WEBVTT

1
00:00.000 --> 00:02.800
In this video I'd like to walk you through the lab tasks.

2
00:02.800 --> 00:05.120
So to start off, let's take a look at those lab tasks.

3
00:05.120 --> 00:10.400
And here they are. So on server 1 and using putty and the TXT file on server 1,

4
00:10.400 --> 00:15.440
configure traditional EAGRP or name BRGRP and then use show commands to verify.

5
00:15.440 --> 00:20.000
And for bonus points, we could also set up variants of 2 on router 4 and then

6
00:20.000 --> 00:20.560
test results

7
00:20.560 --> 00:24.400
regarding routing to 8888. Sounds great. So here's our lab environment.

8
00:24.400 --> 00:27.520
Here is the topology. Let me go ahead and double click on that to bring it up.

9
00:27.520 --> 00:30.880
Fantastic. And also double click here on server 1 to bring it up.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

9
00:27.520 --> 00:30.880
Fantastic. And also double click here on server 1 to bring it up.

10
00:30.880 --> 00:34.480
And there it is. Go ahead and click here to bring the focus over.

11
00:34.480 --> 00:39.410
And there are our commands. So let's imagine that we want to configure named EA

12
00:39.410 --> 00:40.080
GRP.

13
00:40.080 --> 00:43.760
What we could do is just take this section right here in configuration mode and

14
00:43.760 --> 00:44.800
do it on all

15
00:44.800 --> 00:47.600
8 routers. So if you want to do that manually or in the lab if you didn't

16
00:47.600 --> 00:48.560
manually or if you did

17
00:48.560 --> 00:52.160
copy paste, either way is great. As long as you understand the concept of how

18
00:52.160 --> 00:52.800
to implement

19
00:52.800 --> 00:57.760
named or traditional EAGRP. So I'm going to right click on that, copy it and

20
00:57.760 --> 00:59.120
then go to my icon

21
00:59.120 --> 01:03.790
up here so I can paste it into all routers. I'm going to type in config T and
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

21
00:59.120 --> 01:03.790
up here so I can paste it into all routers. I'm going to type in config T and

22
01:03.790 --> 01:04.960
then control V to put

23
01:04.960 --> 01:09.900
in the commands. And then I want to send that to everybody except for the PCs

24
01:09.900 --> 01:11.200
PC8 PC7 PC1

25
01:11.200 --> 01:16.320
and click on sends grip and we're done. And it's going to converge super fast.

26
01:16.320 --> 01:17.440
So if we go to our 4

27
01:18.000 --> 01:24.930
and we do a show IP route for 8888 for example, we have one route and we are

28
01:24.930 --> 01:26.960
going through 10 0 24

29
01:26.960 --> 01:32.720
to look at the topology that's our two right there. If we do a show IP EAGRP
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

29
01:26.960 --> 01:32.720
to look at the topology that's our two right there. If we do a show IP EAGRP

30
01:32.720 --> 01:33.840
topology and look at

31
01:33.840 --> 01:39.120
the topology table for 8888 and there it is right there. We have one successor

32
01:39.120 --> 01:40.000
and two feasible

33
01:40.000 --> 01:44.160
successors. And also in this text file I have here on server one. If you have

34
01:44.160 --> 01:44.720
the bottom,

35
01:44.720 --> 01:48.160
I have a ton of show commands you can practice with. So if you want to spend a

36
01:48.160 --> 01:49.040
few minutes and just

37
01:49.040 --> 01:53.190
verify the details of how it's set up and what's currently happening, these

38
01:53.190 --> 01:54.080
show commands can help

39
01:54.080 --> 01:58.290
you elaborate and enumerate what's going on with EAGRP. Many of these we've

40
01:58.290 --> 01:59.280
used in the demos

41
01:59.280 --> 02:04.140
up to this point. So now that named EAGRP is running, the second step for bonus
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

41
01:59.280 --> 02:04.140
up to this point. So now that named EAGRP is running, the second step for bonus

42
02:04.140 --> 02:05.120
points is to go

43
02:05.120 --> 02:10.010
ahead and modify variants. So here on our 4 if we did a trace route and this

44
02:10.010 --> 02:11.600
press enter with IP

45
02:11.600 --> 02:14.830
going to 8888, it's going to have one next first hop and that's going to be

46
02:14.830 --> 02:16.560
going through R2. So we'll

47
02:16.560 --> 02:21.400
go ahead and say for the probe count we can do three that'll work or make it

48
02:21.400 --> 02:23.200
more visual do 10

49
02:23.200 --> 02:26.910
and then press enter a few times and let it roll. And for that first hop it's

50
02:26.910 --> 02:28.640
always using .2.

