WEBVTT

1
00:00.000 --> 00:02.960
In this hands-on lab, here's what I'd love you to do. I'd love you to take the

2
00:02.960 --> 00:04.240
topology that we have

3
00:04.240 --> 00:09.200
and that we've been working with and enable OSPFV3 specifically for the address

4
00:09.200 --> 00:10.320
family IPv6

5
00:10.320 --> 00:14.400
as shown in that topology. Then once you implemented that and verified it, then

6
00:14.400 --> 00:14.960
like you do the

7
00:14.960 --> 00:18.540
following. I'd like you to configure area two on the right hand side of our top

8
00:18.540 --> 00:18.880
ology,

9
00:18.880 --> 00:25.670
configure it as a totally stubby area, meaning no LSA type 5s, no LSA type 4s,

10
00:25.670 --> 00:27.040
and no LSA type 3s,

11
00:27.040 --> 00:31.140
except for the default route that the area border router will advertise into
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

11
00:27.040 --> 00:31.140
except for the default route that the area border router will advertise into

12
00:31.140 --> 00:31.760
area two.

13
00:31.760 --> 00:35.060
And then once you've configured and verified that, next I'd like you to go

14
00:35.060 --> 00:36.160
ahead and summarize

15
00:36.160 --> 00:42.730
the routes in area one that begin with these 48 bits, 2001, DB8673, and

16
00:42.730 --> 00:43.840
summarize those

17
00:43.840 --> 00:48.400
before advertising any LSA type 3s up into area zero, which is not only similar

18
00:48.400 --> 00:48.880
to what we did in

19
00:48.880 --> 00:52.260
the previous video, but it is exactly what we did in the previous video. So if

20
00:52.260 --> 00:53.040
you need to refer

21
00:53.040 --> 00:56.610
back to any of the previous videos, feel free to do that. So have some fun with

22
00:56.610 --> 00:57.440
the hands on Lab

23
00:57.440 --> 01:00.720
and while you're doing that, I'm going to go ahead and reset my Lab environment
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

23
00:57.440 --> 01:00.720
and while you're doing that, I'm going to go ahead and reset my Lab environment

24
01:00.720 --> 01:02.400
to the starting point

25
01:02.400 --> 01:05.160
and then when you're done with the Lab and want to do a walkthrough of the

26
01:05.160 --> 01:06.320
solution together,

27
01:06.320 --> 01:10.640
join me in the next video. Until then, happy Labbing and I'll see you soon.