1
00:00:00,000 --> 00:00:12,120
So if you want to, before generating it, you can have a look at the dracut.conf.

2
00:00:12,120 --> 00:00:15,320
And oh, the dracut.conf, as you can see, is no longer used.

3
00:00:15,320 --> 00:00:19,639
You really need to go into etcdracut.conf.d.

4
00:00:19,639 --> 00:00:26,320
So let's check out etcdracut.conf.d for all the different drop-in files.

5
00:00:26,320 --> 00:00:27,320
Nothing.

6
00:00:27,320 --> 00:00:35,240
Let's talk about usrlib dracut.conf.d.

7
00:00:35,240 --> 00:00:39,880
There we have the standard configuration, and here you can see what is going on.

8
00:00:39,880 --> 00:00:42,160
So we have a 0 1 distconf.

9
00:00:42,160 --> 00:00:49,599
Well, I can tell you, 0 1 0 1 distconf, that's your distribution configuration.

10
00:00:49,599 --> 00:00:54,360
And here you can see everything that is inside.

11
00:00:54,360 --> 00:00:58,439
Lots of parameters telling where everything is going on.

12
00:00:58,439 --> 00:01:03,520
Not too much to do here, but that is the essence of the dracut configuration.

13
00:01:03,520 --> 00:01:07,040
It detects kernel drivers that are currently loaded.

14
00:01:07,040 --> 00:01:10,839
So probably a much better idea is to use lsmod.

15
00:01:10,839 --> 00:01:14,959
And if needed, use modprobe to get your kernel driver included.

16
00:01:14,959 --> 00:01:20,680
And then you can use dracut-f, which will generate your new initramfs.

17
00:01:20,680 --> 00:01:24,760
Now, generating a new initramfs is serious business.

18
00:01:24,760 --> 00:01:28,519
So after generating it, do not forget to reboot

19
00:01:28,519 --> 00:01:32,760
to ensure that your new initramfs is working.

20
00:01:32,760 --> 00:01:36,879
And if it is not, you select the rescue option from the boot menu.

21
00:01:36,879 --> 00:01:40,959
The rescue option will always work and will allow you to get better.

22
00:01:40,959 --> 00:01:45,800
As you see, it took a while, so I want to make for sure that it's still working,

23
00:01:45,800 --> 00:01:47,559
which is why I am rebooting.

24
00:01:51,199 --> 00:01:55,279
Now, in the boot procedure, we have just seen a lot of green and not much red,

25
00:01:55,279 --> 00:01:58,480
and I see my login prompt again.

26
00:01:58,480 --> 00:02:00,919
And that makes that we have confirmed

27
00:02:00,919 --> 00:02:04,559
that the dracut configuration we just recreated is working.