WEBVTT

1
00:00.000 --> 00:07.880
So now that we have all of our definitions created, everything's tied together.

2
00:07.880 --> 00:13.040
The next step is simply to put the nodes into our topology and connect them

3
00:13.040 --> 00:13.560
into the rest

4
00:13.560 --> 00:15.000
of our network.

5
00:15.000 --> 00:20.720
This is as simple now as it is to deploy any other node in CML.

6
00:20.720 --> 00:24.220
So let's just go ahead and jump in, take a look at how we want these deployed

7
00:24.220 --> 00:25.000
and connected

8
00:25.000 --> 00:28.160
in our network.

9
00:28.160 --> 00:33.120
So we'll begin here in our normal topology and we'll add our new nodes.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

9
00:28.160 --> 00:33.120
So we'll begin here in our normal topology and we'll add our new nodes.

10
00:33.120 --> 00:35.720
So we'll come up here to add a node.

11
00:35.720 --> 00:38.880
Notice that now we have a Viptela VManage.

12
00:38.880 --> 00:43.080
So we can drag this out and put this on our topology.

13
00:43.080 --> 00:47.000
We'll go ahead and highlight it and let's talk about a few of these settings.

14
00:47.000 --> 00:51.360
First, notice that it called it VManage-0.

15
00:51.360 --> 00:55.410
That's because of that whole prefix thing and it's going to enumerate new

16
00:55.410 --> 00:56.320
instances.

17
00:56.320 --> 01:00.530
Now I'm not going to be deploying more than one, so I'm simply going to rename
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

17
00:56.320 --> 01:00.530
Now I'm not going to be deploying more than one, so I'm simply going to rename

18
01:00.530 --> 01:01.000
it here

19
01:01.000 --> 01:03.720
to just VManage.

20
01:03.720 --> 01:08.830
And the other thing to note is remember we talked in the previous video about

21
01:08.830 --> 01:09.400
having

22
01:09.400 --> 01:15.120
different versions of code that we could run on these nodes if we want to.

23
01:15.120 --> 01:17.720
This is here under image definition.

24
01:17.720 --> 01:22.750
Now the default is automatic, but if we click on the drop down here, we can see

25
01:22.750 --> 01:23.280
where if

26
01:23.280 --> 01:28.250
we had multiple different versions of code installed, we could choose here

27
01:28.250 --> 01:29.240
which version

28
01:29.240 --> 01:31.960
this VManage is going to run.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

28
01:29.240 --> 01:31.960
this VManage is going to run.

29
01:31.960 --> 01:36.440
Since we only have one, we can of course just leave it on automatic.

30
01:36.440 --> 01:41.480
The next thing we want to do is add a few connections here to VManage.

31
01:41.480 --> 01:46.390
First, we'll right click, we'll say add a link and we're going to add this to

32
01:46.390 --> 01:46.760
our

33
01:46.760 --> 01:48.920
headquarter switch.

34
01:48.920 --> 01:54.370
This is going to go from our ETH-0 to headquarter switch and really you could

35
01:54.370 --> 01:55.880
use any interface,

36
01:55.880 --> 02:03.360
but I have this pre-configured to use interface gigabit E3/0.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

36
01:55.880 --> 02:03.360
but I have this pre-configured to use interface gigabit E3/0.

37
02:03.360 --> 02:07.640
We'll go ahead and create the link and we need another link.

38
02:07.640 --> 02:10.440
This one is going to go over to our management switch.

39
02:10.440 --> 02:13.700
If you're not using a management switch, of course, just connect this to

40
02:13.700 --> 02:14.320
whatever you

41
02:14.320 --> 02:16.520
are using for management.

42
02:16.520 --> 02:20.730
But this is going to be the VManage ETH-1 and of course it's going to go to

43
02:20.730 --> 02:22.200
whatever port

44
02:22.200 --> 02:27.840
on your management switch or management cloud that you wish to connect it to.

45
02:27.840 --> 02:29.240
We'll hit create link.

46
02:29.240 --> 02:33.540
We'll also move this up a little bit just to get it out of the way a bit and
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

46
02:29.240 --> 02:33.540
We'll also move this up a little bit just to get it out of the way a bit and

47
02:33.540 --> 02:34.280
then we'll

48
02:34.280 --> 02:36.240
create our VBond.

49
02:36.240 --> 02:39.280
Once again, we go back to node selection.

50
02:39.280 --> 02:40.800
We grab the VBond.

51
02:40.800 --> 02:42.960
We'll bring it out here.

52
02:42.960 --> 02:49.690
Just like before, we'll just rename this to VBond and for the connection, we're

53
02:49.690 --> 02:50.040
simply

54
02:50.040 --> 02:54.000
going to connect this to switch 1 again in our headquarters.

55
02:54.000 --> 02:59.280
Now this is important because this is ultimately going to be our VPN-0

56
02:59.280 --> 03:00.440
interface.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

56
02:59.280 --> 03:00.440
interface.

57
03:00.440 --> 03:05.810
So rather than ETH-0, which is for management, we're going to want this to be

58
03:05.810 --> 03:07.040
gig-0-0.

59
03:07.040 --> 03:10.880
Now again on the switch, you could connect to whatever port you want to.

60
03:10.880 --> 03:15.240
I've simply again set it up to connect support 3-1.

61
03:15.240 --> 03:17.040
We'll hit create link.

62
03:17.040 --> 03:21.350
Optionally by the way, you can also connect these out to the regular management

63
03:21.350 --> 03:22.200
network.

64
03:22.200 --> 03:26.660
However, I'm going to simply be accessing these through the console and I will

65
03:26.660 --> 03:27.040
show

66
03:27.040 --> 03:29.160
you how to do that.

67
03:29.160 --> 03:32.600
Once again, we'll sort of move this out of the way a little bit and finally we
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

67
03:29.160 --> 03:32.600
Once again, we'll sort of move this out of the way a little bit and finally we

68
03:32.600 --> 03:33.080
'll add

69
03:33.080 --> 03:35.000
our VSmart.

70
03:35.000 --> 03:37.560
Just like before, we'll rename it.

71
03:37.560 --> 03:42.720
Also we're going to add a link and this is going to also be to our headquarters

72
03:42.720 --> 03:43.180
switch.

73
03:43.180 --> 03:46.680
This is going to be the ETH-0 interface.

74
03:46.680 --> 03:49.520
And again, I have this set up to connect to 3-2.

75
03:49.520 --> 03:52.360
We'll hit create link.

76
03:52.360 --> 03:57.720
And now we have our three controllers deployed into our environment and

77
03:57.720 --> 03:58.560
connected to the

78
03:58.560 --> 04:00.840
appropriate switches.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

78
03:58.560 --> 04:00.840
appropriate switches.

79
04:00.840 --> 04:05.660
Once again, you could connect VBond and VSmart to your normal management

80
04:05.660 --> 04:06.560
network.

81
04:06.560 --> 04:08.960
However, it's not necessary.

82
04:08.960 --> 04:12.880
We're not going to be configuring them that much.

83
04:12.880 --> 04:16.720
So this leaves us with really only one step to perform.

84
04:16.720 --> 04:21.510
Booting these up, making sure that they boot the correct version of code and

85
04:21.510 --> 04:22.000
that they

86
04:22.000 --> 04:23.360
have the correct interfaces.

87
04:23.360 --> 04:25.560
It's exactly what we're going to do next.

88
04:25.560 --> 04:33.580
[BLANK_AUDIO]