HiCommand Dynamic Link Manager User's Guide (for Windows(R))

8.2.2 Parameters

You can specify parameters only when you have executed the DLMgetras utility from the command prompt.

folder-to-which-collected-information-is-output

Specify the output folder for the information that is to be collected by the DLMgetras utility for collecting HDLM error information. The output-destination directories shown in Table 8-1 List of error information collected by the DLMgetras utility for collecting error information are created in the specified folder, and the information is collected in the output-destination folders.

-eventlogsize log-size

The utility obtains logs from each application, system, and security event log. The logs are obtained, starting from the most recent log, until the log size reaches log-size. Specify the log size in MB. The specifiable value ranges from 1 to 4096 in units of 1 MB. You cannot use this parameter together with the -eventlogtime yyyy/mm/dd parameter.

-eventlogtime yyyy/mm/dd

The utility obtains logs from each application, system, and security event log. The logs obtained are those output after 00:00 on the date yyyy/mm/dd. Specify the date in the YYYY/MM/DD format. You cannot use this parameter together with the -eventlogsize log-size parameter.

-h

Displays the format of the DLMgetras utility.

[Contents][Back][Next]

[Trademarks]