WEBVTT 1 00:00.000 --> 00:08.120 So in this challenge, the first thing that we're tasked with is creating a 2 00:08.120 --> 00:09.440 custom node 3 00:09.440 --> 00:13.280 definition for our V edge routers. 4 00:13.280 --> 00:18.900 So to do that, we go to tools, node and image definitions, and we can either 5 00:18.900 --> 00:20.920 add or import. 6 00:20.920 --> 00:25.320 Now since we're just going over the solution, I'm just going to do an import. 7 00:25.320 --> 00:29.640 I'll import our file and go to the node definition. 8 00:29.640 --> 00:34.360 So whether you imported or created a new one, you should still end up at this WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 8 00:29.640 --> 00:34.360 So whether you imported or created a new one, you should still end up at this 9 00:34.360 --> 00:35.920 same place. 10 00:35.920 --> 00:40.280 We verify that our ID is set correctly, our description. 11 00:40.280 --> 00:43.440 Remember the nature has to be router. 12 00:43.440 --> 00:46.000 Then we scroll down. 13 00:46.000 --> 00:50.400 Most of this should be the same as the other devices we deployed. 14 00:50.400 --> 00:54.570 But the main thing we're looking at here that's going to be different is the 15 00:54.570 --> 00:55.520 interfaces. 16 00:55.520 --> 01:01.000 In this case, we're actually going to put six interfaces on this device. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 16 00:55.520 --> 01:01.000 In this case, we're actually going to put six interfaces on this device. 17 01:01.000 --> 01:07.000 Now interface zero is still going to be E. zero, but then interfaces one 18 01:07.000 --> 01:08.760 through five are going 19 01:08.760 --> 01:14.240 to be gigabit zero slash zero through gigabit zero slash four. 20 01:14.240 --> 01:16.840 So that's the primary difference here. 21 01:16.840 --> 01:22.400 The next thing we have to do is also define a custom image. 22 01:22.400 --> 01:27.600 So now let's go back to our tools, node and image definitions. 23 01:27.600 --> 01:30.790 While we're here, we can scroll down and make sure that our V edge router is WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 23 01:27.600 --> 01:30.790 While we're here, we can scroll down and make sure that our V edge router is 24 01:30.790 --> 01:31.280 here, which 25 01:31.280 --> 01:33.720 it is, we'll scroll back up. 26 01:33.720 --> 01:36.200 We'll go to image definitions. 27 01:36.200 --> 01:38.800 We'll add a new image definition. 28 01:38.800 --> 01:43.560 We'll put in the necessary parameters for the ID, the label and the description 29 01:43.560 --> 01:43.720 for the 30 01:43.720 --> 01:44.880 disk image. 31 01:44.880 --> 01:47.480 We'll choose our edge image. 32 01:47.480 --> 01:52.360 For the node definition, we will choose the tele edge. 33 01:52.360 --> 01:53.600 Anything else here is correct. 34 01:53.600 --> 01:56.280 We'll say create image definition. 35 01:56.280 --> 02:00.960 Now that all of that's created, we should be able to go back into our lab. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 35 01:56.280 --> 02:00.960 Now that all of that's created, we should be able to go back into our lab. 36 02:00.960 --> 02:05.800 And our next task was to deploy a V edge device. 37 02:05.800 --> 02:09.360 So we'll simply put a V edge device on our topology. 38 02:09.360 --> 02:11.760 We're told we don't have to connect it to anything. 39 02:11.760 --> 02:15.480 We can also just leave it named V edge dash zero. 40 02:15.480 --> 02:17.960 This is something we may add multiples of. 41 02:17.960 --> 02:21.480 So leaving the dash zero on this might make sense. 42 02:21.480 --> 02:23.800 And then we are to start this up. 43 02:23.800 --> 02:28.280 So we'll start this node and then let's connect to its console. 44 02:28.280 --> 02:30.480 So here in the console, we see it booting up. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 44 02:28.280 --> 02:30.480 So here in the console, we see it booting up. 45 02:30.480 --> 02:35.080 We'll give it just a minute to complete and give us the system ready. 46 02:35.080 --> 02:36.840 So now we have our system ready. 47 02:36.840 --> 02:38.440 We'll go ahead and log in. 48 02:38.440 --> 02:42.520 Again, it's going to fail the first time because of my login script. 49 02:42.520 --> 02:47.690 So once we log in and reset our password, the main thing we want to see here is 50 02:47.690 --> 02:48.200 the show 51 02:48.200 --> 02:53.400 interface and what we're looking for is notice here we have our gigabit zero 52 02:53.400 --> 02:54.040 zero, 53 02:54.040 --> 03:00.260 gigabit zero one, gigabit zero two, down here at the bottom is gigabit zero WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 53 02:54.040 --> 03:00.260 gigabit zero one, gigabit zero two, down here at the bottom is gigabit zero 54 03:00.260 --> 03:01.400 three. 55 03:01.400 --> 03:04.360 Here we have gigabit zero four. 56 03:04.360 --> 03:10.920 And finally our ethernet interface, which is part of VPN 512 for management. 57 03:10.920 --> 03:14.760 So now we see this is up and running working the way we want it to. 58 03:14.760 --> 03:19.400 The final step of the challenge is to shut this down and take it back out of 59 03:19.400 --> 03:20.200 our topology 60 03:20.200 --> 03:23.960 because we're not actually going to be using this right now. 61 03:23.960 --> 03:26.760 So let's switch back over to CML. 62 03:26.760 --> 03:32.040 What we need to do to shut this down is we simply right click on it, say stop. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 62 03:26.760 --> 03:32.040 What we need to do to shut this down is we simply right click on it, say stop. 63 03:32.040 --> 03:36.840 Then we right click notice delete is grayed out. 64 03:36.840 --> 03:41.000 We first have to wipe the node before we can actually delete it. 65 03:41.000 --> 03:42.520 We have to confirm it. 66 03:42.520 --> 03:44.520 And then we can actually delete it. 67 03:44.520 --> 03:49.560 Now we will leave both of our definitions in our database here, 68 03:49.560 --> 03:55.080 just in case we do choose to deploy a V edge router in a future lab. 69 03:55.080 --> 04:01.680 But for now that completes this challenge, which means you've also completed WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 69 03:55.080 --> 04:01.680 But for now that completes this challenge, which means you've also completed 70 04:01.680 --> 04:02.280 this skill. 71 04:02.280 --> 04:07.880 So congratulations on completing prepare our lab for SD-WAN. 72 04:08.440 --> 04:12.760 I hope this has been informative for you and I'd like to thank you for viewing.