WEBVTT

1
00:00.000 --> 00:05.000
So as we jump into the SD-WAN part of our configuration,

2
00:05.000 --> 00:08.000
one of the first things we're gonna wanna do

3
00:08.000 --> 00:11.000
is go ahead and set up that service account

4
00:11.000 --> 00:14.000
that we created over on the Google Cloud side,

5
00:14.000 --> 00:16.000
load up that JSON key,

6
00:16.000 --> 00:20.000
and make sure that our authentication is working correctly

7
00:20.000 --> 00:24.000
between Cloud on-ramp and Google Cloud.

8
00:24.000 --> 00:26.000
That's exactly what we're gonna do in this video,

9
00:26.000 --> 00:29.000
so let's jump in and get started.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

10
00:30.000 --> 00:34.000
So starting off here on the Monitor Overview page

11
00:34.000 --> 00:36.000
in SD-WAN Manager,

12
00:36.000 --> 00:39.000
the first thing we wanna notice is that all three

13
00:39.000 --> 00:41.000
of our controllers are online,

14
00:41.000 --> 00:43.000
so we have V-bond, V-Smart,

15
00:43.000 --> 00:46.000
and V-Manage all up and available.

16
00:46.000 --> 00:49.000
And as of right now, as we get started,

17
00:49.000 --> 00:52.000
we just have the one-wann edge device,

18
00:52.000 --> 00:55.000
specifically that's on-prem router one

19
00:55.000 --> 00:58.000
that's already configured and ready to go.

20
00:58.000 --> 01:01.000
So as we get into configuring Cloud on-ramp,
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

20
00:58.000 --> 01:01.000
So as we get into configuring Cloud on-ramp,

21
01:01.000 --> 01:05.000
what we need to do is go up here to our main menu,

22
01:05.000 --> 01:08.000
we wanna go into configuration,

23
01:08.000 --> 01:12.000
and we wanna go into Cloud on-ramp for multi-cloud.

24
01:12.000 --> 01:15.000
Now the way we're going to be configuring Cloud on-ramp

25
01:15.000 --> 01:20.000
is using these workflows down here at the bottom of the page.

26
01:20.000 --> 01:24.000
The first one we're going to do is, on the far left,

27
01:24.000 --> 01:29.000
under Setup, we're going to be doing the Associate Cloud account.

28
01:29.000 --> 01:32.000
That's what we need to do to set up the authentication.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

28
01:29.000 --> 01:32.000
That's what we need to do to set up the authentication.

29
01:32.000 --> 01:35.000
The first thing we have to do here, of course,

30
01:35.000 --> 01:37.000
is choose our Cloud provider,

31
01:37.000 --> 01:40.000
which, of course, is going to be Google Cloud.

32
01:40.000 --> 01:43.000
Once we choose that, it's going to want a name.

33
01:43.000 --> 01:45.000
This is just a locally significant name,

34
01:45.000 --> 01:48.000
so we'll just call this GCPAuth.

35
01:48.000 --> 01:51.000
Once again, we can give a description if we want.

36
01:51.000 --> 01:55.000
It's optional. For Cloud Gateway, we're going to say yes,

37
01:55.000 --> 01:59.000
because we are going to be deploying a Cloud Gateway.

38
01:59.000 --> 02:02.000
It then gives an option to provide a billing ID.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

38
01:59.000 --> 02:02.000
It then gives an option to provide a billing ID.

39
02:02.000 --> 02:05.000
We don't have to do this, and again, it being a lab,

40
02:05.000 --> 02:07.000
we're not too concerned about it.

41
02:07.000 --> 02:10.000
For the service directory lookup,

42
02:10.000 --> 02:13.000
we'll leave that as the default of disabled,

43
02:13.000 --> 02:17.000
and then here is where we're going to upload our private key ID.

44
02:17.000 --> 02:21.000
If we click on this, we can choose our credentials file.

45
02:21.000 --> 02:25.000
This is the JSON file that we downloaded earlier from Google.

46
02:25.000 --> 02:30.000
Let's go ahead and click on this, hit Open, hit Upload,
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

47
02:30.000 --> 02:34.000
and now our file has been successfully uploaded.

48
02:34.000 --> 02:36.000
Now let's go ahead and hit Add,

49
02:36.000 --> 02:39.000
and make sure that everything's working correctly.

50
02:39.000 --> 02:42.000
As long as everything's working with the authentication,

51
02:42.000 --> 02:45.000
we're going to get this success message here,

52
02:45.000 --> 02:48.000
which also has a link to the next step.

53
02:48.000 --> 02:50.000
We'll talk about that more in a moment,

54
02:50.000 --> 02:53.000
but notice here down at the bottom,

55
02:53.000 --> 02:56.000
it's also seeing our Cloud account ID.

56
02:56.000 --> 03:00.000
It sees our Cloud account name, which of course we just configured.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

57
03:00.000 --> 03:03.000
If we had put in a description, it would be here.

58
03:03.000 --> 03:06.000
We also see the Cloud type, the credential type,

59
03:06.000 --> 03:08.000
that Cloud Gateway is enabled,

60
03:08.000 --> 03:13.000
and it has already gone out to see that there are 40 regions available.

61
03:13.000 --> 03:17.000
So these are all indicators that the authentication portion of our setup

62
03:17.000 --> 03:20.000
is functioning properly.

63
03:20.000 --> 03:23.000
So now that the authentication is working properly,

64
03:23.000 --> 03:27.000
our next step is to do exactly what this workflow says,

65
03:27.000 --> 03:31.000
which is to go configure the Cloud global options.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

65
03:27.000 --> 03:31.000
which is to go configure the Cloud global options.

66
03:31.000 --> 03:33.000
We'll do that in the next video.

67
03:33.000 --> 03:41.000
[BLANK_AUDIO]