1
00:00:07,640 --> 00:00:17,370
We are moving to this second VPN technology and that is IP SEC now IP SEC is different than SSL GP and

2
00:00:17,790 --> 00:00:20,790
it uses different protocols.

3
00:00:20,790 --> 00:00:29,800
It is a bit more complicated to setup you have to have your IP SEC aligned in order to use it.

4
00:00:29,820 --> 00:00:39,950
It doesn't have any web mode and it defines two phases to the creation of IP Sec.

5
00:00:40,080 --> 00:00:48,980
The first phase is used between the remote peers to authenticate and establish a secure connection.

6
00:00:49,000 --> 00:00:55,180
The second phase is used to create the VPN tunnel.

7
00:00:55,210 --> 00:01:01,390
Now as we will go on you will see that you also have to create a static crowd.

8
00:01:01,390 --> 00:01:07,090
You will have to create the IP SEC security policies.

9
00:01:07,090 --> 00:01:07,590
All right.

10
00:01:07,600 --> 00:01:08,950
So let's start

11
00:01:14,440 --> 00:01:14,690
now.

12
00:01:14,720 --> 00:01:16,880
Let's move over to VPN.

13
00:01:16,910 --> 00:01:17,960
We can.

14
00:01:17,960 --> 00:01:28,940
Since IP set VPN is sometimes complicated 48 made it very easy to create an IP SEC tunnel.

15
00:01:28,940 --> 00:01:38,810
It actually has an IP SEC tunnel templates that you can use or the IP SEC wizards that allows you to

16
00:01:38,810 --> 00:01:51,050
create an IP SEC easily between two sides or between a remote user and an IP SAC Gateway such as the

17
00:01:51,140 --> 00:01:56,550
48 you can create IP set between to 48.

18
00:01:56,780 --> 00:02:09,400
You can create IP SEC between 48 and another IP SEC supported clients and you can create an IP SEC between

19
00:02:09,400 --> 00:02:20,820
a 40 client 48 IP SEC client and a 40 Kate but we will set up a custom IP sec so we will go over it

20
00:02:20,830 --> 00:02:29,210
through the different phases and that will make everything much more clearer.

21
00:02:29,220 --> 00:02:36,900
Now let's look at the topology users from our local area network which is the one hundred ninety two

22
00:02:36,900 --> 00:02:39,490
168 1 0.

23
00:02:39,630 --> 00:02:48,150
We'll be able to connect directly to the remote local area network at the tender 0 that 1 0 as if they

24
00:02:48,150 --> 00:02:55,290
were part of that local area network between the two network between the two private networks.

25
00:02:55,290 --> 00:03:04,350
We have 248 that will establish the IP SEC tunnel our own for a gate which is the HQ for the gate has

26
00:03:04,350 --> 00:03:11,790
the public IP address of eighty four two hundred twenty eight sixty nine two hundred and thirty four

27
00:03:12,360 --> 00:03:21,240
and the remote 48 has the public IP address of eighty two twenty two forty three and a level.