Hitachi Dynamic Link Manager Software GUI Help

5.2 Path Management window

This section explains the Path Management window. In this window, you can do the following:

• View path information.
  For details, see 3.1.3 Viewing path information.
  
• Export path information to a CSV file.
  For details, see 3.1.4 Exporting path information to a CSV file.
  
• In the path information, set the I/O count and the I/O error count to 0.
  For details, see 3.1.5 Setting the path statistics to the initial value.
  
• Change the path status.
  For details, see 3.1.6 Changing the path status.
  
• Refresh the path information.
  For details, see 3.1.7 Refreshing path information.
  
• Open the Options window.
  For details, see 3.1.8 Viewing or setting up the operating environment.
  
• View the HDLM GUI Help (this Help).

Each Path Management window shows information about the paths connected to a certain host. Since up to four Path Management windows can be open at one time, information for up to four hosts can be displayed concurrently.

Figure 5-1 Path Management window shows the Path Management window.

Figure 5-1 Path Management window

As shown in Figure 5-1 Path Management window, the Path Management window is composed of the following three frames:

• common frame
  Displays the title, logo, and buttons that are used throughout the HDLM GUI.
  
• tree frame
  Displays, in tree format, the storage subsystems and LUs that are managed by the host.
  
• view frame
  Displays the path configuration view or path list view.
  The view frame displays the Configuration view or the Path List view
  

The following description of the Path Management window is separated into explanations of each of these frames.

Organization of this section

5.2.1 Common frame

5.2.2 Tree frame

5.2.3 Path List view in the view frame

5.2.4 Configuration view in the view frame

[Contents][Back][Next]