WEBVTT

1
00:00.000 --> 00:03.810
In this hands-on lab, it's your opportunity to do some hands-on practice. So if

2
00:03.810 --> 00:04.320
you haven't already,

3
00:04.320 --> 00:07.550
go ahead and click on the link below for the lab to launch the lab. They'll

4
00:07.550 --> 00:08.320
take a few moments

5
00:08.320 --> 00:12.380
to initialize. And while it does, here are the lab tasks. I'd like you to set

6
00:12.380 --> 00:14.320
up R8 as an IP SLA

7
00:14.320 --> 00:18.540
responder, just like we did in the demos up to this point. And then on R1, I'd

8
00:18.540 --> 00:19.120
like you to

9
00:19.120 --> 00:24.060
configure it as a probe using a 60 second frequency for the following SLAs. One

10
00:24.060 --> 00:25.520
, two, three, and four,

11
00:25.520 --> 00:30.800
one for ICMP jitter, UDP jitter, HDB and DNS. And here's the targets. It'll be
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

11
00:25.520 --> 00:30.800
one for ICMP jitter, UDP jitter, HDB and DNS. And here's the targets. It'll be

12
00:30.800 --> 00:32.880
888 for the

13
00:32.880 --> 00:37.820
ICMP and UDP jitter, one packet each, again with 60 second frequency. And then

14
00:37.820 --> 00:38.160
for three and

15
00:38.160 --> 00:43.830
four, we HTTP and DNS SLAs with the target for HDB being this URL. That's our

16
00:43.830 --> 00:45.360
server1 nug. And

17
00:45.360 --> 00:48.940
then for the DNS, we're also going to use the target of server1 nug. And the

18
00:48.940 --> 00:49.760
query will be

19
00:49.760 --> 00:54.960
PC dash one dot nugget lab dot com. And one of the benefits of the hands-on lab

20
00:54.960 --> 00:55.600
is going to help

21
00:55.600 --> 00:59.990
reinforce not just the concepts, but also what not to forget. And the thing

22
00:59.990 --> 01:01.120
that I often still
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

22
00:59.990 --> 01:01.120
that I often still

23
01:01.120 --> 01:05.510
forget to do is schedule them to start. So by using the command show IP SLA

24
01:05.510 --> 01:07.120
summary, they'll give you

25
01:07.120 --> 01:11.750
a good indicator whether or not it's running, and then show IP SLA statistics,

26
01:11.750 --> 01:12.560
your ID number,

27
01:12.560 --> 01:16.240
and then details. We'll show you all the details about those SLAs. Also have

28
01:16.240 --> 01:17.600
those helpful commands

29
01:17.600 --> 01:21.680
located in the useful command section as part of the skill if you want to refer

30
01:21.680 --> 01:22.720
to those as well.

31
01:22.720 --> 01:26.480
So have some fun with the hands-on lab. And when you are ready, join me in the

32
01:26.480 --> 01:27.040
next video,

33
01:27.040 --> 01:30.000
and we'll do a walkthrough of the lab tasks together.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

34
01:30.000 --> 01:38.120
[BLANK_AUDIO]