WEBVTT

1
00:00.000 --> 00:02.320
So now that we have DHCP services,

2
00:02.320 --> 00:05.120
we should be able to place VMs on these three networks

3
00:05.120 --> 00:07.520
and verify that they get an IP address,

4
00:07.520 --> 00:08.720
they can connect to the internet,

5
00:08.720 --> 00:10.400
and they can also resolve names

6
00:10.400 --> 00:13.680
leveraging this DNS server up here that's currently in place.

7
00:13.680 --> 00:16.200
This also gives a great opportunity right now

8
00:16.200 --> 00:20.280
to do troubleshooting should any of this connectivity not work.

9
00:20.280 --> 00:22.400
And again, it's better to figure it out now

10
00:22.400 --> 00:24.800
than have some weird error later

11
00:24.800 --> 00:26.240
where the whole problem was due

12
00:26.240 --> 00:28.880
to basic infrastructure not being in place.

13
00:28.880 --> 00:31.240
So without further ado, let's go to the vSphere client
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

13
00:28.880 --> 00:31.240
So without further ado, let's go to the vSphere client

14
00:31.240 --> 00:34.800
and let's place a VM on each of the subnets and test it.

15
00:34.800 --> 00:36.800
So here back at the vSphere client,

16
00:36.800 --> 00:40.840
let me just take a look at my entire laundry list of VMs

17
00:40.840 --> 00:42.840
and let me see if I have one we can currently use.

18
00:42.840 --> 00:45.560
So if we didn't have a VM, we could simply deploy one.

19
00:45.560 --> 00:47.040
Here I've got some tiny VMs,

20
00:47.040 --> 00:51.000
they are even appropriately named tiny Linux on 10, 11, 11

21
00:51.000 --> 00:53.360
and 10, 12, 12 and 10, 13, 13.

22
00:53.360 --> 00:56.280
However, I'm not sure that they're on the right subnets or not.

23
00:56.280 --> 00:59.200
So let's go to the network tab here

24
00:59.200 --> 01:02.920
and let's first go to VLAN 11, that port group.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

24
00:59.200 --> 01:02.920
and let's first go to VLAN 11, that port group.

25
01:02.920 --> 01:04.720
And then from here, go to VMs,

26
01:04.720 --> 01:06.480
I'm gonna minimize the recent tasks.

27
01:06.480 --> 01:09.400
And currently I've got no VMs there at all.

28
01:09.400 --> 01:12.520
So let's see where are those guys hanging out.

29
01:12.520 --> 01:14.600
I think they're hanging out right here.

30
01:14.600 --> 01:16.120
All right, so there they are.

31
01:16.120 --> 01:17.640
So let me grab this tiny little VM here

32
01:17.640 --> 01:19.800
that's currently on this port group.

33
01:19.800 --> 01:21.640
And let me right click on that port group

34
01:21.640 --> 01:23.600
and migrate VMs to another network.

35
01:23.600 --> 01:27.600
And let's go ahead and migrate over to management VLAN 11,

36
01:27.600 --> 01:30.960
click on next, we'll grab that one little VM right there
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

36
01:27.600 --> 01:30.960
click on next, we'll grab that one little VM right there

37
01:30.960 --> 01:31.880
and click on next.

38
01:31.880 --> 01:33.960
And that's gonna very quickly and easily move

39
01:33.960 --> 01:35.880
that little VM over.

40
01:35.880 --> 01:38.640
And it says some tasks could not be completed.

41
01:38.640 --> 01:42.200
So the problem with VM is that it currently is

42
01:42.200 --> 01:45.680
being supported on Blue One, which is in maintenance mode.

43
01:45.680 --> 01:48.440
And it also has its files on the data store on Blue One.

44
01:48.440 --> 01:52.760
So let me go ahead and let me take those other three ESXi hosts.

45
01:52.760 --> 01:56.200
I'm gonna go to host here and select all of them, right click.

46
01:56.200 --> 01:59.760
And let's say you can all come out of maintenance mode right now.

47
01:59.760 --> 02:02.400
So we'll exit maintenance mode, click on yes.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

47
01:59.760 --> 02:02.400
So we'll exit maintenance mode, click on yes.

48
02:02.400 --> 02:06.360
And then I'll simply go ahead and migrate that VM over to,

49
02:06.360 --> 02:08.400
let's say, Blue Four or five or six.

