WEBVTT

1
00:00.000 --> 00:02.400
So in our journey, we are right here.

2
00:02.400 --> 00:05.480
We're going to deploy this tier one gateway

3
00:05.480 --> 00:09.300
and associate it with our blue VRF tier zero gateway.

4
00:09.300 --> 00:11.560
And by that association, that'll cause any routes

5
00:11.560 --> 00:14.080
or connected segments on our tier one gateway here

6
00:14.080 --> 00:16.240
to be associated with that blue VRF.

7
00:16.240 --> 00:18.080
And again, the benefit of having them all separated

8
00:18.080 --> 00:19.800
and part of that VRF is that they are separate

9
00:19.800 --> 00:22.400
from other tenants or other customers.

10
00:22.400 --> 00:24.000
So here in the NSX manager,

11
00:24.000 --> 00:26.920
let's once again click on the networking tab up on top

12
00:26.920 --> 00:29.240
and let's take a peek at our network topology.

13
00:29.240 --> 00:31.920
And sure enough, here we have our tier zero gateway
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

13
00:29.240 --> 00:31.920
And sure enough, here we have our tier zero gateway

14
00:31.920 --> 00:34.320
and we also have our blue VRF tier zero gateway

15
00:34.320 --> 00:38.080
and we're about to add the tier one gateway below it

16
00:38.080 --> 00:40.120
and associate it with this blue VRF.

17
00:40.120 --> 00:42.420
So to do that with networking still selected at the top

18
00:42.420 --> 00:45.240
on the left, we're going to click on tier one gateways

19
00:45.240 --> 00:48.240
right here and click on add tier one gateway.

20
00:48.240 --> 00:51.120
So for the name, let's call it blue T1 gateway A

21
00:51.120 --> 00:53.560
and then as far as who it's associated with

22
00:53.560 --> 00:55.200
over here in the linked tier zero gateway,

23
00:55.200 --> 00:56.080
we'll use the drop down.

24
00:56.080 --> 00:58.640
We're going to associate that with this blue VRF

25
00:58.640 --> 01:01.720
and that's what links this tier one gateway to that VRF.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

25
00:58.640 --> 01:01.720
and that's what links this tier one gateway to that VRF.

26
01:01.720 --> 01:03.520
And then for the edge cluster, we'll use the drop down.

27
01:03.520 --> 01:04.520
We'll choose our edge cluster,

28
01:04.520 --> 01:06.480
which has edge one and edge two in it.

29
01:06.480 --> 01:08.840
And then we'd also want to set up DHCP services.

30
01:08.840 --> 01:10.280
However, before we can do that,

31
01:10.280 --> 01:12.160
we need to go ahead and do a quick save.

32
01:12.160 --> 01:13.400
So we'll click save.

33
01:13.400 --> 01:15.320
So now the tier one gateway exists

34
01:15.320 --> 01:17.960
and I'm going to click on yes to continue editing it.

35
01:17.960 --> 01:20.040
And we had a previous skill on DHCP services.

36
01:20.040 --> 01:21.360
So I'm going to repeat those steps here

37
01:21.360 --> 01:23.800
by clicking on set for the gateway itself

38
01:23.800 --> 01:26.040
from the drop down saying DHCP services

39
01:26.040 --> 01:28.280
and then point to our DHCP profile,

40
01:28.280 --> 01:30.440
which is using this logical IP address
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

40
01:28.280 --> 01:30.440
which is using this logical IP address

41
01:30.440 --> 01:33.840
as a DHCP server inside of NSX and we'll click on apply.

42
01:33.840 --> 01:35.760
Also on this tier one gateway,

43
01:35.760 --> 01:38.640
if we want to advertise any directly connected network

44
01:38.640 --> 01:41.480
segments that we're about to add to our tier zero gateway,

45
01:41.480 --> 01:43.080
which is our blue VRF,

46
01:43.080 --> 01:45.280
we'd also want to tell it to do that right here

47
01:45.280 --> 01:48.600
under route advertisement and clicking on this slider right here

48
01:48.600 --> 01:51.280
to say please advertise all connected segments

49
01:51.280 --> 01:54.840
and service ports effectively up to the tier zero gateway.

50
01:54.840 --> 01:57.520
And our tier zero gateway is the blue VRF.

51
01:57.520 --> 01:59.640
So with that set and the DHCP set,

52
01:59.640 --> 02:02.000
let's go ahead and scroll down and click on save.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

52
01:59.640 --> 02:02.000
let's go ahead and scroll down and click on save.

53
02:02.000 --> 02:04.120
And then we'll click on close editing

54
02:04.120 --> 02:06.920
and let's click on network topology and take a look.

55
02:06.920 --> 02:09.960
So here we have our blue VRF, there's our tier zero gateway

56
02:09.960 --> 02:12.360
and then below it we have the tier one gateway

57
02:12.360 --> 02:14.240
that we just created a moment ago.

58
02:14.240 --> 02:16.440
And as far as services go if we hover over that

59
02:16.440 --> 02:19.120
is showing us that we have in addition to gateway firewall rules,

60
02:19.120 --> 02:21.280
we also have DHCP services,

61
02:21.280 --> 02:23.400
which we enabled as part of that gateway.

62
02:23.400 --> 02:25.360
We could also confirm this from the CLI.

63
02:25.360 --> 02:28.120
So let's head over to edge one and take a look

64
02:28.120 --> 02:30.600
at this new tier one gateway A.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

64
02:28.120 --> 02:30.600
at this new tier one gateway A.

65
02:30.600 --> 02:33.160
So back here at edge one, let's do a gate gateways

66
02:33.160 --> 02:34.320
and press enter.

67
02:34.320 --> 02:36.960
So here we have the entry for gateway A.

68
02:36.960 --> 02:40.480
And so if we go into VRF 13 by typing in VRF 13,

69
02:40.480 --> 02:43.560
which is the VRF associated with that logical gateway,

70
02:43.560 --> 02:45.920
let's do a get forwarding press enter

71
02:45.920 --> 02:47.320
and there is the routing table.

72
02:47.320 --> 02:51.800
So we have a default route that's going up to the blue VRF,

73
02:51.800 --> 02:54.680
that's the inter router IP address game that it's using.

74
02:54.680 --> 02:56.120
So this all looks great.

75
02:56.120 --> 02:58.720
So now that we have this tier one gateway

76
02:58.720 --> 03:00.480
in the VRF of blue all set up,
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

76
02:58.720 --> 03:00.480
in the VRF of blue all set up,

77
03:00.480 --> 03:01.840
the next step would be to go ahead

78
03:01.840 --> 03:04.320
and create this segment right here, segment 10,

79
03:04.320 --> 03:06.880
and we'll use the IP dressing space of 1010-0

80
03:06.880 --> 03:09.040
associated with this tier one gateway A

81
03:09.040 --> 03:10.520
that's in the blue VRF.

82
03:10.520 --> 03:12.480
And then put some VMs on that segment

83
03:12.480 --> 03:15.720
and then test connectivity to verify everything is working.

84
03:15.720 --> 03:17.800
So join me in the next video as we take this next step

85
03:17.800 --> 03:19.740
to create this segment right here.