WEBVTT

1
00:00.000 --> 00:06.580
So now that the authentication is working, we can begin to configure Cloud on

2
00:06.580 --> 00:07.880
ramp itself.

3
00:07.880 --> 00:12.340
Now, this configuration is sort of separated into two parts.

4
00:12.340 --> 00:16.500
First, we have the global settings, which is what we're going to be configuring

5
00:16.500 --> 00:17.220
here.

6
00:17.220 --> 00:20.900
And then when we actually deploy the cloud gateway, there'll be a few more

7
00:20.900 --> 00:21.460
settings we

8
00:21.460 --> 00:23.540
have to do there as well.

9
00:23.540 --> 00:27.680
And it'll actually pull some of its settings from these global settings, which

10
00:27.680 --> 00:28.180
we could

11
00:28.180 --> 00:31.540
then modify at that point, if we wanted to as well.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

11
00:28.180 --> 00:31.540
then modify at that point, if we wanted to as well.

12
00:31.540 --> 00:34.570
But for right now, let's just get started with the first part of the

13
00:34.570 --> 00:35.500
configuration,

14
00:35.500 --> 00:39.500
the cloud global settings.

15
00:39.500 --> 00:43.820
So we're just going to follow along with the workflow here.

16
00:43.820 --> 00:48.330
This is the success page that we end up on after we did the authentication

17
00:48.330 --> 00:49.180
account.

18
00:49.180 --> 00:53.850
Well, there's a link right here to actually proceed to the next step, which is

19
00:53.850 --> 00:54.540
the cloud

20
00:54.540 --> 00:56.180
global settings.

21
00:56.180 --> 00:58.860
And we could very easily use that link.

22
00:58.860 --> 01:03.130
However, if you have navigated somewhere else in the meantime, maybe working on
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

22
00:58.860 --> 01:03.130
However, if you have navigated somewhere else in the meantime, maybe working on

23
01:03.130 --> 01:03.780
something

24
01:03.780 --> 01:07.940
else, there are other ways to get back to these settings.

25
01:07.940 --> 01:11.540
First, we could go to our main menu.

26
01:11.540 --> 01:16.900
We could go back to configuration, back to cloud on ramp for multi cloud.

27
01:16.900 --> 01:20.980
And then here at the bottom, under workflows and setup, we could go to our

28
01:20.980 --> 01:21.820
cloud global

29
01:21.820 --> 01:23.180
settings.

30
01:23.180 --> 01:27.490
You can also get there by going through the cloud up here in the top right

31
01:27.490 --> 01:28.220
corner.

32
01:28.220 --> 01:31.740
And again, choosing cloud on ramp for multi cloud.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

32
01:28.220 --> 01:31.740
And again, choosing cloud on ramp for multi cloud.

33
01:31.740 --> 01:35.500
This will bring you right back here to this exact same page.

34
01:35.500 --> 01:40.220
So there are several ways to get here and then resume where we were in the

35
01:40.220 --> 01:41.180
workflow.

36
01:41.180 --> 01:45.260
So for now, let's just go ahead and click on cloud global settings.

37
01:45.260 --> 01:48.620
And the first thing here, of course, is to choose the cloud provider.

38
01:48.620 --> 01:53.460
Now, since we've only configured Google Cloud so far, it's guessing that that's

39
01:53.460 --> 01:53.860
the one

40
01:53.860 --> 01:56.980
we want to configure and it's correct.

41
01:56.980 --> 02:02.360
But what can be a little bit misleading on this page is this is not an editable
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

41
01:56.980 --> 02:02.360
But what can be a little bit misleading on this page is this is not an editable

42
02:02.360 --> 02:03.060
page.

43
02:03.060 --> 02:07.620
We can't just click on these options here and start configuring things.

44
02:07.620 --> 02:14.700
What we need to do is add cloud global settings for Google Cloud.

45
02:14.700 --> 02:18.270
So in order to do that, we need to go all the way over here to the right, click

46
02:18.270 --> 02:19.740
on add.

47
02:19.740 --> 02:23.460
And now we can edit the settings on this page.

48
02:23.460 --> 02:27.220
So the first thing we want to do is select our software image.

49
02:27.220 --> 02:30.980
These are going to be all of the images that are available in the cloud.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

49
02:27.220 --> 02:30.980
These are going to be all of the images that are available in the cloud.

50
02:30.980 --> 02:36.700
So I'm going to choose marketplace 1771A just because I've tested this and

51
02:36.700 --> 02:37.540
verified that

52
02:37.540 --> 02:40.780
it works with this version of code properly.

53
02:40.780 --> 02:43.420
Then we can choose the instant size.

