WEBVTT

1
00:00.000 --> 00:07.190
So, in this challenge, we're asked to make three additional changes to our SD-W

2
00:07.190 --> 00:08.720
AN environment.

3
00:08.720 --> 00:15.260
The first is to set the login banner of the routers to a specific text.

4
00:15.260 --> 00:20.730
The next thing is to configure the VRRP priority, specifically on router 1 and

5
00:20.730 --> 00:21.860
router 2, to

6
00:21.860 --> 00:23.880
some given values.

7
00:23.880 --> 00:30.210
And finally, we're supposed to set the OSPF router ID specifically for VPN 10
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

7
00:23.880 --> 00:30.210
And finally, we're supposed to set the OSPF router ID specifically for VPN 10

8
00:30.210 --> 00:30.680
to be the

9
00:30.680 --> 00:33.760
router's loop back zero interface address.

10
00:33.760 --> 00:36.320
So, let's go ahead and jump in here.

11
00:36.320 --> 00:39.640
Of course, we're going to have to edit our device template here.

12
00:39.640 --> 00:41.840
So let's begin with that.

13
00:41.840 --> 00:46.600
We'll simply go into edit and let's start with the banner.

14
00:46.600 --> 00:49.840
The banner is down here under additional templates.

15
00:49.840 --> 00:55.270
So here under Cisco banner, let's just click on the dropdown and let's create a

16
00:55.270 --> 00:56.520
new template.

17
00:56.520 --> 00:58.640
We'll just name the template banner config.

18
00:58.640 --> 01:01.320
We'll give it a description of login banner.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

18
00:58.640 --> 01:01.320
We'll give it a description of login banner.

19
01:01.320 --> 01:04.400
Of course, these don't matter if you named yours something different.

20
01:04.400 --> 01:05.960
That's perfectly fine.

21
01:05.960 --> 01:09.480
The only thing that really matters is that we were supposed to configure a

22
01:09.480 --> 01:10.360
login banner.

23
01:10.360 --> 01:13.000
So let's change this to global.

24
01:13.000 --> 01:15.800
And then here we have to put in our banner.

25
01:15.800 --> 01:20.610
So here we'll just copy and paste the text that we were given and we'll hit

26
01:20.610 --> 01:21.280
save.

27
01:21.280 --> 01:24.200
So that's easy enough for the banner.

28
01:24.200 --> 01:29.240
So now we simply hit update and push this config out to our two routers.

29
01:29.240 --> 01:31.040
We've done this several times.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

29
01:29.240 --> 01:31.040
We've done this several times.

30
01:31.040 --> 01:35.560
So let's just skip ahead to editing the feature templates.

31
01:35.560 --> 01:39.980
So if we go over to our feature templates, we'll go down here at the very

32
01:39.980 --> 01:40.800
bottom is the

33
01:40.800 --> 01:42.920
gigabit 2.10 template.

34
01:42.920 --> 01:49.130
And we'll click on this, we'll hit edit, scroll here to the VRRP section, then

35
01:49.130 --> 01:49.800
we'll click

36
01:49.800 --> 01:53.720
edit and we're told to set the priority.

37
01:53.720 --> 01:57.060
So we need to change the priority, but it's going to have to be to a device

38
01:57.060 --> 01:59.160
specific value.

39
01:59.160 --> 02:04.950
So as we did before, let's add our interface to this default key name, click
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

39
01:59.160 --> 02:04.950
So as we did before, let's add our interface to this default key name, click

40
02:04.950 --> 02:05.880
back on device

41
02:05.880 --> 02:11.160
specific and we can see that now there's a key for the VRRP priority.

42
02:11.160 --> 02:13.160
Let's hit save changes.

43
02:13.160 --> 02:15.720
So now that we've made that change, go ahead and hit update.

44
02:15.720 --> 02:19.880
We'll have to come over here and put in the priority.

45
02:19.880 --> 02:25.280
If we read our instructions, router one is supposed to be a priority of 110.

46
02:25.280 --> 02:28.480
Router two is supposed to be a priority of 90.

47
02:28.480 --> 02:32.360
We'll go ahead and hit next and configure the devices.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

47
02:28.480 --> 02:32.360
We'll go ahead and hit next and configure the devices.

48
02:32.360 --> 02:36.360
Now that that's successful, let's hit back on our browser.

