WEBVTT

1
00:00.000 --> 00:07.000
Hello and welcome to configure our SDWAN environment.

2
00:07.000 --> 00:12.990
In this skill, we will be picking up where we left off in our preparing our lab

3
00:12.990 --> 00:14.000
for SDWAN

4
00:14.000 --> 00:15.000
skill.

5
00:15.000 --> 00:18.650
So if you have not yet completed that skill, I would encourage you to go back

6
00:18.650 --> 00:19.000
and do that

7
00:19.000 --> 00:24.000
first so that you have the stuff we need for this skill already configured.

8
00:24.000 --> 00:29.220
What we are going to be doing in this skill is first we are going to go to

9
00:29.220 --> 00:31.000
Cisco's licensing portal
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

9
00:29.220 --> 00:31.000
Cisco's licensing portal

10
00:31.000 --> 00:36.400
and we are going to create a network plug and play file so that we can add our

11
00:36.400 --> 00:39.000
devices into our SDWAN environment.

12
00:39.000 --> 00:45.740
Then we are going to move on and configure our baselines and IP connectivity on

13
00:45.740 --> 00:47.000
our VManage,

14
00:47.000 --> 00:50.000
VBond and VSmart servers.

15
00:50.000 --> 00:54.000
Finally, we are going to set up our certificates.

16
00:54.000 --> 00:57.510
Specifically, we are going to set up our root certificate chain and we are

17
00:57.510 --> 01:00.000
going to be using our VManage server
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

18
01:00.000 --> 01:03.000
as our certificate root authority.

19
01:03.000 --> 01:06.000
So as you can hear, we have a lot of stuff to do.

20
01:06.000 --> 01:08.000
Let's jump in and get started.

21
01:08.000 --> 01:10.000
I will see you in the next video.