WEBVTT

1
00:00.000 --> 00:06.560
So for our final step here, we're going to jump in, do a little bit more

2
00:06.560 --> 00:08.120
verification,

3
00:08.120 --> 00:13.430
and then we're going to go ahead and create a VPN between our on-prem network

4
00:13.430 --> 00:13.640
and the

5
00:13.640 --> 00:16.960
network that we deployed into Google Cloud.

6
00:16.960 --> 00:20.780
Once that's up, we'll verify that we have reachability, and then we'll be sure

7
00:20.780 --> 00:21.160
that

8
00:21.160 --> 00:24.160
Cloud on-ramp is up and functional.

9
00:24.160 --> 00:29.360
So let's go ahead and jump in with some verification first.

10
00:29.360 --> 00:34.820
So we'll start off here on the Cloud on-ramp dashboard as we've done a few
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

10
00:29.360 --> 00:34.820
So we'll start off here on the Cloud on-ramp dashboard as we've done a few

11
00:34.820 --> 00:36.440
times, but notice

12
00:36.440 --> 00:40.780
that the top part of this page is just a bit different now.

13
00:40.780 --> 00:44.500
We still have our workflows down at the bottom, of course, but instead of

14
00:44.500 --> 00:45.480
having just a nice

15
00:45.480 --> 00:49.910
picture with some explanation, we actually have information here now that we

16
00:49.910 --> 00:50.680
have a Cloud

17
00:50.680 --> 00:52.200
Gateway deployed.

18
00:52.200 --> 00:56.200
So one of the first things we can do for verification is come right over here

19
00:56.200 --> 00:57.240
and expand the network

20
00:57.240 --> 01:03.100
snapshot, and what we see is that for the Google Cloud section, we in fact have
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

20
00:57.240 --> 01:03.100
snapshot, and what we see is that for the Google Cloud section, we in fact have

21
01:03.100 --> 01:03.520
our one

22
01:03.520 --> 01:08.360
Google Cloud Gateway as well as our two WAN edges.

23
01:08.360 --> 01:12.220
Also down here a little bit further in the middle of the page, we can actually

24
01:12.220 --> 01:12.680
see our

25
01:12.680 --> 01:17.870
two devices, and if we go down here and click on the two reachable, we get a

26
01:17.870 --> 01:18.480
little bit

27
01:18.480 --> 01:21.800
more information on each of these routers.

28
01:21.800 --> 01:26.290
But what we really want to do to start looking at the routing and create our

29
01:26.290 --> 01:27.120
VPN is connect

30
01:27.120 --> 01:30.360
into the command line of one of these routers.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

30
01:27.120 --> 01:30.360
into the command line of one of these routers.

31
01:30.360 --> 01:34.680
The easiest way to do that, let's simply cancel this window.

32
01:34.680 --> 01:44.160
We'll go to our main menu, tools, SSH terminal, and we'll open GCP R1.

33
01:44.160 --> 01:47.320
The login here is admin admin.

34
01:47.320 --> 01:51.200
We do have to hit admin a third time to get into enable mode.

35
01:51.200 --> 01:55.540
And then of course, we want to zoom in on this a little bit so we can see it

36
01:55.540 --> 01:55.920
better.

37
01:55.920 --> 01:58.720
Now unfortunately, this is a web interface.

38
01:58.720 --> 02:02.480
So we do sort of have to zoom in on the whole web page to do this.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

38
01:58.720 --> 02:02.480
So we do sort of have to zoom in on the whole web page to do this.

39
02:02.480 --> 02:06.400
But nonetheless, let's do a show VRF here.

40
02:06.400 --> 02:11.680
And what we want to see is we have a VRF for the underlay network.

41
02:11.680 --> 02:19.220
We have a VRF for our management interface VPN 512, but we don't have any

42
02:19.220 --> 02:20.440
service VPNs.

43
02:20.440 --> 02:22.720
So that's what we want to create next.

44
02:22.720 --> 02:26.860
In order to do this, let's go ahead and zoom back out so we can see the whole

45
02:26.860 --> 02:27.840
interface.

46
02:27.840 --> 02:31.250
Then we'll go back to our cloud so we can click on the cloud here and go back
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

46
02:27.840 --> 02:31.250
Then we'll go back to our cloud so we can click on the cloud here and go back

47
02:31.250 --> 02:31.960
to onramp

48
02:31.960 --> 02:34.120
for multi cloud.

49
02:34.120 --> 02:40.070
And then what we want to do is down under intent management under our workflows

50
02:40.070 --> 02:40.680
, we want

51
02:40.680 --> 02:43.600
to go to cloud connectivity.

