WEBVTT

1
00:00.000 --> 00:04.000
So now that the global manager knows about site one and site two,

2
00:04.000 --> 00:06.600
and we've also given it a few minutes to initialize,

3
00:06.600 --> 00:10.700
our next logical step is to import the configurations from site one and site

4
00:10.700 --> 00:11.000
two

5
00:11.000 --> 00:12.600
into the global manager.

6
00:12.600 --> 00:15.400
So let's head over to the global manager and we'll do that now.

7
00:15.400 --> 00:18.800
So here at the global manager prior to importing the configs,

8
00:18.800 --> 00:22.960
if we click here on networking, currently this global manager knows about no

9
00:22.960 --> 00:23.800
tier zero gateways,

10
00:23.800 --> 00:26.400
no tier one gateways, no segments, nothing.

11
00:26.400 --> 00:28.000
However, once we import the configs,

12
00:28.000 --> 00:31.660
it'll know about what other configs are regarding tier zero and tier one gate
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

12
00:28.000 --> 00:31.660
it'll know about what other configs are regarding tier zero and tier one gate

13
00:31.660 --> 00:31.800
ways

14
00:31.800 --> 00:34.200
and segments at site one and site two.

15
00:34.200 --> 00:37.000
So again, if we click here on tier one gateways for a moment,

16
00:37.000 --> 00:39.000
notice there's nothing there at the moment.

17
00:39.000 --> 00:42.800
So let's click on system and with the system tab selected on the left,

18
00:42.800 --> 00:46.000
we're going to click on location manager and with location manager selected.

19
00:46.000 --> 00:49.000
Now if we scroll down here, showing us that for site one,

20
00:49.000 --> 00:52.610
we can go ahead and import the config and it looks like we still need to give

21
00:52.610 --> 00:54.000
it a moment or two here for site two.

22
00:54.000 --> 00:57.400
So let's here for site one, let's click right here on import.

23
00:57.400 --> 01:00.000
It's also saying that a backup is mandatory.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

24
01:00.000 --> 01:03.660
So here it's showing us the last backup, which is what we did a couple of

25
01:03.660 --> 01:06.400
videos ago in preparation for deploying our global manager.

26
01:06.400 --> 01:07.400
So that's already done.

27
01:07.400 --> 01:10.400
If we wanted to get another backup, we click there and that would automatically

28
01:10.400 --> 01:12.400
do another backup of the local manager.

29
01:12.400 --> 01:13.400
The one we have will do.

30
01:13.400 --> 01:15.400
So I'll go ahead and click here on proceed to import.

31
01:15.400 --> 01:21.400
So what it's about to import are 18 objects regarding network, one DHCP,

32
01:21.400 --> 01:24.400
two tier one gateways, one tier zero gateway.

33
01:24.400 --> 01:27.790
And what I'm going to do down here is to keep them sorted inside of the global

34
01:27.790 --> 01:28.400
manager.

35
01:28.400 --> 01:31.850
I'm going to prefix of site dash one dash and that way any of the objects that
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

35
01:28.400 --> 01:31.850
I'm going to prefix of site dash one dash and that way any of the objects that

36
01:31.850 --> 01:36.990
come in, they'll have a site dash one dash in front of it with an example shown

37
01:36.990 --> 01:37.400
right here.

38
01:37.400 --> 01:40.400
And that way it'll be very clear to see where those objects came from.

39
01:40.400 --> 01:43.830
So I'm going to go ahead and add that site dash one dash prefix and click on

40
01:43.830 --> 01:44.400
next.

41
01:44.400 --> 01:48.340
It's now giving us the confirmation of what's going to be imported and we'll

42
01:48.340 --> 01:49.400
click on import.

43
01:49.400 --> 01:53.670
All right, so that's in the process right here of doing the import little

44
01:53.670 --> 01:55.400
progress bar right there.

45
01:55.400 --> 01:59.400
So here it's showing us that it's importing the services is 20% complete.

46
01:59.400 --> 02:01.400
There's also a little graphical representation.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

46
01:59.400 --> 02:01.400
There's also a little graphical representation.

47
02:01.400 --> 02:02.400
It's 80% complete.

48
02:02.400 --> 02:03.400
Fantastic.

49
02:03.400 --> 02:05.400
And it's been a few minutes since we brought in site to.

50
02:05.400 --> 02:08.400
So let me go ahead and let me bounce off this page.

51
02:08.400 --> 02:13.250
Let me go to, for example, system overview and then go back down to location

52
02:13.250 --> 02:15.400
manager and then scroll down.