49
02:36.360 --> 02:38.760
We'll go back to feature templates.

50
02:38.760 --> 02:43.460
This time we have to configure OSPF for VPN 10.

51
02:43.460 --> 02:45.440
So we'll edit this one here.

52
02:45.440 --> 02:48.000
We're supposed to change the router ID.

53
02:48.000 --> 02:51.920
So again, this is going to be device specific for this one.

54
02:51.920 --> 02:54.920
I usually put the unique part at the end.

55
02:54.920 --> 02:57.400
We'll say this is for VPN 10.

56
02:57.400 --> 03:01.240
So again, OSPF router ID for this particular VPN.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

56
02:57.400 --> 03:01.240
So again, OSPF router ID for this particular VPN.

57
03:01.240 --> 03:04.360
We'll go ahead and hit update.

58
03:04.360 --> 03:06.420
Once again, we're going to have to provide the information.

59
03:06.420 --> 03:12.360
So if we scroll over, we now have a field for the OSPF router ID.

60
03:12.360 --> 03:14.400
This is supposed to use the loopbacks.

61
03:14.400 --> 03:21.080
So this would be 10.100.1.1 and 10.100.1.2.

62
03:21.080 --> 03:24.800
Let's go ahead and hit next and configure devices.

63
03:24.800 --> 03:29.180
Now that this is successful, let's jump over to our command line and make sure

64
03:29.180 --> 03:29.980
it applied

65
03:29.980 --> 03:31.380
properly.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

65
03:29.980 --> 03:31.380
properly.

66
03:31.380 --> 03:33.260
So here we are on router one.

67
03:33.260 --> 03:37.490
And of course, the first thing we can see right off the bat is that our banner

68
03:37.490 --> 03:39.320
has been changed.

69
03:39.320 --> 03:42.040
So that part definitely worked.

70
03:42.040 --> 03:47.820
If we do a show VRRP, we can see that we are now the master with a priority of

71
03:47.820 --> 03:49.060
110.

72
03:49.060 --> 03:51.440
So our priority worked.

73
03:51.440 --> 03:54.860
Now if you know anything about OSPF, you'll know that it doesn't change its

74
03:54.860 --> 03:56.160
router ID

75
03:56.160 --> 03:58.580
until the process is restarted.

76
03:58.580 --> 04:02.480
So just to save a couple seconds, let's just go ahead and clear it.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

76
03:58.580 --> 04:02.480
So just to save a couple seconds, let's just go ahead and clear it.

77
04:02.480 --> 04:07.680
We'll just do a clear IP OSPF process, give it just a second.

78
04:07.680 --> 04:13.370
We'll do a show IP OSPF and we see that now the routing process has an ID of 10

79
04:13.370 --> 04:16.280
.100.10.1.

80
04:16.280 --> 04:19.480
Let's go ahead and verify this stuff on router two as well.

81
04:19.480 --> 04:22.660
Again, we see the banner right off the bat.

82
04:22.660 --> 04:26.880
Show VRRP, we already know this is the backup, but what we're really looking

83
04:26.880 --> 04:27.580
for is that

84
04:27.580 --> 04:33.580
it got the priority of 90 like it's supposed to, we'll clear the OSPF process,
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

84
04:27.580 --> 04:33.580
it got the priority of 90 like it's supposed to, we'll clear the OSPF process,

85
04:33.580 --> 04:33.900
do a show

86
04:33.900 --> 04:39.870
IP OSPF and we see that this is now using its loop back as it's supposed to as

87
04:39.870 --> 04:40.260
well.

88
04:40.260 --> 04:43.060
So that concludes this challenge.

89
04:43.060 --> 04:46.660
If you find you were unable to do any of this, I would encourage you to rewatch

90
04:46.660 --> 04:47.900
the solution

91
04:47.900 --> 04:51.180
and go back and give it another try.

92
04:51.180 --> 04:57.580
Otherwise, congratulations on completing configure the on-prem SD-WAN edge with

93
04:57.580 --> 04:59.460
CML 2.7.

94
04:59.460 --> 05:03.580
I hope this has been informative for you and I'd like to thank you for viewing.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

94
04:59.460 --> 05:03.580
I hope this has been informative for you and I'd like to thank you for viewing.

95
05:03.580 --> 05:13.580
[BLANK_AUDIO]