1 00:00:07,980 --> 00:00:18,270 So you have configure your first line interface and now it's time to enable its DCP service at the ATP 2 00:00:18,270 --> 00:00:29,670 server running on your interface letting any client that connects to that interface get an IP from it 3 00:00:29,810 --> 00:00:38,680 or no let's see how it is done and what else can be configured on your HP server. 4 00:00:38,680 --> 00:00:41,740 Let's move on to one of our interfaces 5 00:00:44,600 --> 00:00:49,500 you know let's edit and you port of Port beach. 6 00:00:49,510 --> 00:01:05,520 We haven't touched up until now let's quickly configure it as the internal layer and let assigning a 7 00:01:05,530 --> 00:01:08,510 role as a lamb. 8 00:01:08,510 --> 00:01:13,550 And now let's assign a new 9 00:01:17,870 --> 00:01:22,930 new IP address for that interface. 10 00:01:24,920 --> 00:01:31,210 Let's enable administrative access through H2 Pierce and HDTV. 11 00:01:31,290 --> 00:01:35,060 Let's add up let's add a ping also. 12 00:01:35,530 --> 00:01:38,140 And now let's enable the ATP server. 13 00:01:38,440 --> 00:01:44,840 Now we don't have to use the whole pool. 14 00:01:44,930 --> 00:01:56,320 We can use specific number of IP addresses that will be assigned to anyone who connects through that 15 00:01:56,320 --> 00:01:57,190 interface. 16 00:01:57,190 --> 00:02:03,310 Let's assume that we would only want 40 IP addresses. 17 00:02:03,310 --> 00:02:12,400 So the pool will start from 10 or turned a blind or two up to 10 to 10 the nine dot 42. 18 00:02:12,400 --> 00:02:14,620 Now the subnet stays the same. 19 00:02:14,650 --> 00:02:22,690 It's the same 24 subnet as we configure and the default gateway also stays the same. 20 00:02:22,690 --> 00:02:33,220 The default gateway for anyone who connects to our LAN interface is actually the IP address of our interface 21 00:02:35,360 --> 00:02:44,870 the DNS server can be the same as our system DNS and it can also be another DNS server if we choose 22 00:02:44,870 --> 00:02:45,230 to 23 00:02:56,330 --> 00:03:03,110 and then we move on to the more advanced options of the DCP server. 24 00:03:03,110 --> 00:03:11,360 The fact that we can configure a DCP server on our interface doesn't mean that we have to. 25 00:03:11,360 --> 00:03:20,060 There are times that we already have in our organization a DCP server already configured on Windows 26 00:03:20,060 --> 00:03:23,520 Server or our Linux server. 27 00:03:23,570 --> 00:03:35,090 Now we can use the relay mode to forward any DCP request that comes from clients that are connected 28 00:03:35,210 --> 00:03:44,660 to our interface to this specific DCP server that is already serving our organization. 29 00:03:44,900 --> 00:03:52,970 But in our case we will use the internal the ACP server that is in our work. 30 00:03:53,030 --> 00:03:59,270 We move on to two more additional capabilities for DCP server. 31 00:03:59,270 --> 00:04:07,540 The first one is the additional DCP options and the second one is the Mac reservation plus access control. 32 00:04:07,610 --> 00:04:16,850 We will look at the DCP options at our next video where we will also configure the DCP option. 33 00:04:16,850 --> 00:04:25,410 But let's start with the Mac reservation plus access control direct reservation plus access control 34 00:04:25,980 --> 00:04:36,480 allows us to bind a specific IP to a specific MAC address or maybe to block a specific MAC address from 35 00:04:36,480 --> 00:04:38,560 getting an IP address. 36 00:04:38,670 --> 00:04:41,850 So let's create a new mac address 37 00:04:47,710 --> 00:04:48,220 all right. 38 00:04:48,270 --> 00:04:51,970 And now we can see that we have treat options. 39 00:04:52,150 --> 00:04:55,210 The first one is reserved IP. 40 00:04:55,210 --> 00:04:57,240 The second one is a IP. 41 00:04:57,250 --> 00:05:09,020 And the third one is block IP first option reserved IP allows us to reserve a specific IP address. 42 00:05:09,060 --> 00:05:16,480 Let's choose the 10 the 10 the nine Dot. 43 00:05:16,490 --> 00:05:21,010 Twenty three to that specific MAC address. 44 00:05:22,600 --> 00:05:32,260 Now the second option is sine IP will make sure that the same device with that MAC address will get 45 00:05:32,260 --> 00:05:44,500 an IP from the DCP server and will get the same IP address time and time again assuming that it slips. 46 00:05:44,500 --> 00:05:49,300 Time has not expired. 47 00:05:49,420 --> 00:06:00,970 Now the third option is quite self explanatory device with that MAC address will not get an IP address 48 00:06:00,970 --> 00:06:02,110 from that pool.