WEBVTT

1
00:00.000 --> 00:07.770
So in this challenge, we're told to make a couple changes to our templates and

2
00:07.770 --> 00:08.780
or make

3
00:08.780 --> 00:10.520
some new templates.

4
00:10.520 --> 00:14.900
So the very first task is to set a login banner.

5
00:14.900 --> 00:19.920
Now for this, we're going to here on our device template, we're going to go

6
00:19.920 --> 00:20.440
into edit and

7
00:20.440 --> 00:25.120
we're going to scroll down here to the additional templates section.

8
00:25.120 --> 00:29.390
Then what we're going to do is under Cisco banner, we're going to create a

9
00:29.390 --> 00:30.220
template.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

9
00:29.390 --> 00:30.220
template.

10
00:30.220 --> 00:32.720
We can call this whatever we want.

11
00:32.720 --> 00:37.000
All those call it banner config for the description.

12
00:37.000 --> 00:39.400
We'll call it login banner.

13
00:39.400 --> 00:45.080
Then under login banner, we'll say global and we'll either type or paste in the

14
00:45.080 --> 00:45.780
message

15
00:45.780 --> 00:48.220
that we're supposed to configure.

16
00:48.220 --> 00:51.940
Then we'll hit save and we'll hit update.

17
00:51.940 --> 00:57.920
There's no variables to add for this, so we'll just hit next, configure devices

18
00:57.920 --> 00:58.860
, confirm

19
00:58.860 --> 01:00.420
and go.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

19
00:58.860 --> 01:00.420
and go.

20
01:00.420 --> 01:06.540
Once this is complete, we'll go back and we should be ready to tackle our next

21
01:06.540 --> 01:06.900
task.

22
01:06.900 --> 01:12.500
Next we were supposed to configure the priority for VRRP.

23
01:12.500 --> 01:16.300
So for this, we're going to want to go to the feature templates.

24
01:16.300 --> 01:21.020
Specifically, this is for gigabit ethernet 2.10.

25
01:21.020 --> 01:27.010
So for gigabit ethernet 2.10, we need to click on the extended menu and say

26
01:27.010 --> 01:27.700
edit.

27
01:27.700 --> 01:33.430
Here we'll scroll down to the VRRP section and we'll edit our VRRP
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

27
01:27.700 --> 01:33.430
Here we'll scroll down to the VRRP section and we'll edit our VRRP

28
01:33.430 --> 01:35.220
configuration.

29
01:35.220 --> 01:40.620
Here we're going to change the priority to be device specific.

30
01:40.620 --> 01:48.060
Once again, we'll customize the key to be gig 2.10 and we'll hit save changes.

31
01:48.060 --> 01:53.480
Once we hit update, notice once again, we have gray X's which means we now have

32
01:53.480 --> 01:54.140
a field

33
01:54.140 --> 01:55.540
to fill out.

34
01:55.540 --> 02:00.020
Now it's not shown on the page, so we're going to have to scroll to the side.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

34
01:55.540 --> 02:00.020
Now it's not shown on the page, so we're going to have to scroll to the side.

35
02:00.020 --> 02:05.630
Here's the new field we have to fill out and our task tells us for the priority

36
02:05.630 --> 02:06.340
for router

37
02:06.340 --> 02:11.740
1, we're supposed to set this to a priority of 1.10.

38
02:11.740 --> 02:15.860
For router 2, we're supposed to make it 90.

39
02:15.860 --> 02:18.580
Now we have our two green checks.

40
02:18.580 --> 02:25.340
So let's hit next configure devices, confirm and go.

41
02:25.340 --> 02:26.620
Once again, it's successful.

42
02:26.620 --> 02:28.220
Let's go back.

43
02:28.220 --> 02:32.890
And the last thing we're to configure is we're supposed to make a change to OSP
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

43
02:28.220 --> 02:32.890
And the last thing we're to configure is we're supposed to make a change to OSP

44
02:32.890 --> 02:32.940
F.

45
02:32.940 --> 02:36.260
We're supposed to apply a router ID.

46
02:36.260 --> 02:39.740
So once again, we need to go back to feature templates.

47
02:39.740 --> 02:43.420
We're supposed to do this for VPN 10.

48
02:43.420 --> 02:47.180
So this is going to be OSPF for VPN 10.

49
02:47.180 --> 02:50.020
We'll edit here on the router ID.

50
02:50.020 --> 02:53.180
We will set this to device specific.

51
02:53.180 --> 02:55.580
We'll again modify the key for this.

52
02:55.580 --> 02:57.980
What I usually just put the VPN at the end.

53
02:57.980 --> 03:02.940
So OSPF router ID VPN 10.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

53
02:57.980 --> 03:02.940
So OSPF router ID VPN 10.

