WEBVTT 1 00:00.000 --> 00:03.940 All right, so let's go ahead and configure a new policy map. 2 00:03.940 --> 00:07.880 We'll say policy map advanced, police, or how about that? 3 00:07.880 --> 00:09.080 And we'll look at both of our options. 4 00:09.080 --> 00:12.920 I'm going to get onto the class default queue. 5 00:12.920 --> 00:15.600 And again, it's still the same command as police. 6 00:15.600 --> 00:17.680 And we're still going to be able to specify a CIR. 7 00:17.680 --> 00:22.820 It can include CIR or not, but let's just say it's 80,000 kilobits per second, 8 00:22.820 --> 00:24.360 80,000. 9 00:24.360 --> 00:26.720 And so then I can specify my BC of 5,000. 10 00:26.720 --> 00:30.320 When I run a question mark here, we see that I can hit Enter, and that's what WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 10 00:26.720 --> 00:30.320 When I run a question mark here, we see that I can hit Enter, and that's what 11 00:30.320 --> 00:30.640 we did in 12 00:30.640 --> 00:35.760 the last video, is we just made a basic two-color single-rate police. 13 00:35.760 --> 00:37.280 Here's my single-rate. 14 00:37.280 --> 00:41.760 My two colors are based on whether I have a BC token or not. 15 00:41.760 --> 00:44.280 But now we have other parameters to consider. 16 00:44.280 --> 00:48.360 We've got, for example, the ability to configure an excess burst. 17 00:48.360 --> 00:53.040 So if I want to create that first option to say, hey, I want two buckets, but I 18 00:53.040 --> 00:53.240 don't 19 00:53.240 --> 00:57.240 want to configure the peak information rate, as we see right here, we have that 20 00:57.240 --> 00:58.000 option. 21 00:58.000 --> 01:02.240 I'm just going to say BE, and maybe I make it 5,000 bytes as well. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 21 00:58.000 --> 01:02.240 I'm just going to say BE, and maybe I make it 5,000 bytes as well. 22 01:02.240 --> 01:06.480 And now we see we can hit Enter, and we can start to perform our actions. 23 01:06.480 --> 01:13.610 So I might say, again, conform action is transmit and exceed action is, well, 24 01:13.610 --> 01:14.160 we can 25 01:14.160 --> 01:17.600 now let's say we want to wipe out the DSCP tag. 26 01:17.600 --> 01:22.680 So I can say, set transmit of zero, or we mentioned default works as well. 27 01:22.680 --> 01:28.720 And then my violate action is probably going to be to drop. 28 01:28.720 --> 01:37.200 So if I look at my configuration, let's try that section policy map. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 28 01:28.720 --> 01:37.200 So if I look at my configuration, let's try that section policy map. 29 01:37.200 --> 01:40.180 All right, so now we see the advanced police, sir. 30 01:40.180 --> 01:44.600 We have a CIR single rate, but we do have two buckets. 31 01:44.600 --> 01:47.970 And so the two buckets are going to give us three colors, our conform action, 32 01:47.970 --> 01:48.320 our exceed 33 01:48.320 --> 01:53.320 action and violate action will be, you know, these definitions are going to be, 34 01:53.320 --> 01:53.520 or these 35 01:53.520 --> 02:00.920 actions are going to be applied to the conform exceed and violate colors. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 35 01:53.520 --> 02:00.920 actions are going to be applied to the conform exceed and violate colors. 36 02:00.920 --> 02:07.480 So that would be our first option for configuring a single rate three color 37 02:07.480 --> 02:08.600 police, sir. 38 02:08.600 --> 02:10.560 But let's go ahead and do this again. 39 02:10.560 --> 02:19.150 It's a policy map, advanced police, sir, except we'll say dual rate, dr, and 40 02:19.150 --> 02:20.520 class, class 41 02:20.520 --> 02:23.440 default, and the police command again. 42 02:23.440 --> 02:28.080 So now I'm going to specify still my CIR of 80,000 in my BC. 43 02:28.080 --> 02:30.880 Notice this time I'm not specifying the parameters. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 43 02:28.080 --> 02:30.880 Notice this time I'm not specifying the parameters. 44 02:30.880 --> 02:37.280 I can just continue to use the just the numbers here. 45 02:37.280 --> 02:41.740 Although once I get to this point, I'm done, I can't actually specify a PIR. 46 02:41.740 --> 02:46.080 So what I need to do here is specify my peak information rate. 47 02:46.080 --> 02:49.980 And this is one parameter that is required, by the way, we'll notice that I can 48 02:49.980 --> 02:50.400 't, if 49 02:50.400 --> 02:54.590 I'm going to enter a number, it's going to interpret that as be is what this is 50 02:54.590 --> 02:54.640 . 51 02:54.640 --> 02:59.160 So my PIR, let's say it's a hundred thousand. 52 02:59.160 --> 03:07.350 And then I can specify my be 5000, at which point the be is required, we'll see WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 52 02:59.160 --> 03:07.350 And then I can specify my be 5000, at which point the be is required, we'll see 53 03:07.350 --> 03:07.720 . 54 03:07.720 --> 03:09.600 And again, I can keep going on one line. 55 03:09.600 --> 03:11.000 I could say conform action here. 56 03:11.000 --> 03:17.320 I could hit enter and say conform action transmit and so on and so forth. 57 03:17.320 --> 03:22.210 But the way that we configure the different police is simply with the 58 03:22.210 --> 03:23.160 parameters that 59 03:23.160 --> 03:24.500 we're providing. 60 03:24.500 --> 03:30.920 I provide BC only if I only provided BC, then that is going to provide me with WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 60 03:24.500 --> 03:30.920 I provide BC only if I only provided BC, then that is going to provide me with 61 03:30.920 --> 03:31.700 only two 62 03:31.700 --> 03:32.740 colors. 63 03:32.740 --> 03:38.400 If I provided a BE, well now I have three colors, but it's still single rate 64 03:38.400 --> 03:39.000 until I 65 03:39.000 --> 03:41.420 provide the PIR. 66 03:41.420 --> 03:42.980 At this point, I have two rates. 67 03:42.980 --> 03:44.220 I have the CIR. 68 03:44.220 --> 03:45.980 I have the PIR. 69 03:45.980 --> 03:52.420 And because of that, I'm going to need to have a size for my bucket, my BE. 70 03:52.420 --> 03:57.850 And if we just hit enter, it'll take that default value, but it will require, 71 03:57.850 --> 03:58.500 again, 72 03:58.500 --> 04:01.180 configuring a BE bucket size. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 72 03:58.500 --> 04:01.180 configuring a BE bucket size. 73 04:01.180 --> 04:05.440 And that is how we go about configuring our more advanced police.