HiCommand Dynamic Link Manager User's Guide (for Windows(R))

3.7.3 Applying the settings and closing the windows

This chapter describes steps involved in closing the Options window of the HDLM GUI and how to check the new settings by using the dlnkmgr command's set operation after the new settings are applied.

Organization of this subsection

(1) Closing the Options window (when using the HDLM GUI)

(2) Checking the new settings (when using the dlnkmgr command)

(1) Closing the Options window (when using the HDLM GUI)

Click the OK button.
The settings are applied and then the Options window is closed.

Click the Close button in the Path Management window.
The Path Management window is closed.

If you change the setting for the error log file size in the Options window, the changed value is not applied to the HDLM GUI log file dlmguin.log (n indicates a file number of 1 or 2) until HDLM GUI is restarted. When the other values are changed, click the OK button or Apply button. The changed values are applied.

(2) Checking the new settings (when using the dlnkmgr command)

When you change these settings, you can display information about all HDLM functionality settings. The following shows an example of executing the command:

 
>dlnkmgr view -sys -sfunc
HDLM Version                   : xx-xx
Service Pack Version           : 
Load Balance                   : on(rr)
Support Cluster                : off
Elog Level                     : 2
Elog File Size(KB)             : 1000
Number Of Elog Files           : 5
Trace Level                    : 1
Trace File Size(KB)            : 2000
Number Of Trace Files          : 10
Path Health Checking           : on(10)
Auto Failback                  : on(10)
Remove LU                      : on
Intermittent Error Monitor     : on(2/20)
KAPL01001-I The HDLM command completed normally. Operation name = view, completion time = yyyy/mm/dd hh:mm:ss
>

[Contents][Back][Next]

[Trademarks]