WEBVTT

1
00:00.000 --> 00:06.980
So for this challenge, we're told to deploy a redundant router into Google

2
00:06.980 --> 00:07.000
Cloud.

3
00:07.000 --> 00:11.330
Now the cool thing is the second router is always going to be a little bit

4
00:11.330 --> 00:16.000
easier because of course we already have all the cloud infrastructure built.

5
00:16.000 --> 00:22.580
We have our VPCs and our subnets and we already have the template created in SD

6
00:22.580 --> 00:23.000
WAN.

7
00:23.000 --> 00:28.170
So we can start off right here in the marketplace by deploying our second

8
00:28.170 --> 00:29.000
router.

9
00:29.000 --> 00:34.000
So here in the marketplace, we'll start by searching for the C8000V.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

9
00:29.000 --> 00:34.000
So here in the marketplace, we'll start by searching for the C8000V.

10
00:34.000 --> 00:37.000
We'll click on the only available model to bring your own license.

11
00:37.000 --> 00:39.000
We'll choose launch.

12
00:39.000 --> 00:44.000
We'll start by giving it a deployment name, GCP R2.

13
00:44.000 --> 00:47.000
We'll name the instance the same thing.

14
00:47.000 --> 00:52.260
For the username and instance key, we're going to use the same ones that we

15
00:52.260 --> 00:54.000
used for router one.

16
00:54.000 --> 00:58.260
You could of course create another key here if you want to, but there's really

17
00:58.260 --> 00:59.000
no need.

18
00:59.000 --> 01:04.000
So our username is going to be admin and we paste in our SSH key.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

18
00:59.000 --> 01:04.000
So our username is going to be admin and we paste in our SSH key.

19
01:04.000 --> 01:08.000
For the zone, once again, this needs to be where your VPCs are.

20
01:08.000 --> 01:12.000
So mine are in East one US.

21
01:12.000 --> 01:15.000
For the machine type, we're going to leave the default here.

22
01:15.000 --> 01:20.000
We're going to go ahead and use the N1 standard for the image version.

23
01:20.000 --> 01:25.000
Of course, we want to change this in my environment to 1713.

24
01:25.000 --> 01:28.000
We'll scroll down here to our networking.

25
01:28.000 --> 01:32.990
For our first network interface, we're going to set this to be the outside
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

25
01:28.000 --> 01:32.990
For our first network interface, we're going to set this to be the outside

26
01:32.990 --> 01:34.000
interface.

27
01:34.000 --> 01:39.000
So this would actually be SD WAN edge and go into subnet one.

28
01:39.000 --> 01:41.000
Then we need to come down here to the bottom.

29
01:41.000 --> 01:44.000
Remember, very important part here.

30
01:44.000 --> 01:48.000
We need to click on the show additional network interfaces options.

31
01:48.000 --> 01:52.000
Click on the number of additional interfaces and set this to one.

32
01:52.000 --> 01:57.000
Or of course, to the appropriate number for how many you intend on adding.

33
01:57.000 --> 02:01.450
Then we scroll down a little bit more and we get rid of all of these extra
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

33
01:57.000 --> 02:01.450
Then we scroll down a little bit more and we get rid of all of these extra

34
02:01.450 --> 02:03.000
network interfaces

35
02:03.000 --> 02:05.000
that we're not actually going to be using.

36
02:05.000 --> 02:08.670
For the one we are going to be using, we'll click on the drop down, make sure

37
02:08.670 --> 02:10.000
this is correct.

38
02:10.000 --> 02:11.000
We can see that it is.

39
02:11.000 --> 02:15.000
We do want this on the client network and on subnet 10.

40
02:15.000 --> 02:20.000
Remember, there's no way here to actually specify an IP address.

41
02:20.000 --> 02:24.140
So we're just going to have to use whatever Google Cloud gives us here for

42
02:24.140 --> 02:25.000
these interfaces.

43
02:25.000 --> 02:29.620
Once all of this is configured, we can come all the way to the bottom here and

44
02:29.620 --> 02:31.000
say deploy.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

44
02:29.620 --> 02:31.000
say deploy.

45
02:31.000 --> 02:36.000
So we see here that our GCP R2 has been successfully deployed.

46
02:36.000 --> 02:39.000
We now have our external IP address.

47
02:39.000 --> 02:41.000
And of course, we know what the SSH key is.

48
02:41.000 --> 02:47.000
So now we should be able to go ahead and SSH into GCP R2.

