WEBVTT 1 00:00.000 --> 00:03.680 So as we continue our journey here, we just created the new transport zone. 2 00:03.680 --> 00:06.720 Even though we have this transport zone, which we're going to create a segment 3 00:06.720 --> 00:07.520 and put in it, 4 00:07.520 --> 00:12.880 we need to also tell our edge devices that we want them to be included as part 5 00:12.880 --> 00:13.440 of supporting 6 00:13.440 --> 00:17.260 segments in that new transport zone. So let's also take a moment right here, go 7 00:17.260 --> 00:17.840 to both of our 8 00:17.840 --> 00:21.840 edges and say, "Hey, you know what? In addition to the overlay transport zone 9 00:21.840 --> 00:22.720 that you're supporting, 10 00:22.720 --> 00:26.860 please also support segments in this new transport zone for VLAN-backed 11 00:26.860 --> 00:28.480 segments that we just created." 12 00:28.480 --> 00:32.240 So let's make a road trip over to edge one, edge two, and we'll train them that WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 12 00:28.480 --> 00:32.240 So let's make a road trip over to edge one, edge two, and we'll train them that 13 00:32.240 --> 00:33.040 we want them both 14 00:33.040 --> 00:36.850 to support segments that are going to be put into that new transport zone. So 15 00:36.850 --> 00:37.520 to do that, 16 00:37.520 --> 00:41.830 with the system tab selected in the NSX manager, we'll head over on the left, 17 00:41.830 --> 00:42.640 expand fabric if 18 00:42.640 --> 00:48.050 it isn't already, and click on nodes, which in this flavor of NSX is referring 19 00:48.050 --> 00:49.360 to edge nodes. 20 00:49.360 --> 00:54.160 So with the nodes selected on the left, let's go ahead and start with edge one. 21 00:54.160 --> 00:54.400 So we'll click 22 00:54.400 --> 00:58.070 on edge one, and here in the overview is showing that it's currently only set 23 00:58.070 --> 00:59.600 up to support the 24 00:59.600 --> 01:04.610 overlay transport zone called our AB overlay TZ, and we want to also add on top WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 24 00:59.600 --> 01:04.610 overlay transport zone called our AB overlay TZ, and we want to also add on top 25 01:04.610 --> 01:05.840 of that our new 26 01:05.840 --> 01:10.530 VLAN-backed transport zone. So we'll click on the pencil to go ahead and edit, 27 01:10.530 --> 01:11.120 and then here for 28 01:11.120 --> 01:14.620 transport zones that's being supported by edge one, we'll just use the drop 29 01:14.620 --> 01:16.160 down and we'll add to it 30 01:16.160 --> 01:20.240 our new VLAN-backed transport zone, so now supporting both of them and we'll 31 01:20.240 --> 01:21.600 click on save. So once 32 01:21.600 --> 01:26.330 this is done, we'll do the same exact process for edge two. So we'll select 33 01:26.330 --> 01:27.600 edge two, we'll click on 34 01:27.600 --> 01:31.280 the pencil for edge two to edit it, and then here for edge two for the WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 34 01:27.600 --> 01:31.280 the pencil for edge two to edit it, and then here for edge two for the 35 01:31.280 --> 01:32.640 transport zones it supports, 36 01:32.640 --> 01:37.230 we use the drop down and say please also support segments in this new transport 37 01:37.230 --> 01:38.080 zone should they be 38 01:38.080 --> 01:41.240 created, which we'll do next, and we'll click on save. And let's verify that 39 01:41.240 --> 01:42.400 real quick, here's edge 40 01:42.400 --> 01:47.300 one, it supports these two transport zones, fantastic, here's edge two, and it 41 01:47.300 --> 01:48.800 's showing it supports those 42 01:48.800 --> 01:52.690 two transport zones as well. So that looked great, so our next step is to 43 01:52.690 --> 01:55.440 create an actual VLAN-based 44 01:55.440 --> 01:59.940 segment that will include as part of that new transport zone. So to create a 45 01:59.940 --> 02:00.720 new segment, we're WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 45 01:59.940 --> 02:00.720 new segment, we're 46 02:00.720 --> 02:04.120 going to click up here on networking on the top and on the left under 47 02:04.120 --> 02:05.600 connectivity, we'll click 48 02:05.600 --> 02:09.560 right here on segments. So here are our two overlay segments in here in the 49 02:09.560 --> 02:10.720 transport zone name 50 02:10.720 --> 02:15.470 column, it also is showing us the type. So these are two segments of type 51 02:15.470 --> 02:16.480 overlay, and we want to 52 02:16.480 --> 02:20.820 create a new one that's of type VLAN. So we'll click on add segment, and let's 53 02:20.820 --> 02:21.680 call this external 54 02:21.680 --> 02:26.000 segment 192 that way when I see it, we'll know exactly what it is, this is 55 02:26.000 --> 02:27.120 going to represent 56 02:27.120 --> 02:31.090 a VLAN-backed segment, and on that VLAN-backed segment, which I'm going to use WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 56 02:27.120 --> 02:31.090 a VLAN-backed segment, and on that VLAN-backed segment, which I'm going to use 57 02:31.090 --> 02:32.320 as VLAN-zero, 58 02:32.320 --> 02:37.200 it's my 192 168 one network. And so for