HiCommand Dynamic Link Manager User's Guide (for Windows(R))

3.7.1 Preparations for setting the HDLM functionality

For setting the HDLM functionality, this chapter describes steps involved in starting the Options window of HDLM and how to check the settings before the change by using the dlnkmgr command's set operation.

Organization of this subsection

(1) Opening the Options window (when using the HDLM GUI)

(2) Checking the current settings (when using the dlnkmgr command)

(1) Opening the Options window (when using the HDLM GUI)

When you set the HDLM functionality by using the HDLM GUI, start the Path Management window and then the Options window in accordance with the following procedure.

To open the Options window:

Log on to Windows as a member of Administrators group.
The Path Management window cannot be displayed if you logged on to Windows as a user other than a member of the Administrators group.

From the Start menu, select Programs, Dynamic Link Manager, and then HDLM GUI.
The Path List view of the Path Management window is displayed.

Click the Options button.
As shown in Figure 3-4 Options window, the Options window opens with the Options window displayed.

Figure 3-4 Options window

(2) Checking the current settings (when using the dlnkmgr command)

Check the current settings by executing the following command to set the HDLM functionality by using the dlnkmgr command's set operation.

 
>dlnkmgr view -sys -sfunc
HDLM Version                   : xx-xx
Service Pack Version           : 
Load Balance                   : on(rr)
Support Cluster                : off
Elog Level                     : 3
Elog File Size(KB)             : 9900
Number Of Elog Files           : 2
Trace Level                    : 0
Trace File Size(KB)            : 1000
Number Of Trace Files          : 4
Path Health Checking           : on(30)
Auto Failback                  : off
Remove LU                      : off
Intermittent Error Monitor     : off
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = yyyy/mm/dd hh:mm:ss
>

[Contents][Back][Next]

[Trademarks]