53
02:15.400 --> 02:18.400
And now that looks a lot better here for site to check it out.

54
02:18.400 --> 02:20.400
Because we found objects and policies in this location.

55
02:20.400 --> 02:21.400
Do you want to import them?

56
02:21.400 --> 02:25.790
So once again, we can click right here on import or we go to actions and from

57
02:25.790 --> 02:28.400
the drop down, we can click on import.

58
02:28.400 --> 02:29.400
Either way is great.

59
02:29.400 --> 02:31.400
So let's go ahead and click on import for site two.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

59
02:29.400 --> 02:31.400
So let's go ahead and click on import for site two.

60
02:31.400 --> 02:33.400
It's checking to see if we have a backup in place.

61
02:33.400 --> 02:34.400
We do.

62
02:34.400 --> 02:36.400
It's the one we did earlier together.

63
02:36.400 --> 02:38.400
So I'll click right here on proceed to import.

64
02:38.400 --> 02:41.840
I'm also going to add a prefix here for all these from site to so I'll type in

65
02:41.840 --> 02:46.690
site dash two dash and that way it'll put that in front of all the objects here

66
02:46.690 --> 02:47.400
and click on next.

67
02:47.400 --> 02:51.400
So here's a summary of what's about to happen, including 44 objects in site two

68
02:51.400 --> 02:55.190
are being prepared to import and we'll click on import and we'll give that a

69
02:55.190 --> 02:56.400
minute or two to complete.

70
02:56.400 --> 03:01.400
All right. So that is importing and it's at 40% and it's done.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

70
02:56.400 --> 03:01.400
All right. So that is importing and it's at 40% and it's done.

71
03:01.400 --> 03:02.400
Fantastic.

72
03:02.400 --> 03:05.400
So you successfully imported site to into global manager.

73
03:05.400 --> 03:09.820
So now if we were to hear in the global manager, go to the networking tab and

74
03:09.820 --> 03:11.400
look at the network overview.

75
03:11.400 --> 03:15.420
So now showing that the global manager is aware of two tier zero gateways for

76
03:15.420 --> 03:17.400
tier one gateways and six segments.

77
03:17.400 --> 03:21.400
And those are all the gateways and segments associated with those two sites.

78
03:21.400 --> 03:25.080
And if you want to see the details of those, we could go to, for example, tier

79
03:25.080 --> 03:28.400
one gateways and that would show us those for tier one gateways.

80
03:28.400 --> 03:32.030
If we go to tier zero gateways, here's the two tier zero gateways, one that's
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

80
03:28.400 --> 03:32.030
If we go to tier zero gateways, here's the two tier zero gateways, one that's

81
03:32.030 --> 03:34.400
at site one and other ones at site two.

82
03:34.400 --> 03:38.520
And if we needed to import some more sites, we could go ahead and go to system

83
03:38.520 --> 03:42.440
on the left. Once again, click on location manager and then scroll down and

84
03:42.440 --> 03:44.400
simply click on add on Prem location.

85
03:44.400 --> 03:48.160
Daddy, a third or fourth or fifth site, just by repeating that process for the

86
03:48.160 --> 03:50.400
additional sites that we want to onboard.

87
03:50.400 --> 03:55.250
So now that our global manager has imported the config from site one and also

88
03:55.250 --> 03:56.400
from site two.

89
03:56.400 --> 04:00.610
Before we create any stretch to shared gateways or segments, we also need to
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

89
03:56.400 --> 04:00.610
Before we create any stretch to shared gateways or segments, we also need to

90
04:00.610 --> 04:04.650
make sure that our edge nodes in each of the sites have not only their taps

91
04:04.650 --> 04:09.690
used for insight communications and tunnels, but also the R taps they're going

92
04:09.690 --> 04:13.400
to need if they need to communicate between the two sites.

93
04:13.400 --> 04:17.270
And an example of that would be this VM here on a common segment that needs to

94
04:17.270 --> 04:20.400
communicate with this VM on that same common segment.

95
04:20.400 --> 04:24.430
The actual communication path would go from the local ESXi host the transport

96
04:24.430 --> 04:28.030
node and the edge nodes here in site one would use the R tap addresses as they

97
04:28.030 --> 04:30.400
communicate with the edge nodes in site two.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

97
04:28.030 --> 04:30.400
communicate with the edge nodes in site two.

98
04:30.400 --> 04:34.830
So the next step in our journey then is to implement the R tap addresses on the

99
04:34.830 --> 04:37.400
edge nodes here in site one and site two.

100
04:37.400 --> 04:41.400
And we'll do that in the next video. So I'll see you there in just a moment.