54
03:02.940 --> 03:05.060
And again, we hit update.

55
03:05.060 --> 03:07.940
Once again, we're going to have fields to fill in.

56
03:07.940 --> 03:10.620
So here's our OSPF router ID.

57
03:10.620 --> 03:15.580
And we were told to make this the same as the loopback interface.

58
03:15.580 --> 03:24.820
So in this case, that would be 10.100.1.1 and for router 2, 10.100.1.2.

59
03:24.820 --> 03:30.980
We'll hit next configure devices, confirm and hit OK.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

59
03:24.820 --> 03:30.980
We'll hit next configure devices, confirm and hit OK.

60
03:30.980 --> 03:35.610
So now that this has been successfully deployed to both of our routers, let's

61
03:35.610 --> 03:35.980
jump into the

62
03:35.980 --> 03:39.460
command line and take a look at the changes.

63
03:39.460 --> 03:45.200
So the first thing we should note as soon as we SSH into router 1, notice we

64
03:45.200 --> 03:45.740
immediately

65
03:45.740 --> 03:50.780
get our banner authorized access only unauthorized access will be prosecuted to

66
03:50.780 --> 03:51.700
the fullest extent

67
03:51.700 --> 03:52.700
of the law.

68
03:52.700 --> 03:55.940
So our banner definitely worked.

69
03:55.940 --> 04:00.300
Also we'll jump into routing context for VRF 10 here.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

69
03:55.940 --> 04:00.300
Also we'll jump into routing context for VRF 10 here.

70
04:00.300 --> 04:02.740
Let's do our show VRRP.

71
04:02.740 --> 04:06.950
The main thing we're looking for here, of course, is that the priority on

72
04:06.950 --> 04:07.940
router 1 is

73
04:07.940 --> 04:10.300
now set to 110.

74
04:10.300 --> 04:16.930
Now if we do a show IPOS PF, notice that the router ID here on router 1 is

75
04:16.930 --> 04:22.340
still 204.186.19.10.

76
04:22.340 --> 04:26.460
That's because it grabbed that interface when OSPF started and used that for

77
04:26.460 --> 04:27.060
the routing

78
04:27.060 --> 04:28.420
ID.

79
04:28.420 --> 04:33.060
When you change the router ID on OSPF, that won't actually take effect until
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

79
04:28.420 --> 04:33.060
When you change the router ID on OSPF, that won't actually take effect until

80
04:33.060 --> 04:33.740
you clear

81
04:33.740 --> 04:35.460
the process.

82
04:35.460 --> 04:38.500
So we'll do a clear IPOS PF process.

83
04:38.500 --> 04:40.220
We'll say yes.

84
04:40.220 --> 04:44.100
And we'll look at the output again of the show IPOS PF.

85
04:44.100 --> 04:48.820
Now we can see that it's using the OSPF process ID that we wanted to use, the

86
04:48.820 --> 04:51.740
10.100.1.1.

87
04:51.740 --> 04:53.700
So that takes care of router 1.

88
04:53.700 --> 04:55.900
Let's jump over to router 2.

89
04:55.900 --> 04:59.300
So once again, we see our banner has been applied.

90
04:59.300 --> 05:04.480
If we do a show VRRP, we see that the priority on this router is 90 as it's
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

90
04:59.300 --> 05:04.480
If we do a show VRRP, we see that the priority on this router is 90 as it's

91
05:04.480 --> 05:06.700
supposed to be.

92
05:06.700 --> 05:11.520
And if we do our show IPOS PF, notice that just like router 1, this is still

93
05:11.520 --> 05:12.220
using the

94
05:12.220 --> 05:13.700
old router ID.

95
05:13.700 --> 05:16.340
So we simply need to do the same thing.

96
05:16.340 --> 05:18.700
We'll simply clear the process.

97
05:18.700 --> 05:22.030
So now when we look at it again, we see that we do in fact have the correct

98
05:22.030 --> 05:23.260
router ID

99
05:23.260 --> 05:25.820
for OSPF 10.

100
05:25.820 --> 05:30.460
So that concludes everything that we needed to accomplish in the challenge.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

100
05:25.820 --> 05:30.460
So that concludes everything that we needed to accomplish in the challenge.

101
05:30.460 --> 05:33.860
And therefore that concludes this skill.

102
05:33.860 --> 05:39.100
Congratulations on completing Configure the On-Prem SD-WAN Edge.

103
05:39.100 --> 05:41.580
I hope this has been informative for you.

104
05:41.580 --> 05:43.180
And I'd like to thank you for viewing.

105
05:43.180 --> 05:53.180
[BLANK_AUDIO]