WEBVTT

1
00:00.000 --> 00:04.000
In this hands-on lab for SwitchPort Analyzer, here's what I love you to do.

2
00:04.000 --> 00:08.000
I love you to play with Switch 1, Switch 2, and set up R-Span.

3
00:08.000 --> 00:12.090
And for the requirements, I'd like you to set up Switch 2 with the source port

4
00:12.090 --> 00:13.000
of Gig 01.

5
00:13.000 --> 00:17.000
If you want to, you can specify VLAN 1 instead because that client is on VLAN 1

6
00:17.000 --> 00:17.000
,

7
00:17.000 --> 00:20.700
but that would collect all the VLAN 1 traffic and not just the traffic on that

8
00:20.700 --> 00:22.000
specific port.

9
00:22.000 --> 00:25.000
But either way is fine. If you want to do it both ways, that's also fine.

10
00:25.000 --> 00:29.000
And then for the R-Span VLAN, I like to use 999 as the R-Span VLAN.

11
00:29.000 --> 00:33.000
And then for the destination of that R-Span traffic, I'd like to have Switch 1
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

11
00:29.000 --> 00:33.000
And then for the destination of that R-Span traffic, I'd like to have Switch 1

12
00:33.000 --> 00:35.000
pull that data from VLAN 999

13
00:35.000 --> 00:38.000
and then send it out Gig 3/3.

14
00:38.000 --> 00:42.460
I'll also have as part of the skill some useful and helpful commands in config

15
00:42.460 --> 00:43.000
uring that.

16
00:43.000 --> 00:46.850
You can also review the video where we did R-Span for any tips for help as well

17
00:46.850 --> 00:47.000
.

18
00:47.000 --> 00:50.000
So that my friend is the hands-on lab. Have some fun with it.

19
00:50.000 --> 00:54.560
And when you are done and ready for a walkthrough of these tasks, join me in

20
00:54.560 --> 00:56.000
the following video.

21
00:56.000 --> 00:58.000
Meanwhile, have fun with the lab.