLinks # 2015.12.25 M.Ito xxxxxxx3439 ID:13732 begin Options None # 2015.12.25 M.Ito xxxxxxx3439 ID:13732 end # # AllowOverride controls what directives may be placed in .htaccess files. # It can be "All", "None", or any combination of the keywords: # AllowOverride FileInfo AuthConfig Limit # AllowOverride None # # Controls who can get stuff from this server. # Require all granted # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin # AllowMethods GET POST OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end AllowMethods GET POST # # DirectoryIndex: sets the file that Apache will serve if a directory # is requested. # DirectoryIndex index.html # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # Require all denied # # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a # container, that host's errors will be logged there and not here. # #2010.10.22 for W7012224597 RAID700 V01+1 By S.Kanno #ErrorLog "logs/error.log" ErrorLog "|\"C:/Program Files/Apache Group/Apache2/bin/rotatelogs.exe\" -l \"C:/Program Files/Apache Group/Apache2/logs/error_%Y%m%d.log\" 86400" # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # # 2015.12.25 M.Ito xxxxxxx3439 ID:13688 begin LogFormat "%a %A %h %H %l %m %s %t %u %U \"%{Referer}i\" " combined # 2015.12.25 M.Ito xxxxxxx3439 ID:13688 end # You need to enable mod_logio.c to use %I and %O LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio # # The location and format of the access logfile (Common Logfile Format). # If you do not define any access logfiles within a # container, they will be logged here. Contrariwise, if you *do* # define per- access logfiles, transactions will be # logged therein and *not* in this file. # #2010.10.22 for W7012224597 RAID700 V01+1 By S.Kanno #CustomLog "logs/access.log" common # 2015.12.25 M.Ito xxxxxxx3439 ID:13688 begin CustomLog "|\"C:/Program Files/Apache Group/Apache2/bin/rotatelogs.exe\" -l \"C:/Program Files/Apache Group/Apache2/logs/access_%Y%m%d.log\" 86400" combined # 2015.12.25 M.Ito xxxxxxx3439 ID:13688 end # # If you prefer a logfile with access, agent, and referer information # (Combined Logfile Format) you can use the following directive. # #CustomLog "logs/access.log" combined # # Redirect: Allows you to tell clients about documents that used to # exist in your server's namespace, but do not anymore. The client # will make a new request for the document at its new location. # Example: # Redirect permanent /foo http://www.example.com/bar # # Alias: Maps web paths into filesystem paths and is used to # access content that does not live under the DocumentRoot. # Example: # Alias /webpath /full/filesystem/path # # If you include a trailing / on /webpath then the server will # require it to be present in the URL. You will also likely # need to provide a section to allow access to # the filesystem path. # # ScriptAlias: This controls which directories contain server scripts. # ScriptAliases are essentially the same as Aliases, except that # documents in the target directory are treated as applications and # run by the server when requested rather than as documents sent to the # client. The same rules about trailing "/" apply to ScriptAlias # directives as to Alias. # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/" ScriptAlias /cgi-bin/ "C:/dkc200/san/cgi-bin/" #2011.02.09 H.Nakazawa(HS21) W7352225158 For Resource Group Redirect permanent /cgi-bin/utility/sjcmain.cgi /sanproject/index.do Redirect permanent /cgi-bin/utility/sjc0000.cgi /sanproject/index.do Redirect permanent /cgi-bin/utility/loginex.cgi /sanproject/index.do Redirect permanent /cgi-bin/utility/login.cgi /sanproject/index.do # # ScriptSock: On threaded servers, designate the path to the UNIX # socket used to communicate with the CGI daemon of mod_cgid. # #Scriptsock cgisock # # "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased # CGI directory exists, if you have that configured. # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #2019.05.29 S.Moriya #76681 # AllowOverride None Options None Require all granted # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin # AllowMethods GET POST OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end AllowMethods GET POST Header always set X-Frame-Options SAMEORIGIN Header always set X-Frame-Options SAMEORIGIN Header always set X-Frame-Options SAMEORIGIN # # DefaultType: the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # #DefaultType text/plain # # TypesConfig points to the file containing the list of mappings from # filename extension to MIME-type. # TypesConfig conf/mime.types # # AddType allows you to add to or override the MIME configuration # file specified in TypesConfig for specific file types. # #AddType application/x-gzip .tgz # # AddEncoding allows you to have certain browsers uncompress # information on the fly. Note: Not all browsers support this. # #AddEncoding x-compress .Z #AddEncoding x-gzip .gz .tgz # # If the AddEncoding directives above are commented-out, then you # probably should define those extensions to indicate media types: # AddType application/x-compress .Z #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #AddType application/x-gzip .gz .tgz AddType application/x-tgz .tgz # # AddHandler allows you to map certain file extensions to "handlers": # actions unrelated to filetype. These can be either built into the server # or added with the Action directive (see below) # # To use CGI scripts outside of ScriptAliased directories: # (You will also need to add "ExecCGI" to the "Options" directive.) # #AddHandler cgi-script .cgi # For type maps (negotiated resources): #AddHandler type-map var # # Filters allow you to process content before it is sent to the client. # # To parse .shtml files for server-side includes (SSI): # (You will also need to add "Includes" to the "Options" directive.) # #AddType text/html .shtml #AddOutputFilter INCLUDES .shtml # # The mod_mime_magic module allows the server to use various hints from the # contents of the file itself to determine its type. The MIMEMagicFile # directive tells the module where the hint definitions are located. # #MIMEMagicFile conf/magic # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # MaxRanges: Maximum number of Ranges in a request before # returning the entire resource, or one of the special # values 'default', 'none' or 'unlimited'. # Default setting is to accept 200 Ranges. #MaxRanges unlimited # # EnableMMAP and EnableSendfile: On systems that support it, # memory-mapping or the sendfile syscall may be used to deliver # files. This usually improves server performance, but must # be turned off when serving from networked-mounted # filesystems or if support for these functions is otherwise # broken on your system. # Defaults: EnableMMAP On, EnableSendfile Off # #EnableMMAP off #EnableSendfile on # Supplemental configuration # # The configuration files in the conf/extra/ directory can be # included to add extra features or to modify the default configuration of # the server, or you may simply copy their contents here and change as # necessary. # Server-pool management (MPM specific) #Include conf/extra/httpd-mpm.conf # Multi-language error messages #Include conf/extra/httpd-multilang-errordoc.conf # Fancy directory listings #Include conf/extra/httpd-autoindex.conf # Language settings #Include conf/extra/httpd-languages.conf # User home directories #Include conf/extra/httpd-userdir.conf # Real-time info on requests and configuration #Include conf/extra/httpd-info.conf # Virtual hosts #Include conf/extra/httpd-vhosts.conf # Local access to the Apache HTTP Server Manual #Include conf/extra/httpd-manual.conf # Distributed authoring and versioning (WebDAV) #Include conf/extra/httpd-dav.conf # Various default settings #Include conf/extra/httpd-default.conf # Configure mod_proxy_html to understand HTML4/XHTML1 # #Include conf/extra/proxy-html.conf # # Secure (SSL/TLS) connections #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa #Include conf/extra/httpd-ssl.conf Include conf/extra/httpd-ssl.conf # # Note: The following must must be present to support # starting without SSL on platforms with no /dev/random equivalent # but a statically compiled-in mod_ssl. # SSLRandomSeed startup builtin SSLRandomSeed connect builtin # # uncomment out the below