WEBVTT

1
00:00.000 --> 00:03.520
Now we had mentioned previously that we were waiting on our dashboard in

2
00:03.520 --> 00:07.310
sandbox environment to load up and it finally has so let's go ahead and take a

3
00:07.310 --> 00:09.000
look at what's actually going on.

4
00:09.000 --> 00:13.580
Now as you can see on the screen here we're loaded up in what looks to be a

5
00:13.580 --> 00:18.150
very realistic scenario inside of our web browser and this is what it's going

6
00:18.150 --> 00:20.000
to look like in a real world environment.

7
00:20.000 --> 00:23.250
Now I bring that up because there are a couple of things that we really need to

8
00:23.250 --> 00:25.000
point out here before we continue.

9
00:25.000 --> 00:30.130
First and foremost here is that platform as a service gives us an application
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

9
00:25.000 --> 00:30.130
First and foremost here is that platform as a service gives us an application

10
00:30.130 --> 00:35.300
level but you may be thinking that this is in a web browser so it's software as

11
00:35.300 --> 00:36.000
a service.

12
00:36.000 --> 00:40.600
Well this is just for us to be able to access what's actually going on to be

13
00:40.600 --> 00:45.000
able to experiment inside of our Cisco platform as a service model.

14
00:45.000 --> 00:50.170
Now remember we went with the catalyst center sandbox to be able to demonstrate

15
00:50.170 --> 00:55.450
some basic things that we normally do inside of the Cisco world but I want to

16
00:55.450 --> 01:00.620
point out that when it cranks up you're going to have your four devices that
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

16
00:55.450 --> 01:00.620
point out that when it cranks up you're going to have your four devices that

17
01:00.620 --> 01:07.000
are inside of the sandbox environment to simulate management at that network

18
01:07.000 --> 01:08.000
technician level.

19
01:08.000 --> 01:13.020
So what we want to do is be able to access these systems through their web

20
01:13.020 --> 01:18.710
prompts because remember we're simulating the PAS and not actually having it on

21
01:18.710 --> 01:20.000
site with us.

22
01:20.000 --> 01:24.520
Now you may be wondering how do we access these through their actual web

23
01:24.520 --> 01:31.200
addresses glad you asked because inside of this lab here matter fact let me
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

23
01:24.520 --> 01:31.200
addresses glad you asked because inside of this lab here matter fact let me

24
01:31.200 --> 01:37.000
move my camera over just a little bit so I could show you.

25
01:37.000 --> 01:41.880
Because we're going to see if I can look right at it as we're going to it there

26
01:41.880 --> 01:46.260
's a quick link icon that I just click on that allows us to be able to go

27
01:46.260 --> 01:54.500
through and see some web or VPN information sorry it's like trying to walk it

28
01:54.500 --> 01:56.000
to bubble gum at the same time here.

29
01:56.000 --> 02:00.350
We have a VPN address VPN username and VPN password now normally if you've been
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

29
01:56.000 --> 02:00.350
We have a VPN address VPN username and VPN password now normally if you've been

30
02:00.350 --> 02:04.620
in my courses before you'll know that I have very big issue showing passwords

31
02:04.620 --> 02:06.000
and stuff like this.

32
02:06.000 --> 02:09.540
In this particular case I don't because the labs about to shut down when I'm

33
02:09.540 --> 02:12.850
done with the skill and when I crank up another one it'll generate a new

34
02:12.850 --> 02:17.860
username password that's where to fact multifactor authentication might come in

35
02:17.860 --> 02:21.740
handy in case some of you out there were to try to get my lab after this is

36
02:21.740 --> 02:26.000
published right in here for stuff later right.

37
02:26.000 --> 02:31.430
Now this VPN address that we're going to copy here we're going to utilize and I
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

37
02:26.000 --> 02:31.430
Now this VPN address that we're going to copy here we're going to utilize and I

38
02:31.430 --> 02:36.000
'm going to open it up and drag it over Cisco any connect I have it.

39
02:36.000 --> 02:40.370
It's not visible on screen let me see if I can fix that here momentarily you're

40
02:40.370 --> 02:45.030
going to input the information and hit on connect for that web address and it's

41
02:45.030 --> 02:49.000
going to utilize the username and password that you see there on the screen.

42
02:49.000 --> 02:55.570
E-Coron and then our VPN password that I can easily copy and then put inside of

43
02:55.570 --> 02:58.000
our web connect address.

44
02:58.000 --> 03:07.360
Gonna click OK it's going to connect and there we go for a second it's still
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

44
02:58.000 --> 03:07.360
Gonna click OK it's going to connect and there we go for a second it's still

45
03:07.360 --> 03:08.000
loading up.

46
03:08.000 --> 03:11.790
And you may have just heard that in the background and that was Cisco any

47
03:11.790 --> 03:15.510
connect being able to open up now give me one second I want to show you a

48
03:15.510 --> 03:18.000
different window here to demonstrate what just happened.

49
03:18.000 --> 03:24.200
In our command prompt inside windows I'm just going to do a simple IP config

50
03:24.200 --> 03:29.680
scroll up and show you that we just VPN inside of the lab dot devnet sandbox

51
03:29.680 --> 03:31.000
dot local network.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

51
03:29.680 --> 03:31.000
dot local network.

52
03:31.000 --> 03:34.970
The reason I'm pointing this out is because this is the actual VPN connection

53
03:34.970 --> 03:40.630
that allowed us to be able to go inside our system here in our demonstration

54
03:40.630 --> 03:44.000
mode to be able to go through and connect on the web interface.