the connected gateway, we're not going 59 02:37.200 --> 02:38.080 to connect this to a 60 02:38.080 --> 02:41.180 gateway now, it's a temptation right here, so you know what, let's go ahead and 61 02:41.180 --> 02:42.160 connect this to 62 02:42.160 --> 02:45.060 one of our gateways, but what we're going to do if we want fault tolerance is 63 02:45.060 --> 02:45.520 we're going to create 64 02:45.520 --> 02:49.870 the segment, and then in a separate step, we'll go ahead and associate two 65 02:49.870 --> 02:51.120 logical interfaces 66 02:51.120 --> 02:54.990 on our tier zero gateway that are both connected to this segment for fault 67 02:54.990 --> 02:56.400 tolerance, one interface 68 02:56.400 --> 03:00.120 using edge one and a second interface using edge two. So for now, we're just WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 68 02:56.400 --> 03:00.120 using edge one and a second interface using edge two. So for now, we're just 69 03:00.120 --> 03:01.440 creating the segment, 70 03:01.440 --> 03:05.750 not connecting it to a gateway, and then for the transport zone it belongs to, 71 03:05.750 --> 03:06.960 we want to specify 72 03:06.960 --> 03:11.180 our VLAN-backed TZ right here, and that's also how it knows what type of 73 03:11.180 --> 03:12.560 segment this is going to be, 74 03:12.560 --> 03:16.720 is it going to be a overly segment, or is it going to be a VLAN-based segment? 75 03:16.720 --> 03:17.760 And because we selected a 76 03:17.760 --> 03:22.070 transport zone that was of type VLAN, it now knows or is going to create this 77 03:22.070 --> 03:23.440 external segment also as 78 03:23.440 --> 03:27.770 a VLAN-backed segment. So they go ahead and collapse the left-hand side, gives 79 03:27.770 --> 03:29.120 a little bit more room, 80 03:29.120 --> 03:34.290 and now it's asking for what VLAN do we want to associate with this segment. So WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 80 03:29.120 --> 03:34.290 and now it's asking for what VLAN do we want to associate with this segment. So 81 03:34.290 --> 03:35.520 for my topology, 82 03:35.520 --> 03:40.940 I need no 802.1q tagging whatsoever, because it's on my effectively my native V 83 03:40.940 --> 03:42.000 LAN-VLAN one. 84 03:42.000 --> 03:46.440 So I'm going to put a zero here, and that simply says, okay, no tagging. So if 85 03:46.440 --> 03:48.240 we had our connectivity 86 03:48.240 --> 03:53.080 between our NSX environment and our physical network, if it was VLAN-20, we put 87 03:53.080 --> 03:54.240 VLAN-20 here. 88 03:54.240 --> 03:59.120 If it was VLAN-70, we put VLAN-70 here. In my case, I'm not using tagging on my 89 03:59.120 --> 03:59.920 192.1 90 03:59.920 --> 04:03.740 state one network. There's no 802.1q tags associated with it. So I'm going to WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 90 03:59.920 --> 04:03.740 state one network. There's no 802.1q tags associated with it. So I'm going to 91 04:03.740 --> 04:05.440 put zero to represent 92 04:05.440 --> 04:09.360 no tagging, no special VLAN assignment. And that's all the information I 93 04:09.360 --> 04:10.160 specify right here, 94 04:10.160 --> 04:14.480 the name, the fact that it's in a zone that's a VLAN-backed transport zone, 95 04:14.480 --> 04:15.120 which makes it a 96 04:15.120 --> 04:19.130 VLAN-backed segment, and then which VLAN to associate this with. And everything 97 04:19.130 --> 04:20.000 else, I'm going to leave 98 04:20.000 --> 04:23.900 as their defaults, and we're going to scroll down and click right here on Save. 99 04:23.900 --> 04:24.880 All right, so it 100 04:24.880 --> 04:28.280 created it, now it's giving us the opportunity to continue editing it. I don't 101 04:28.280 --> 04:29.040 need any further 102 04:29.040 --> 04:33.160 edits right now, so I'm going to click on No. And now we have this new segment. WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 102 04:29.040 --> 04:33.160 edits right now, so I'm going to click on No. And now we have this new segment. 103 04:33.160 --> 04:33.920 Also take a look 104 04:33.920 --> 04:39.290 here. It shows that the type is VLAN-based. So this segment, external segment 105 04:39.290 --> 04:40.880 192, if we expand it 106 04:40.880 --> 04:43.920 here, it shows the details as well. It's in this transport zone, which is a V 107 04:43.920 --> 04:44.960 LAN-backed transport 108 04:44.960 --> 04:48.820 zone. And the VLAN we're using is nothing. So effectively, no tagging. So we'll 109 04:48.820 --> 04:49.840 collapse that. 110 04:49.840 --> 04:54.160 So now what do we have? We go back to System and Nodes, we have two edge nodes 111 04:54.160 --> 04:55.440 that both support 112 04:55.440 --> 05:01.400 VLAN-backed transport zone. And we also now have a VLAN-backed segment right WEBVTT X-TIMESTAMP-MAP=LOCAL:00:00:00.000,MPEGTS:900000 112 04:55.440 --> 05:01.400 VLAN-backed transport zone. And we also now have a VLAN-backed segment right 113 05:01.400 --> 05:02.560 here that's associated 114 05:02.560 --> 05:06.960 with this transport zone. And also this external segment is going to use VLAN- 115 05:06.960 --> 05:07.520 zero.