50
02:08.400 --> 02:10.640
So we'll go back to the VM and templates view,

51
02:10.640 --> 02:13.920
grab that little Linux machine, right click and do a migrate.

52
02:13.920 --> 02:17.080
And let's change both compute resource and storage,

53
02:17.080 --> 02:21.800
click on next and let me go ahead and place this on Blue Four

54
02:21.800 --> 02:23.080
and click on next.

55
02:23.080 --> 02:25.400
And for storage, let's go ahead and put on a shared data store.

56
02:25.400 --> 02:29.760
Let's use iSCSI 2 and I'll use thin provisioning in my lab here

57
02:29.760 --> 02:31.040
and click on next.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

57
02:29.760 --> 02:31.040
and click on next.

58
02:31.040 --> 02:33.680
And for the actual network, we wanna put that

59
02:33.680 --> 02:35.120
on the management network.

60
02:35.120 --> 02:38.840
So we'll go ahead and say VDS1, VLAN 11 Management Network.

61
02:38.840 --> 02:42.080
That's our port group name, click on next and click on finish.

62
02:42.080 --> 02:42.920
All right.

63
02:42.920 --> 02:44.720
And let's take this one here that has the name

64
02:44.720 --> 02:46.880
of Tiny Linux 10, 12, 12.

65
02:46.880 --> 02:51.160
We'll right click and make sure it's on a host four, five or six.

66
02:51.160 --> 02:52.920
And also on a shared data store.

67
02:52.920 --> 02:55.680
So we'll go ahead and change both compute resource and storage.

68
02:55.680 --> 03:00.400
And currently it's on Blue One, DS1 being hosted by Blue One
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

68
02:55.680 --> 03:00.400
And currently it's on Blue One, DS1 being hosted by Blue One

69
03:00.400 --> 03:01.640
and let's click on next.

70
03:01.640 --> 03:04.160
And let's go ahead and let's get a host for nap

71
03:04.160 --> 03:07.360
and let's put on five as an example, click on next

72
03:07.360 --> 03:09.240
and then we'll choose a shared data store.

73
03:09.240 --> 03:11.880
iSCSI 2 will work and do thin provisioning.

74
03:11.880 --> 03:13.120
That's great next.

75
03:13.120 --> 03:16.480
And then we'll put this guy on VLAN 12

76
03:16.480 --> 03:18.680
by using that port group there and clicking on next.

77
03:18.680 --> 03:20.480
And then finish, great, great, great.

78
03:20.480 --> 03:23.080
And then with the same thing for 13 right here, right click,

79
03:23.080 --> 03:25.240
go to migrate and we'll change storage

80
03:25.240 --> 03:27.440
and the compute resource, click on next.

81
03:27.440 --> 03:31.480
Let's put that on host six and click on next.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

81
03:27.440 --> 03:31.480
Let's put that on host six and click on next.

82
03:31.480 --> 03:33.280
We'll choose iSCSI 2 once again

83
03:33.280 --> 03:37.360
and also specify we want a thin provisioning and click on next.

84
03:37.360 --> 03:41.000
And then we'll put this guy on VLAN 13 and click on next.

85
03:41.000 --> 03:41.840
All right, that looks good.

86
03:41.840 --> 03:42.960
We'll click on finish.

87
03:42.960 --> 03:45.640
And then just to verify, put those on the right subnets.

88
03:45.640 --> 03:48.040
Let's go back to our networking tab here

89
03:48.040 --> 03:51.480
and if we go to VLAN 11 port group and go to VMs,

90
03:51.480 --> 03:52.920
perfect, let me power that one on.

91
03:52.920 --> 03:54.360
So we'll power that on.

92
03:54.360 --> 03:57.560
And let's go to the front end here to that network.

93
03:57.560 --> 03:58.600
And there's this tiny Linux.

94
03:58.600 --> 04:00.240
We'll right click, right click, great, great, great,
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

94
03:58.600 --> 04:00.240
We'll right click, right click, great, great, great,

95
04:00.240 --> 04:01.080
power it on.

96
04:01.080 --> 04:05.600
And then if we go to VLAN 13 and there is no,

97
04:05.600 --> 04:07.240
I thought we moved it there.

