WEBVTT

1
00:00.000 --> 00:08.000
Hello, and welcome to Configure Native IPsec VPN to GCP.

2
00:08.000 --> 00:12.970
In this skill, we're going to be going over the steps necessary to connect our

3
00:12.970 --> 00:14.000
iOS XE

4
00:14.000 --> 00:19.480
based router to the Google Cloud Native VPN gateway.

5
00:19.480 --> 00:24.360
To do this, we're going to have to create a few components in GCP.

6
00:24.360 --> 00:30.370
First we'll start by creating a VPC and a corresponding IP subnet so that we
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

6
00:24.360 --> 00:30.370
First we'll start by creating a VPC and a corresponding IP subnet so that we

7
00:30.370 --> 00:30.920
have something

8
00:30.920 --> 00:37.200
to actually reach across this tunnel, specifically a subnet for our servers.

9
00:37.200 --> 00:42.240
Then we'll create the VPN itself, which includes not only the parameters for

10
00:42.240 --> 00:43.800
the VPN, but also

11
00:43.800 --> 00:45.800
the peer gateway.

12
00:45.800 --> 00:50.360
Then we'll deploy an actual server into this server subnet so that we have

13
00:50.360 --> 00:51.200
something to

14
00:51.200 --> 00:54.600
actually test our connectivity.

15
00:54.600 --> 00:59.800
We'll be configuring iOS XE itself to finish the other side of the tunnel.

16
00:59.800 --> 01:03.770
Of course, once that's up, we'll be doing verification to make sure we have
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

16
00:59.800 --> 01:03.770
Of course, once that's up, we'll be doing verification to make sure we have

17
01:03.770 --> 01:05.120
full reachability

18
01:05.120 --> 01:07.600
across our IPsec tunnel.

19
01:07.600 --> 01:10.280
As you can hear, we have a lot of really fun stuff to cover.

20
01:10.280 --> 01:11.680
Let's go ahead and jump in.

21
01:11.680 --> 01:13.880
I'll see you in the next video.

22
01:13.880 --> 01:29.960
[silence]