WEBVTT

00:07.950 --> 00:18.120
So you have set up your 48 and it's now time to connect your local area network into one of its interfaces.

00:18.120 --> 00:26.490
On the other side on the Internet facing interface your when interface you will connect it to your ISP

00:26.580 --> 00:36.420
and assume that you have dozens or even hundreds of computers and only one public IP address.

00:36.420 --> 00:37.770
What can you do.

00:37.770 --> 00:49.080
Well you use net network address translation you're 48 acts as an agent that translates private IP addresses

00:49.590 --> 00:56.000
into your one public IP address without net.

00:56.040 --> 01:02.700
We would have need to purchase a full class address range for our computers.

01:02.720 --> 01:12.750
Now what does that do 48 actually changes the IP address clear of every packet.

01:13.110 --> 01:24.080
So just imagine that by using a 24 subnet you can use up to 200 and 54 IP addresses.

01:24.120 --> 01:25.310
That's amazing.

01:25.320 --> 01:29.040
Using only one public IP address.

01:29.040 --> 01:31.880
Now there are several types of Net.

01:31.890 --> 01:33.520
We will look at them.

01:33.520 --> 01:38.190
There is the part which is the port address translation in 48.

01:38.190 --> 01:41.010
We call it net overload.

01:41.010 --> 01:46.090
There is the central net there is the virtual IP.

01:46.140 --> 01:55.320
But before we go over to the different types of net we need to understand or to distinguish between

01:55.350 --> 02:00.880
two types of net for an outgoing traffic.

02:01.050 --> 02:06.070
We use a source net for incoming traffic.

02:06.120 --> 02:16.370
We use destination net and net as you will see is part of your firewall policy.

02:16.460 --> 02:23.240
It is integrated with it and you will use it in different scenarios.