WEBVTT 1 00:00.000 --> 00:10.720 Hello, and welcome to configure the on-prem SD-WAN Edge with CML 2.7. 2 00:10.720 --> 00:14.430 In this skill, what we're going to be doing is now that our environment is 3 00:14.430 --> 00:15.200 actually up 4 00:15.200 --> 00:21.280 and functional, well, we now have to configure Router1 and Router2. 5 00:21.280 --> 00:22.960 And what are we going to do with them? 6 00:22.960 --> 00:25.120 Well, that's a good question. 7 00:25.120 --> 00:28.720 The first thing we're going to have to do is come up with a game plan. 8 00:28.720 --> 00:30.720 That's the first thing we're going to discuss. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 8 00:28.720 --> 00:30.720 That's the first thing we're going to discuss. 9 00:30.720 --> 00:34.240 What are we trying to accomplish and how are we going to configure these 10 00:34.240 --> 00:35.440 devices 11 00:35.440 --> 00:37.760 in our SD-WAN environment? 12 00:37.760 --> 00:40.640 Then we're going to begin that actual configuration. 13 00:40.640 --> 00:45.520 So the first step of that is going to be to create the device template. 14 00:45.520 --> 00:49.120 Now, of course, an empty device template itself doesn't do much 15 00:49.120 --> 00:51.840 even once we attach it to the devices. 16 00:51.840 --> 00:56.000 There are some things we're going to have to configure in that device template. 17 00:56.000 --> 01:00.240 One of them is going to be configuring VPN0. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 17 00:56.000 --> 01:00.240 One of them is going to be configuring VPN0. 18 01:00.240 --> 01:03.920 Even though our devices do currently have a, 19 01:03.920 --> 01:07.280 we'll call it a temporary configuration on them, 20 01:07.280 --> 01:11.120 of course, that was needed to get them connected into SD-WAN. 21 01:11.120 --> 01:14.800 But we have to make sure that the template we're going to apply 22 01:14.800 --> 01:20.400 also allows for that configuration, again, specifically for VPN0 23 01:20.400 --> 01:24.880 so that the routers can still talk to the rest of the SD-WAN servers. 24 01:24.880 --> 01:27.920 Now, of course, we also want our out-of-band management. 25 01:27.920 --> 01:32.320 So we're also going to be configuring VPN5.12 in that environment WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 25 01:27.920 --> 01:32.320 So we're also going to be configuring VPN5.12 in that environment 26 01:32.320 --> 01:35.520 so that we still have VPN5.12 functional. 27 01:35.520 --> 01:39.440 And then we're also going to configure a service VPN, 28 01:39.440 --> 01:41.600 specifically VPN10. 29 01:41.600 --> 01:45.810 And we're going to be using that for connectivity for the devices in our 30 01:45.810 --> 01:46.960 headquarters. 31 01:46.960 --> 01:50.400 We'll, of course, talk about that in much more detail 32 01:50.400 --> 01:53.440 in our next video for the game plan. 33 01:54.000 --> 01:58.720 Now, keep in mind, this skill does build on what we did 34 01:58.720 --> 02:04.000 in preparing and building our lab with CML 2.7. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 34 01:58.720 --> 02:04.000 in preparing and building our lab with CML 2.7. 35 02:04.000 --> 02:06.160 So if you have not completed that skill, 36 02:06.160 --> 02:09.520 I would encourage you to go back and finish that one first 37 02:09.520 --> 02:11.520 because this skill does, of course, 38 02:11.520 --> 02:16.080 assume that your environment is already up running and functional. 39 02:16.080 --> 02:20.480 Now, as you can tell, we have a lot of stuff to do in this skill. 40 02:20.480 --> 02:22.720 So let's just jump in and get started. 41 02:22.720 --> 02:27.760 I'll see you in the next video as we put together our game plan.