52
02:43.600 --> 02:48.150
And this is going to show us a grid of our current connectivity, which is

53
02:48.150 --> 02:49.120
really nothing.

54
02:49.120 --> 02:55.530
What we want to do is we want to connect our source VPN 10 to our destination

55
02:55.530 --> 02:57.480
server network.

56
02:57.480 --> 03:02.630
Notice by the way, it's using that tag for the network that we provided earlier
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

56
02:57.480 --> 03:02.630
Notice by the way, it's using that tag for the network that we provided earlier

57
03:02.630 --> 03:02.640
.

58
03:02.640 --> 03:05.520
So the way we do this is we simply hit edit.

59
03:05.520 --> 03:10.980
We click this box right here to indicate that we want to connect source VPN 10

60
03:10.980 --> 03:12.120
to destination

61
03:12.120 --> 03:13.920
server network.

62
03:13.920 --> 03:16.040
And then we hit save.

63
03:16.040 --> 03:19.600
This will then deploy the mapping out into the cloud.

64
03:19.600 --> 03:21.080
This will take a few moments.

65
03:21.080 --> 03:24.160
So let's jump ahead till it's complete.

66
03:24.160 --> 03:27.560
So here we see that the mapping was successful.

67
03:27.560 --> 03:30.880
We can of course, as usual, open this up.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

67
03:27.560 --> 03:30.880
We can of course, as usual, open this up.

68
03:30.880 --> 03:34.990
And we see here that the messages are telling us that everything was successful

69
03:34.990 --> 03:35.000
.

70
03:35.000 --> 03:38.240
So let's go back over to the command line.

71
03:38.240 --> 03:43.830
So we'll come back up here, go back to tools back to SSH terminal back to

72
03:43.830 --> 03:45.920
router one.

73
03:45.920 --> 03:48.280
Let's go ahead and zoom back in.

74
03:48.280 --> 03:51.440
And once again, let's do our show VRF.

75
03:51.440 --> 03:56.480
Notice that now we have a VRF for VPN 10.

76
03:56.480 --> 03:57.920
So that's good.

77
03:57.920 --> 04:05.800
If we do a show IP route for VRF 10, two really important things to note here.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

77
03:57.920 --> 04:05.800
If we do a show IP route for VRF 10, two really important things to note here.

78
04:05.800 --> 04:12.330
First, we have a BGP route for the 10 dot 20 dot 10 dot zero slash 24, which of

79
04:12.330 --> 04:12.920
course

80
04:12.920 --> 04:18.680
is the network that's representing site 20 inside of Google Cloud.

81
04:18.680 --> 04:25.580
And then we have this OMP learned route here for the 100 dot 64 dot 10 dot zero

82
04:25.580 --> 04:25.760
, which

83
04:25.760 --> 04:28.320
is our on-prem network.

84
04:28.320 --> 04:32.870
So with these routes in place, we should now have reachability from a work
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

84
04:28.320 --> 04:32.870
So with these routes in place, we should now have reachability from a work

85
04:32.870 --> 04:33.760
station that's

86
04:33.760 --> 04:36.320
on the on-prem network.

87
04:36.320 --> 04:40.840
Let's jump over to that workstation and see if that's in fact true.

88
04:40.840 --> 04:46.520
So here on the workstation, all we have to do is ping our 10 dot 20 dot 10 dot.

89
04:46.520 --> 04:50.160
Remember, we gave it an assigned address of dot 100.

90
04:50.160 --> 04:56.480
So this represents the server that's on our VPC in Google Cloud will hit enter.

91
04:56.480 --> 04:59.640
And we can see that this is working successfully.

92
04:59.640 --> 05:06.140
Therefore, cloud on-ramp has been successfully deployed in this environment.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

92
04:59.640 --> 05:06.140
Therefore, cloud on-ramp has been successfully deployed in this environment.

93
05:06.140 --> 05:10.950
So we said at the beginning of this skill that our goal was to deploy cloud on-

94
05:10.950 --> 05:11.700
ramp with

95
05:11.700 --> 05:16.660
Google Cloud and verify that we had reachability from an on-prem network to a

96
05:16.660 --> 05:17.300
network that

97
05:17.300 --> 05:19.940
we deployed into Google Cloud.

98
05:19.940 --> 05:22.520
And that's exactly what we just accomplished.

99
05:22.520 --> 05:27.800
So that covers everything that we need to accomplish in this skill except for

100
05:27.800 --> 05:29.140
the challenge.

101
05:29.140 --> 05:31.420
So give that challenge a shot.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

101
05:29.140 --> 05:31.420
So give that challenge a shot.

102
05:31.420 --> 05:35.980
Good luck and I'll see you in the solution video on the other side.

103
05:35.980 --> 05:45.980
[BLANK_AUDIO]