54
02:43.420 --> 02:48.290
If we click on the dropdown, notice here that there are two choices and which

55
02:48.290 --> 02:49.300
one you choose

56
02:49.300 --> 02:52.380
is going to be based on the required throughput.

57
02:52.380 --> 02:57.190
In this case, it being a lab, we, of course, can get away with the smaller

58
02:57.190 --> 02:58.060
version.

59
02:58.060 --> 03:02.220
So we'll choose the N1 standard for next.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

59
02:58.060 --> 03:02.220
So we'll choose the N1 standard for next.

60
03:02.220 --> 03:05.020
We're going to put in a subnet pool.

61
03:05.020 --> 03:08.880
Now keep in mind, this is not the subnet that we're going to be trying to get

62
03:08.880 --> 03:09.420
to from

63
03:09.420 --> 03:11.380
our on-prem network.

64
03:11.380 --> 03:13.180
We've already configured that.

65
03:13.180 --> 03:17.460
That's our VPC and our subnet that we put our VM in.

66
03:17.460 --> 03:21.690
This is a subnet pool that's going to use for things like the underlay

67
03:21.690 --> 03:23.100
management networks

68
03:23.100 --> 03:24.540
and so on.

69
03:24.540 --> 03:29.590
So we'll just say that we're going to use 10 dot 200 dot zero dot zero slash 16

70
03:29.590 --> 03:29.700
and

71
03:29.700 --> 03:33.060
it will create the subnets as needed.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

71
03:29.700 --> 03:33.060
it will create the subnets as needed.

72
03:33.060 --> 03:37.490
The next thing we have to configure is the BGP AS number that we're going to be

73
03:37.490 --> 03:37.940
using

74
03:37.940 --> 03:41.660
when communicating with the Google Cloud Hub.

75
03:41.660 --> 03:45.710
Now there are some rather strict requirements here on the range that these

76
03:45.710 --> 03:46.500
numbers can be

77
03:46.500 --> 03:47.500
in.

78
03:47.500 --> 03:53.970
We can see in the dialog box itself where it says the range can be 64, 520 to

79
03:53.970 --> 03:55.660
65, 520.

80
03:55.660 --> 04:00.430
It has to be multiples of 10 and then they have some red jacks there where it
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

80
03:55.660 --> 04:00.430
It has to be multiples of 10 and then they have some red jacks there where it

81
04:00.430 --> 04:00.900
has to

82
04:00.900 --> 04:03.460
meet a specific criteria.

83
04:03.460 --> 04:07.080
If you don't have a particular reason to use a certain number, you could simply

84
04:07.080 --> 04:07.660
use something

85
04:07.660 --> 04:09.900
like 65,000 here.

86
04:09.900 --> 04:12.100
That will be perfectly acceptable.

87
04:12.100 --> 04:14.900
Now most of these other settings, we're going to leave it there.

88
04:14.900 --> 04:19.060
Default, but there are a few exceptions for the site to site communication.

89
04:19.060 --> 04:21.020
We'll go ahead and disable that.

90
04:21.020 --> 04:24.300
That way we're not doing site to site tunnels.

91
04:24.300 --> 04:28.300
The service directory look up will leave that disabled.

92
04:28.300 --> 04:30.780
We can choose the network service tier.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

92
04:28.300 --> 04:30.780
We can choose the network service tier.

93
04:30.780 --> 04:34.780
If we click on the drop down here, we can just choose standard and then the

94
04:34.780 --> 04:35.380
periodic

95
04:35.380 --> 04:37.260
audit and the auto correct.

96
04:37.260 --> 04:40.700
We'll leave both of those features enabled.

97
04:40.700 --> 04:44.580
So with all of these settings in place, let's go ahead and hit save.

98
04:44.580 --> 04:49.470
So now we get a success message that everything worked properly and we again

99
04:49.470 --> 04:50.580
get those links

100
04:50.580 --> 04:55.670
to move on to the next steps, which are discover the host private networks and

101
04:55.670 --> 04:56.940
then ultimately

102
04:56.940 --> 05:00.220
configuring the cloud gateway.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

102
04:56.940 --> 05:00.220
configuring the cloud gateway.

103
05:00.220 --> 05:05.080
So as our workflow is indicating here, this has been completed successfully and

104
05:05.080 --> 05:05.620
the next

105
05:05.620 --> 05:10.780
step is going to be to configure the host private networks, give them tags and

106
05:10.780 --> 05:11.060
that's

107
05:11.060 --> 05:12.700
exactly what we're going to do next.

108
05:12.700 --> 05:19.100
Thank you very much.