title=USB Flash Drive

description=Use the following instructions to initialize the system.

#Steps
step1text=Safely eject the USB flash drive from your personal computer.
step2text=Select one canister in the control enclosure. On the right side of that canister look for the LEDs. Ensure the LEDs (from left to right) are on, blinking, and off. Insert the USB flash drive in to any port on that canister.
step3text=Wait for the amber fault LED to stop blinking. It is the third LED on the right side of the canister. This process can take up to 5 minutes.
step4text=Remove the USB flash drive.
step5text=Reinsert the USB flash drive into your personal computer and click <b>Next</b>.

improperUSBStick=The system did not initialize successfully. Follow these steps:
improperUSBStickAction1=<b>1.</b> Ping the system IP address. If successful, point your web browser to the IP address and click <b>OK</b> to exit this wizard.
improperUSBStickAction2=<b>2.</b> Confirm that the middle LED is blinking on the system. If the LED is not blinking and the system has been powered on for at least 10 minutes, contact IBM Support.
improperUSBStickAction3=<b>3.</b> Reinsert the USB flash drive into the system. If the fault LED (on the right) does not start and stop blinking, which could take up to 3 minutes, contact IBM Support.
improperUSBStickAction4=<b>4.</b> Click <b>Cancel</b> and reinsert the USB flash drive into your personal computer.