WEBVTT

1
00:00.000 --> 00:10.380
Hello, and welcome to preparing and building our lab with CML 2.7 and up.

2
00:10.380 --> 00:14.760
In this skill, we're going to be covering some of the really cool changes that

3
00:14.760 --> 00:15.200
Cisco

4
00:15.200 --> 00:21.420
has made to CML, specifically starting with version 2.7.

5
00:21.420 --> 00:28.740
With this release, what Cisco has done is they added image and no definitions

6
00:28.740 --> 00:29.320
for SD

7
00:29.320 --> 00:30.800
WAN equipment.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

7
00:29.320 --> 00:30.800
WAN equipment.

8
00:30.800 --> 00:36.340
So what we're going to be looking at in this skill is how to deploy those SD W

9
00:36.340 --> 00:37.360
AN nodes

10
00:37.360 --> 00:39.680
into our topology.

11
00:39.680 --> 00:44.490
Then we're going to take a look at booting and verifying those image versions

12
00:44.490 --> 00:44.880
to make

13
00:44.880 --> 00:47.480
sure that they function properly.

14
00:47.480 --> 00:52.400
We're actually going to have an issue here that we're going to have to correct.

15
00:52.400 --> 00:58.060
Then we're going to configure our baseline configuration and IP connectivity to

16
00:58.060 --> 00:58.480
get these

17
00:58.480 --> 01:01.120
devices talking to each other.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

17
00:58.480 --> 01:01.120
devices talking to each other.

18
01:01.120 --> 01:06.490
We're going to then add our controllers, issue client-based certificates, and

19
01:06.490 --> 01:07.720
then finally

20
01:07.720 --> 01:13.280
add our Cisco 8000V edge devices into our topology.

21
01:13.280 --> 01:17.430
So as you can see, we have a whole lot of really cool stuff to cover here,

22
01:17.430 --> 01:18.120
really just

23
01:18.120 --> 01:23.320
adding and updating what we've covered in the last couple skills.

24
01:23.320 --> 01:25.200
So let's go ahead and get started.

25
01:25.200 --> 01:27.760
I'll see you in the next video.