WEBVTT

1
00:00.000 --> 00:08.320
Hello and welcome to configure our controllers and edge devices.

2
00:08.320 --> 00:14.240
This skill builds on the skill before configure our SD-WAN environment.

3
00:14.240 --> 00:18.320
So if you have not yet completed that skill, I would strongly encourage you to

4
00:18.320 --> 00:18.920
go complete

5
00:18.920 --> 00:23.280
that one before attempting the tasks in this skill.

6
00:23.280 --> 00:26.960
What we're going to be doing in this skill is we're going to be adding our

7
00:26.960 --> 00:27.800
controllers

8
00:27.800 --> 00:33.590
into our vManage environment and issuing certificates for their proper
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

8
00:27.800 --> 00:33.590
into our vManage environment and issuing certificates for their proper

9
00:33.590 --> 00:35.200
communication.

10
00:35.200 --> 00:41.330
Once that's done, we're going to move on to configuring our VPN0 interface as a

11
00:41.330 --> 00:41.960
tunnel

12
00:41.960 --> 00:48.200
and verify that it is then properly communicating with our vManage server.

13
00:48.200 --> 00:51.880
And finally, we get to the part we've been waiting for.

14
00:51.880 --> 00:58.560
We get to add the catalyst 8000v as an edge device into our environment.

15
00:58.560 --> 01:02.850
So we will be taking our on-prem router one, which is currently operating in
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

15
00:58.560 --> 01:02.850
So we will be taking our on-prem router one, which is currently operating in

16
01:02.850 --> 01:03.640
autonomous

17
01:03.640 --> 01:08.640
mode, converting that over to controller mode and joining it into our

18
01:08.640 --> 01:09.880
environment.

19
01:09.880 --> 01:12.360
So we have a lot of fun stuff to do here.

20
01:12.360 --> 01:14.320
Let's go ahead and get started.

21
01:14.320 --> 01:16.440
I'll see you in the next video.

22
01:16.440 --> 01:24.760
[BLANK_AUDIO]