to deal with user agents that deliberately # violate open standards by misusing DNT (DNT *must* be a specific # end-user choice) # # #BrowserMatch "MSIE 10.0;" bad_DNT # # #RequestHeader unset DNT env=bad_DNT # #2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa (Block start) ServerSignature Off ServerTokens Prod #2019.05.29 S.Moriya #76681 AuthType Basic AuthUserFile "C:\DKC200\others\.htpasswdrdp" AuthName "Enter user ID and password." Require valid-user # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin # AllowMethods GET POST OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end AllowMethods GET POST # Comment out 2010.02.01 K.Sakurai(HS21) W71E4401869 #ScriptAlias /Proxy/ "C:/dkc200/san/cgi-bin/Utility/Proxy/" #2010.04.22 for V68H2225412 RAID600 Security By H.Yasukawa # #RewriteEngine on #RewriteCond %{REQUEST_METHOD} ^(TRACE|TRACK) #RewriteRule .* - [F] # ##2008.12.25 for W701222xxxx RAID700 1st By H.Yasukawa (Block end ) TraceEnable off #2010.04.22 for V68H2225412 RAID600 Security By H.Yasukawa FileETag MTime Size #2011.09.10 H.Yasukawa W71E2226178 # Completely dis-allow the use of Range headers RequestHeader unset Range RequestHeader unset Request-Range #2014.05.08 S.Moriya W71D2222129 RewriteEngine On RewriteCond %{HTTP:Content-Type} "multipart\/form-data;(\s*)boundary=[a-zA-Z0-9_-]{4000}" RewriteRule ^/(.*)$ /405.html [R=301,L] SetEnvIf Content-Type ^.{4000,}$ bad-content-type=1 RequestHeader unset Content-Type env=bad-content-type #2009.8.31 S.Kameoka #2010.02.01 K.Sakurai(HS21) W71E4401869 # For SN2 #2020.03.13 S.Moriya ID:#98675 ProxyPass ajp://localhost:8009/sanproject/ secret=U]t?J5]2YXLlKvXQE]W%lQR*0y=}33s6]WC?xb0w1?jQ?SUA;HR-Q(]+~6k_A~? # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin AllowMethods GET POST PUT DELETE OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end #2020.03.13 S.Moriya ID:#98675 ProxyPass ajp://localhost:8009/sanproject/Proxy/ secret=U]t?J5]2YXLlKvXQE]W%lQR*0y=}33s6]WC?xb0w1?jQ?SUA;HR-Q(]+~6k_A~? # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin AllowMethods GET POST PUT DELETE OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end #2020.03.13 S.Moriya ID:#98675 ProxyPass ajp://localhost:9009/restapi nocanon secret=U]t?J5]2YXLlKvXQE]W%lQR*0y=}33s6]WC?xb0w1?jQ?SUA;HR-Q(]+~6k_A~? # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin AllowMethods GET POST PUT PATCH DELETE OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end #2010.11.08 Y.Kajigaya(HS21) W73F2224634 #2014.08.13 N.Takahashi(HS21) Z8414401359 #2019.05.29 S.Moriya #76681 # Options -Indexes FollowSymLinks # 2015.12.25 M.Ito xxxxxxx3439 ID:13732 begin Options None # 2015.12.25 M.Ito xxxxxxx3439 ID:13732 end AllowOverride None Require all denied # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 begin # AllowMethods GET POST OPTIONS # 2015.12.25 M.Ito xxxxxxx3439 ID:26396 end AllowMethods GET POST #2011.06.14 S.Kanno W74Z2225835 #2011.08.05 S.Kanno W74Z2226057 Header set Pragma no-cache Header set Cache-Control no-cache Header set Expires "Thu, 01 Dec 1994 16:00:00 GMT" #2011.03.31 N.Takahashi(HS21) W74D2225505 #2014.08.13 N.Takahashi(HS21) Z8414401359 Options None Require all denied #2013.10.28 N.Takahashi(HS21) Y80D4401416 #2014.08.13 N.Takahashi(HS21) Z8414401359 Options None Require all denied # 2015.12.25 M.Ito xxxxxxx3439 ID:13736 begin LimitRequestBody 104857600 # 2015.12.25 M.Ito xxxxxxx3439 ID:13736 end # 2015.12.25 M.Ito xxxxxxx3439 ID:13737 begin LimitRequestFields 100 # 2015.12.25 M.Ito xxxxxxx3439 ID:13737 end # 2015.12.25 M.Ito xxxxxxx3439 ID:13738 begin LimitRequestFieldSize 8190 # 2015.12.25 M.Ito xxxxxxx3439 ID:13738 end # 2015.12.25 M.Ito xxxxxxx3439 ID:13739 begin LimitRequestLine 8190 # 2015.12.25 M.Ito xxxxxxx3439 ID:13739 end # 2018.08.31 S.Kanno(HS21) ID:#54295 begin Header set X-XSS-Protection "1; mode=block" Header set X-Content-Type-Options nosniff # 2018.08.31 S.Kanno ID:#54295 end # 2019.12.02 T.Ishida(HS21) ID:#90435 begin Header set X-Frame-Options SAMEORIGIN Header unset X-Frame-Options # 2019.12.02 T.Ishida(HS21) ID:#90435 end AcceptFilter http none AcceptFilter https none EnableSendfile off EnableMMAP off