49
02:47.000 --> 02:52.220
So now that we get connected into our router, the first thing we want to do is

50
02:52.220 --> 02:54.000
install our certificate.

51
02:54.000 --> 02:58.000
We'll use TCL script or tickle script to do this.

52
02:58.000 --> 03:01.000
So we'll go ahead and paste this in.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

52
02:58.000 --> 03:01.000
So we'll go ahead and paste this in.

53
03:01.000 --> 03:04.090
Keep in mind as we go through here, a lot of this stuff is going to be

54
03:04.090 --> 03:06.000
difficult to see on the screen.

55
03:06.000 --> 03:11.000
So I have all of the script outlined in the code window below this video.

56
03:11.000 --> 03:15.000
The next thing we want to do is switch this to controller mode.

57
03:15.000 --> 03:20.110
So we'll do controller mode enable, take the two defaults and let the router

58
03:20.110 --> 03:21.000
reload.

59
03:21.000 --> 03:26.660
So now we're connected back into router two after our reload. So we want to go

60
03:26.660 --> 03:28.000
into config transaction.

61
03:28.000 --> 03:32.730
Once we're in config transaction, we go ahead and paste the rest of our
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

61
03:28.000 --> 03:32.730
Once we're in config transaction, we go ahead and paste the rest of our

62
03:32.730 --> 03:34.000
configuration in.

63
03:34.000 --> 03:40.000
And once we get this in, we just have to add this into SD WAN manager.

64
03:40.000 --> 03:43.000
So let's paste our command in with our chassis number and our token.

65
03:43.000 --> 03:45.000
We'll go ahead and hit enter.

66
03:45.000 --> 03:49.000
And now we jump over to SD WAN manager.

67
03:49.000 --> 03:56.000
So here in SD WAN manager, we see the GCP R2 is now online in site 40.

68
03:56.000 --> 04:00.000
We have our green checkmark and it is currently reachable.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

69
04:00.000 --> 04:05.560
As per normal, we don't have any CPU load or memory utilization yet, but that's

70
04:05.560 --> 04:06.000
okay.

71
04:06.000 --> 04:09.000
What we need to do is push out our template.

72
04:09.000 --> 04:12.000
So let's go over here to configuration.

73
04:12.000 --> 04:14.000
We'll go to templates.

74
04:14.000 --> 04:17.000
We'll go down here to our GCP edge router.

75
04:17.000 --> 04:27.000
Click on our menu, attach devices, choose GCP R2, add it to our list, attach it

76
04:27.000 --> 04:32.000
, fill in the necessary fields here of the host name, system IP and site ID.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

76
04:27.000 --> 04:32.000
, fill in the necessary fields here of the host name, system IP and site ID.

77
04:32.000 --> 04:36.000
We get our green checkmark and we hit next.

78
04:36.000 --> 04:41.000
We'll configure our devices and it'll push this out to GCP R2.

79
04:41.000 --> 04:46.000
So here we see that GCP R2 has successfully pulled the template.

80
04:46.000 --> 04:51.590
So now let's assume that it worked and jump right over to on-prem R1 and see if

81
04:51.590 --> 04:55.000
it has the redundant routes that we're looking for.

82
04:55.000 --> 04:58.000
So let's do our show IP route for VRF 10.

83
04:58.000 --> 05:05.270
What we're looking for here specifically, of course, is the 10.40.10.0/24
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

83
04:58.000 --> 05:05.270
What we're looking for here specifically, of course, is the 10.40.10.0/24

84
05:05.270 --> 05:08.000
network to have two paths.

85
05:08.000 --> 05:14.190
And we see that it does in fact have two paths, one through GCP R1 and the

86
05:14.190 --> 05:16.000
other one through GCP R2.

87
05:16.000 --> 05:21.000
So our redundant routing is working exactly as we intended.

88
05:21.000 --> 05:26.000
So that concludes this challenge and therefore this skill.

89
05:26.000 --> 05:30.170
If you feel you were missing any of the information needed to complete this
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

89
05:26.000 --> 05:30.170
If you feel you were missing any of the information needed to complete this

90
05:30.170 --> 05:34.740
challenge, I would encourage you to go back and review those sections in the

91
05:34.740 --> 05:36.000
skill above.

92
05:36.000 --> 05:42.000
Otherwise, congratulations on completing manual SDWAN deployment to GCP.

93
05:42.000 --> 05:47.000
I hope this has been informative for you and I'd like to thank you for viewing.

94
05:47.000 --> 05:56.540
[BLANK_AUDIO]