1
00:00:00,000 --> 00:00:03,325
[AUDIO LOGO]

2
00:00:03,325 --> 00:00:08,080

3
00:00:08,080 --> 00:00:12,070
Hello, and welcome to
Implementing MPLS traffic

4
00:00:12,070 --> 00:00:14,500
engineering, or TE.

5
00:00:14,500 --> 00:00:18,010
In this skill, we'll actually
be jumping onto the command line

6
00:00:18,010 --> 00:00:20,890
and configuring MPLS
traffic engineering

7
00:00:20,890 --> 00:00:22,910
in the core of our network.

8
00:00:22,910 --> 00:00:25,690
Now, in order to do this,
there are several things

9
00:00:25,690 --> 00:00:27,580
we're going to
have to configure.

10
00:00:27,580 --> 00:00:30,850
The first, we're going to
have to enable the traffic

11
00:00:30,850 --> 00:00:34,900
engineering feature itself
on the interfaces and devices

12
00:00:34,900 --> 00:00:36,310
in the core.

13
00:00:36,310 --> 00:00:39,220
Then we're going
to configure RSVP,

14
00:00:39,220 --> 00:00:43,780
which is our control protocol
for signaling the tunnel.

15
00:00:43,780 --> 00:00:47,470
Then we're going to be
configuring our core protocol

16
00:00:47,470 --> 00:00:52,090
in the case of this skill
that will be OSPF to actually

17
00:00:52,090 --> 00:00:54,770
support traffic engineering.

18
00:00:54,770 --> 00:00:57,340
Once all of that is
configured, then we'll

19
00:00:57,340 --> 00:00:59,920
be ready to actually configure
our traffic engineering

20
00:00:59,920 --> 00:01:00,910
tunnels.

21
00:01:00,910 --> 00:01:03,130
And once those are
up, we'll finally

22
00:01:03,130 --> 00:01:07,840
be ready to actually send
some traffic down our MPLS TE

23
00:01:07,840 --> 00:01:08,930
tunnels.

24
00:01:08,930 --> 00:01:12,250
So as you can hear, there's
a lot of things to cover,

25
00:01:12,250 --> 00:01:14,840
so let's go ahead and
jump in and get started.

26
00:01:14,840 --> 00:01:18,210
I'll see you in the next video.

27
00:01:18,210 --> 00:01:21,000