51
02:28.640 --> 02:32.240
That was for all eight probes as it went through the individual hops in the
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

51
02:28.640 --> 02:32.240
That was for all eight probes as it went through the individual hops in the

52
02:32.240 --> 02:33.520
path. So now if we can

53
02:33.520 --> 02:38.120
figure variants we go to config T and let's do a do show run section router. It

54
02:38.120 --> 02:38.880
'll be a little bit

55
02:38.880 --> 02:42.780
easier that way. Give that a moment to process and I'm going to go ahead and go

56
02:42.780 --> 02:44.000
into named EAGRP

57
02:44.000 --> 02:48.320
configuration mode just by copying pasting that. I'm going to add just family

58
02:48.320 --> 02:49.600
for IPv4 Unicast

59
02:49.600 --> 02:54.480
Autom System 100 by copy pasting that. I'll go into topology base by copy past

60
02:54.480 --> 02:55.440
ing that and then we'll

61
02:55.440 --> 02:59.690
type in variants 2 and we'll type in. We'll do the show IP protocols. Again for

62
02:59.690 --> 03:00.560
that list of show
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

62
02:59.690 --> 03:00.560
that list of show

63
03:00.560 --> 03:05.280
commands here's a great reference right here that you can use. So if we go back

64
03:05.280 --> 03:07.040
to our EAGRP 100,

65
03:07.040 --> 03:10.480
you'll notice that we have a variance of 2. Fantastic and we've learned

66
03:10.480 --> 03:11.840
information from three neighbors.

67
03:11.840 --> 03:16.780
Our two are six and our three. Looking at our topology that's our two are six

68
03:16.780 --> 03:18.000
and our three. Fantastic.

69
03:18.000 --> 03:21.360
And now if we do that trace that we did before let's go and do a trace route

70
03:21.360 --> 03:23.520
and we'll go to 8888

71
03:23.520 --> 03:28.430
for IPv4 and then for the number of probes let's use 8 again and press enter a

72
03:28.430 --> 03:29.760
few times. Let it go

73
03:29.760 --> 03:34.550
and now we have round robbing with that first hop going to our two then next
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

73
03:29.760 --> 03:34.550
and now we have round robbing with that first hop going to our two then next

74
03:34.550 --> 03:36.000
one our three then our

75
03:36.000 --> 03:40.160
six then down to our two our three and our six and it's going to continue that

76
03:40.160 --> 03:41.280
process as it's load

77
03:41.280 --> 03:45.570
balancing. So we do a show IP route and we just go down to the 8888. We now

78
03:45.570 --> 03:46.800
have three EAGRP

79
03:46.800 --> 03:50.950
learned routes in our routing table and one by default would be the successor

80
03:50.950 --> 03:52.000
but because we set

81
03:52.000 --> 03:56.610
the variance to two it also included the two feasible successors and added

82
03:56.610 --> 03:57.680
those to the routing

83
03:57.680 --> 04:01.630
table for the load balancing. So thanks for joining me in this set of videos
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

83
03:57.680 --> 04:01.630
table for the load balancing. So thanks for joining me in this set of videos

84
04:01.630 --> 04:02.560
regarding understanding

85
04:02.560 --> 04:08.190
EAGRP and if you haven't yet taken time to do the hands-on practice I strongly

86
04:08.190 --> 04:09.440
encourage you to do

87
04:09.440 --> 04:12.270
it. And that's not just for this set of videos but for everyone where we

88
04:12.270 --> 04:14.000
provide a hands-on lab because

89
04:14.000 --> 04:17.690
that's the secret sauce that's going to help you better understand and get

90
04:17.690 --> 04:18.640
better at working with

91
04:18.640 --> 04:22.240
the technologies that we're teaching. So if you're on a mobile device or can't

92
04:22.240 --> 04:23.040
do the hands-on

93
04:23.040 --> 04:26.710
lab right now schedule time and make sure you get it done because it's going to

94
04:26.710 --> 04:27.520
be incredibly

95
04:27.520 --> 04:31.580
valuable to you to get that hands-on practice. So I look forward to seeing you
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

95
04:27.520 --> 04:31.580
valuable to you to get that hands-on practice. So I look forward to seeing you

96
04:31.580 --> 04:32.560
in another set of

97
04:32.560 --> 04:37.050
videos and until then I hope this has been informative and I'd like to thank

98
04:37.050 --> 04:38.080
you for viewing.