55
03:44.000 --> 03:49.840
Because some of these devices as I swap back over to our sandbox environment

56
03:49.840 --> 03:54.000
are going to have a address for us to be able to go into.

57
03:54.000 --> 03:57.580
I do want to click let me move my little window over a little bit so you can

58
03:57.580 --> 03:59.000
see and I'll look over.

59
03:59.000 --> 04:03.690
I should be looking at it now where I'm clicking back on instructions and then
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

59
03:59.000 --> 04:03.690
I should be looking at it now where I'm clicking back on instructions and then

60
04:03.690 --> 04:09.110
you can scroll down in there under access details and be able to see where we

61
04:09.110 --> 04:11.000
have and I'm going to highlight here.

62
04:11.000 --> 04:17.600
The username passwords and IP addresses for us to be able to get into these

63
04:17.600 --> 04:20.000
systems now very briefly.

64
04:20.000 --> 04:24.860
This is just a information inside of this lab environment so when we go back

65
04:24.860 --> 04:29.750
and take a look at our IP address that we got from the VPN side that should be

66
04:29.750 --> 04:34.250
full explanation of what's actually going on because you can ping those IP
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

66
04:29.750 --> 04:34.250
full explanation of what's actually going on because you can ping those IP

67
04:34.250 --> 04:38.000
addresses from your windows command prompt now that your VPN.

68
04:38.000 --> 04:42.940
So the first one that I want to go into is our DNA center and we're going to

69
04:42.940 --> 04:48.400
type that into the address bar and use our credentials of admin and Cisco 123

70
04:48.400 --> 04:51.000
for explanation point very simply.

71
04:51.000 --> 04:55.890
I'm just opening up another window here or tab inside of my browser and it's

72
04:55.890 --> 05:00.760
going to take a second to load you may get an error that says not trusted and
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

72
04:55.890 --> 05:00.760
going to take a second to load you may get an error that says not trusted and

73
05:00.760 --> 05:07.000
that's because the certificate for this particular site has not been put in our

74
05:07.000 --> 05:07.000
.

75
05:07.000 --> 05:11.820
certificate authority for the local system that's okay as long as you

76
05:11.820 --> 05:16.850
understand what's going on it's it's okay to go into and I already input my

77
05:16.850 --> 05:23.000
credentials but it is that Cisco and admin 123 for pound and this is the.

78
05:23.000 --> 05:27.550
So this is a place where we come back to to show all of our network here now

79
05:27.550 --> 05:32.280
there's not much of a network actually going on but this is where this this
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

79
05:27.550 --> 05:32.280
there's not much of a network actually going on but this is where this this

80
05:32.280 --> 05:37.430
platform right here this application would be available to us developers to be

81
05:37.430 --> 05:43.120
able to go through maintain and also implement configuration and security for

82
05:43.120 --> 05:48.000
those different devices throughout our organization and as you can see we have

83
05:48.000 --> 05:49.000
four network devices.

84
05:49.000 --> 05:55.500
One network profile one Cisco DNA license device or four of them my mistake and

85
05:55.500 --> 06:01.600
you and the reason that we have an error warning on this is because we're in
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

85
05:55.500 --> 06:01.600
you and the reason that we have an error warning on this is because we're in

86
06:01.600 --> 06:07.000
sandbox mode so if this is just a health summary of what's actually going to be

87
06:07.000 --> 06:10.230
coming on here pretty soon and as you can see up here at the top this is what

88
06:10.230 --> 06:15.420
confused me for a second Cisco DNA center is becoming catalyst center and that

89
06:15.420 --> 06:17.000
's why we're in catalyst center.

90
06:17.000 --> 06:21.090
And I'm going to go to the top left and click on the three little lines there

91
06:21.090 --> 06:25.120
and open up our menu to be able to go through and browse some of the options

92
06:25.120 --> 06:32.000
that we have available for us and I'm going to go inside of tools and show you
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

92
06:25.120 --> 06:32.000
that we have available for us and I'm going to go inside of tools and show you

93
06:32.000 --> 06:36.000
here that there's a couple of different things that we can do we can develop a

94
06:36.000 --> 06:41.200
topology dude system or network discovery but more importantly I want to go in

95
06:41.200 --> 06:44.000
template of.

96
06:44.000 --> 06:48.120
And first that's just the border lane to the new what it's going to be called

97
06:48.120 --> 06:52.180
in the future and this allows us to be able to go through and not only look at

98
06:52.180 --> 06:57.620
templates but also configure those templates and be able to base it off of

99
06:57.620 --> 07:02.000
different network devices and profiles that we have within the organization.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

99
06:57.620 --> 07:02.000
different network devices and profiles that we have within the organization.

100
07:02.000 --> 07:07.080
These are the ones that are loaded up inside the by default inside of our data

101
07:07.080 --> 07:12.010
catalyst center here inside of our sandbox and we'll be going through and

102
07:12.010 --> 07:17.340
taking a look at these in more detail as the skill unfolds primarily I wanted

103
07:17.340 --> 07:20.990
to show you that and how to be able to get into it because this is provides us

104
07:20.990 --> 07:26.270
a hands on in order to be able to understand how platform as a service works

105
07:26.270 --> 07:28.000
inside of our Cisco environment.

106
07:28.000 --> 07:33.790
We're able to take an application that's going to be available to us to manage
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

106
07:28.000 --> 07:33.790
We're able to take an application that's going to be available to us to manage

107
07:33.790 --> 07:39.090
our network devices for those people and users and data that's across our

108
07:39.090 --> 07:43.210
organization and it gives us more controlled implement security as we start

109
07:43.210 --> 07:44.000
moving forward.

110
07:44.000 --> 07:44.580
we inform.