98
04:07.240 --> 04:09.160
I must not have.

99
04:09.160 --> 04:12.000
Let's go back and fix that.

100
04:12.000 --> 04:16.360
So let's go to this tiny Linux 10, 13, 13, right click.

101
04:16.360 --> 04:19.520
Well, migrate and I'm going to change everything on that.

102
04:19.520 --> 04:23.880
So I want to put that on blue six and I want to put that

103
04:23.880 --> 04:27.240
on the eyes because you to data store, thin provisioning.

104
04:27.240 --> 04:30.640
And I want this one on VLAN 13, which I thought I did before
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

104
04:27.240 --> 04:30.640
And I want this one on VLAN 13, which I thought I did before

105
04:30.640 --> 04:33.520
but must not have click on next and finish.

106
04:33.520 --> 04:34.360
Oh, you know what?

107
04:34.360 --> 04:36.040
Maybe I picked the other VM I did.

108
04:36.040 --> 04:36.880
Okay.

109
04:36.880 --> 04:40.720
So I relocated the mint on 10, 13 and that's still going.

110
04:40.720 --> 04:42.640
So when we're done, we're going to have the tiny Linux

111
04:42.640 --> 04:46.000
and also mint Linux, which is a slightly bigger distribution.

112
04:46.000 --> 04:47.880
And that's why it's still taking a little bit more time.

113
04:47.880 --> 04:48.720
All right, fair enough.

114
04:48.720 --> 04:52.200
So now if we go back to the networking tab here for VLAN 11,

115
04:52.200 --> 04:54.920
I've got this little VM for VLAN 12.

116
04:54.920 --> 04:57.840
I've got this little VM and for VLAN 13,

117
04:57.840 --> 05:01.440
I've got this little VM and the mint is on its way.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

117
04:57.840 --> 05:01.440
I've got this little VM and the mint is on its way.

118
05:01.440 --> 05:02.280
Fantastic.

119
05:02.280 --> 05:03.680
So let me power this on and let's test.

120
05:03.680 --> 05:06.920
So we'll go to power, power on and let me bring up remote

121
05:06.920 --> 05:08.920
consoles to all three of those VMs.

122
05:08.920 --> 05:11.200
So we'll start with this one, we'll launch a remote console.

123
05:11.200 --> 05:13.480
In fact, let me get a console to each one of those

124
05:13.480 --> 05:15.120
and then we'll do some quick testing.

125
05:15.120 --> 05:18.000
All right, so here is our first one right here.

126
05:18.000 --> 05:20.520
In fact, let me go ahead and make that a little bit bigger.

127
05:20.520 --> 05:23.440
So we'll do an IF config just to make sure it got an IP address

128
05:23.440 --> 05:24.680
and it did, then we'll do a ping.

129
05:24.680 --> 05:27.960
Let's go to www.vmware.com.

130
05:27.960 --> 05:29.440
(laughs)

131
05:29.440 --> 05:30.280
That looks great.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

131
05:29.440 --> 05:30.280
That looks great.

132
05:30.280 --> 05:35.280
So it did name resolution via the server up at 10.10.10.100.

133
05:35.280 --> 05:39.480
So we did a ping to 10.10.10.100.

134
05:39.480 --> 05:42.080
That also confirms connectivity up there as well.

135
05:42.080 --> 05:42.920
Fantastic.

136
05:42.920 --> 05:47.280
So from a DNS perspective and from a basic internet access

137
05:47.280 --> 05:50.600
from the VLAN 11, we are good to go.

138
05:50.600 --> 05:52.840
So let me go ahead and move that to the side.

139
05:52.840 --> 05:54.840
And let's try VM in VLAN 12.

140
05:54.840 --> 05:56.760
Those do a ping out to Google.com.

141
05:56.760 --> 05:58.640
Yeah, sure enough, it's working, that's great.

142
05:58.640 --> 06:00.920
And let's also test from VLAN 13.
WEBVTT
X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000

142
05:58.640 --> 06:00.920
And let's also test from VLAN 13.

143
06:00.920 --> 06:02.840
So here's our little VLAN 13 machine

144
06:02.840 --> 06:07.200
and we'll do a ping out to www.cbtnuggets.com.

145
06:07.200 --> 06:09.520
And that's working great, fantastic.